using only the periodic table arrange the following elements in order of increasing atomic radius: polonium, thallium, astatine, radon

The formula of the hydride formed by bromine is HBr.

Bromine is a halogen element with atomic number 35, and it has a tendency to gain one electron to achieve a stable electron configuration. Hydrogen, on the other hand, has one electron to lose. When these two elements combine, bromine gains an electron from hydrogen, resulting in the formation of a bromide ion (Br^-). Since hydrogen donates its electron, it becomes a positively charged hydrogen ion (H^+). The combination of the bromide ion and the hydrogen ion results in the formation of the hydride compound HBr.

Therefore, the required formula of the hydride is HBr, which is formed by bromine.

You can learn more about hydride at

https://brainly.com/question/8376431

#SPJ11

From the balanced chemical equation:

6HBr + KBrO3 -> 3Br2 + KBr + 3H2O

We can see that the molar ratio between HBr and KBrO3 is 6:1.

For every 6 moles of HBr, we need 1 mole of KBrO3 to ensure the reaction proceeds according to the stoichiometry.

Therefore, the molar ratio of HBr to KBrO3 in this reaction is 6:1.

Learn more about molar ratios and stoichiometry in chemical reactions here:

https://brainly.com/question/30415532?referrer=searchResults

#SPJ11

By reacting 1.4 moles of aluminum with sulfuric acid, it produces 1.05 moles of hydrogen gas at standard temperature and pressure (STP). The volume of hydrogen gas can be calculated using the ideal gas law and converted to liters.

According to the balanced chemical equation [tex]2Al (s) + 3H_2SO_4[/tex]→ [tex]Al_2(SO_4)_3 + 3H_2[/tex], we can see that 2 moles of aluminum react with 3 moles of sulfuric acid to produce 3 moles of hydrogen gas. This means that for every 2 moles of aluminum, 3 moles of hydrogen gas are produced.

Given that there are 1.4 moles of aluminum, we can set up a proportion to determine the moles of hydrogen gas produced. The proportion is as follows:

(1.4 moles Al) / (2 moles Al) = (x moles H2) / (3 moles H2)

Cross-multiplying, we find that x = (1.4 moles Al) × (3 moles H2) / (2 moles Al) = 2.1 moles H2.

Since the problem asks for the volume at STP, we can use the ideal gas law, PV = nRT, where P is the pressure (standard pressure at STP is 1 atm), V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature (standard temperature at STP is 273 K).

Substituting the values, we have (1 atm) × V = (2.1 moles) × (0.0821 L·atm/(mol·K)) × (273 K).

Simplifying, we find V = (2.1 moles) × (0.0821 L·atm/(mol·K)) × (273 K) = 47.6 L.

Therefore, the volume of hydrogen gas produced when dissolving 1.4 moles of aluminum in sulfuric acid at STP is 47.6 liters.

Learn more about ideal gas law here:

https://brainly.com/question/30458409

#SPJ11

When sodium reacts with 119 grams of chlorine gas, 234 grams of NaCl are produced.

The balanced chemical equation for this reaction is 2Na + Cl2 → 2NaCl. From this equation, we can see that for every 2 moles of Na, 1 mole of Cl2 is required to produce 2 moles of NaCl.

To find the number of moles of Cl2 present in 119 grams, we first need to calculate its molecular weight, which is 70.90 g/mol. Dividing 119 grams by this value gives us 1.67 moles of Cl2. From the stoichiometry of the balanced equation, we know that 1 mole of Cl2 produces 2 moles of NaCl.

Therefore, 1.67 moles of Cl2 will produce 3.33 moles of NaCl. Finally, multiplying the number of moles by the molecular weight of NaCl (58.44 g/mol) gives us the answer: 234 grams of NaCl.

Therefore, when sodium reacts with 119 grams of chlorine gas, 234 grams of NaCl are produced.

Learn more about mole here.

https://brainly.com/questions/32707761

#SPJ11

The 149.2 grams of potassium chloride would be produced if 78 grams of potassium and 71 grams of chlorine completely reacted.

The balanced chemical equation for the reaction between potassium metal (K) and chlorine gas (Cl₂) to form solid potassium chloride (KCl) is:

2K(s) + Cl₂(g) → 2KCl(s)

This equation indicates that two atoms of potassium react with one molecule of chlorine gas to yield two molecules of potassium chloride.

The type of reaction is a combination reaction, also known as a synthesis reaction. In this type of reaction, two or more substances combine to form a single product.

To determine the mass of potassium chloride produced, we need to calculate the limiting reactant. The molar mass of potassium is approximately 39.1 g/mol, and the molar mass of chlorine is approximately 35.5 g/mol.

First, we convert the given masses of potassium (78 g) and chlorine (71 g) into moles by dividing them by their respective molar masses:

Moles of potassium = 78 g / 39.1 g/mol = 2 mol

Moles of chlorine = 71 g / 35.5 g/mol ≈ 2 mol

Since the reactants have a 1:1 stoichiometric ratio, it can be seen that both potassium and chlorine are present in the same amount. Therefore, the limiting reactant is either potassium or chlorine.

Assuming potassium is the limiting reactant, we can calculate the mass of potassium chloride produced. Since 2 moles of potassium react to form 2 moles of potassium chloride, we can use the molar mass of potassium chloride (74.6 g/mol) to calculate the mass:

Mass of potassium chloride = 2 mol × 74.6 g/mol = 149.2 g

For more such questions on potassium chloride

https://brainly.com/question/24879357

#SPJ11

The positive δg value indicates that the reaction is not spontaneous under standard conditions, meaning that the free energy of the products is higher than that of the reactants.

Therefore, additional energy input is required to drive the reaction forward. This can be achieved by increasing the temperature or by removing the product (ester) as it forms, as this will shift the equilibrium towards the product side according to Le Chatelier's principle. Alternatively, the reaction conditions can be modified to favor the formation of the ester by using an excess of one of the reactants, such as the alcohol or the acid, to shift the equilibrium towards the product side. However, this approach may also have limitations and may not be effective in all cases.

In summary, adding more acid catalyst alone may not be sufficient to drive the esterification reaction if it is non-spontaneous. The thermodynamic issue needs to be addressed by modifying the reaction conditions to favor the formation of the ester.
Read more about thermodynamic here:https://brainly.com/question/13059309
#SPJ11

Of the following did Hull believe was true about reaction potential The given answer, "d. None of the above," is correct because reaction potential was not a concept proposed by Clark Hull.

Clark Hull was a behaviorist psychologist known for his influential theories on learning and motivation, particularly his development of the Hullian theory of behavior. Reaction potential, on the other hand, was a concept introduced by another prominent psychologist, Edward Tolman. Tolman was known for his work on cognitive psychology and his ideas about purposive behavior and cognitive maps. He proposed the concept of reaction potential to describe the readiness or likelihood of an organism to engage in a particular behavior in a given situation. While Hull and Tolman were contemporaries and both made significant contributions to the field of psychology, including their respective theories on behavior, it is important to differentiate their specific ideas and terminology. In summary, Hull did not believe in or discuss reaction potential as it was Tolman's concept. The correct option is d, as none of the statements in options a, b, or c accurately represent Hull's beliefs regarding reaction potential.

Learn more about Reaction potential here:

https://brainly.com/question/23876521

#SPJ11

We find that the number of moles of H3N produced is approximately 23.6 mol. Therefore, from the reaction of 11.8 moles of N2 with H2, 23.6 moles of H3N will be produced.

Based on the balanced equation for the reaction, we can determine the stoichiometric ratio between N2 and H3N. The balanced equation for the reaction is:

N2 + 3H2 → 2NH3

From the equation, we can see that 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3.

To calculate the moles of H3N produced, we multiply the given moles of N2 by the stoichiometric ratio:

moles of H3N = moles of N2 * (moles of H3N / moles of N2)

moles of H3N = 11.8 mol * (2 mol H3N / 1 mol N2)

By performing this calculation, we find that the number of moles of H3N produced is approximately 23.6 mol. Therefore, from the reaction of 11.8 moles of N2 with H2, 23.6 moles of H3N will be produced.

To learn more about moles click here, brainly.com/question/15209553

#SPJ11

Nutria and zebra mussels are both invasive species that have had significant impacts in the United States, albeit in different ways. Nutria, also known as coypu, are large, herbivorous rodents that have caused extensive damage to wetlands and agricultural areas.

They consume vast amounts of vegetation, leading to erosion, habitat loss, and degradation of water quality. Nutria have also been known to damage levees and canals, increasing flood risks.On the other hand, zebra mussels are small freshwater mollusks that have spread rapidly throughout U.S. waterways.

They reproduce rapidly, forming dense colonies that clog water intake pipes, impairing the functioning of power plants, water treatment facilities, and municipal water supplies. Zebra mussels also have detrimental ecological impacts, outcompeting native species for resources and altering food chains.

In summary, while nutria primarily impact wetlands and agricultural areas through vegetation consumption and habitat destruction, zebra mussels have significant economic and ecological impacts by clogging infrastructure and disrupting aquatic ecosystems.

For more such questions on species

https://brainly.com/question/29308133

#SPJ11

Two of the alcohols with the chemical formula C₄H₉OH are chiral.

To determine the number of chiral alcohols among the four structural isomers with the formula C₄H₉OH, we need to examine their structures. The four possible structures are 1-butanol, 2-butanol, isobutanol, and tert-butanol.

1-Butanol and 2-butanol each have a chiral center, meaning that they exist as two mirror-image forms, or enantiomers. Isobutanol and tert-butanol, on the other hand, do not have a chiral center and are therefore achiral.

Therefore, only 1-butanol and 2-butanol are chiral alcohols among the four possible isomers with the chemical formula C₄H₉OH.

Chirality refers to the property of a molecule that is not superimposable on its mirror image. Molecules that exhibit chirality are called chiral molecules. Chiral molecules can have different physical and chemical properties than their mirror-image forms, or enantiomers, due to their different spatial arrangement of atoms.

In general, a molecule is chiral if it has a chiral center, which is a carbon atom that is bonded to four different groups. When a chiral center is present in a molecule, the molecule can exist as two mirror-image forms, or enantiomers, which are non-superimposable on one another. Chiral molecules that exist as enantiomers have the property of optical activity, which means that they can rotate the plane of polarized light.

In the case of C₄H₉OH, two of the isomers, 1-butanol and 2-butanol, have a chiral center and exist as enantiomers, while the other two isomers, isobutanol and tert-butanol, do not have a chiral center and are achiral. Therefore, only 1-butanol and 2-butanol are chiral alcohols among the four possible isomers with the chemical formula C₄H₉OH.

learn more about chiral here:

https://brainly.com/question/13701353

#SPJ11

The mass of C produced by the complete reaction of 10.0 g of A is 15.0 grams.

To determine the mass of C produced by the complete reaction of 10.0 g of A, we need to use the molar masses and the stoichiometry of the reaction.

Molar mass of C is twice the molar mass of A.

The reaction is 2A → 3C.

Let's start by finding the molar masses of A and C. Let's assume the molar mass of A is "M" g/mol. Therefore, the molar mass of C would be "2M" g/mol.

Using the molar masses, we can calculate the number of moles of A in 10.0 g of A:

Number of moles of A = Mass of A / Molar mass of A

= 10.0 g / M g/mol

= 10.0 / M mol

According to the stoichiometry of the reaction, 2 moles of A react to produce 3 moles of C. So, the number of moles of C produced can be calculated as follows:

Number of moles of C = (3/2) * Number of moles of A

= (3/2) * (10.0 / M) mol

To find the mass of C produced, we multiply the number of moles of C by its molar mass:

Mass of C = Number of moles of C * Molar mass of C

= [(3/2) * (10.0 / M) mol] * (2M g/mol)

= (3/2) * 10.0 g

= 15.0 g

Therefore, the mass of C produced by the complete reaction of 10.0 g of A is 15.0 grams.

For more such questions on mass , Visit:

https://brainly.com/question/24191825

#SPJ11

We determine the mass of C produced by the complete reaction of 10.0 g of A is 15.0 grams.

We know that molar mass of C is twice the molar mass of A.

The reaction is given as 2A → 3C.

we go ahead to  calculate the number of moles of A in 10.0 g of A:

Number of moles of A = Mass of A / Molar mass of A

Number of moles of A= 10.0 g / M g/mol

Number of moles of A= 10.0 / M mol

we do same for C according to the stoichiometry of the reaction:

Number of moles of C = (3/2) * Number of moles of A

Number of moles of C = (3/2) * (10.0 / M) mol

Mass of C = Number of moles of C * Molar mass of C

Mass of C  = [(3/2) * (10.0 / M) mol] * (2M g/mol)

Mass of C  = (3/2) * 10.0 g

Mass of C  = 15.0 g

In conclusion, the mass of C produced by the complete reaction of 10.0 g of A is 15.0 grams.

Learn more about number of moles at:

https://brainly.com/question/15356425

#SPJ4

The following is not a triprotic acid is  b.H³AsO⁴

A triprotic acid is an acid that has three acidic hydrogen atoms, which can be ionized in stages to produce three hydrogen ions (H⁺) in solution. When a triprotic acid dissolves in water, it releases H⁺ ions in three stages, with each stage producing a progressively weaker acid.

Out of the given options, H³AsO⁴ is not a triprotic acid, it is a polyprotic acid, which means that it can donate more than one hydrogen ion. Specifically, H³AsO⁴ is a tetraprotic acid, which means that it can donate four hydrogen ions. Each hydrogen ion is released in a stepwise manner, making it less acidic than a triprotic acid. In summary, the correct answer is b. H³AsO⁴ is not a triprotic acid, but a tetraprotic acid, It is important to understand the differences between these acids and their ionization behavior in solution, as it can have important implications in various applications.

Learn more about hydrogen atoms at

https://brainly.com/question/30438922

#SPJ11

The mass of the sodium salt of A- that we need to add to the buffer is [tex]M \times (0.050 x 10^{(7.35-pKa))[/tex] x V. The number of moles of the sodium salt of A- that we need is simply [tex](0.050 \times 10^{(7.35-pKa))[/tex] x V.

What is conjugate acid?

A conjugate acid is the species that is formed when a base gains a proton (H⁺). For example, in the reaction [tex]NH_3 + H_2O \rightleftharpoons NH^{4+} + OH^-[/tex], ammonia (NH₃) is a base that accepts a proton from water (H₂O) to form its conjugate acid, ammonium (NH⁴⁺).

To create a buffer with pH = 7.35, we need an acid whose pKa is close to this pH. From Example 18.5, we know that the pKa values for the three acids are:
Acetic acid ([tex]CH_3COOH[/tex]): pKa = 4.76
Hydrofluoric acid (HF): pKa = 3.15
Phosphoric acid ([tex]H_3PO_4[/tex]): pKa1 = 2.15, pKa2 = 7.20, pKa3 = 12.35
Of these, phosphoric acid has a pKa closest to the desired pH of 7.35, so we will choose it to create the buffer.
pH = pKa + log([A-]/[HA])
[A-] = [tex][HA](10^{(pH - pKa))[/tex]
[A-] = [tex]0.10 M(10^{(7.35 - 7.20))[/tex] = 0.126 M
So we need a 0.10 M solution of phosphoric acid and a 0.126 M solution of [tex]NaH_2PO_4[/tex] to create the buffer.
To find the mass of [tex]NaH_2PO_4[/tex] needed to make the 0.126 M solution, we can use the formula:
moles = concentration × volume
The volume of the 0.126 M solution we need is:
volume = 500.0 mL = 0.5000 L
So the number of moles of [tex]NaH_2PO_4[/tex] we need is:
moles = 0.126 M × 0.5000 L = 0.0630 moles
The molar mass of [tex]NaH_2PO_4[/tex] is:
(1 × 22.99) + (1 × 1.01) + (2 × 30.97) + (4 × 16.00) = 119.98 g/mol
So the mass of [tex]NaH_2PO_4[/tex] we need is:
mass = moles × molar mass = 0.0630 moles × 119.98 g/mol = 7.56 g
Therefore, we need 7.56 g of [tex]NaH_2PO_4[/tex] to make the buffer.
To find the number of moles of [tex]NaH_2PO_4[/tex] needed, we can use the formula:
moles = concentration × volume
The volume of the 0.126 M solution we need is:
volume = 500.0 mL = 0.5000 L
So the number of moles of [tex]NaH_2PO_4[/tex] we need is:
moles = 0.126 M × 0.5000 L = 0.0630 moles
Therefore, we need 0.0630 moles of [tex]NaH_2PO_4[/tex] to make the buffer.

To know more about conjugate acid visit:

https://brainly.com/question/12584785

#SPJ4

The aqueous solution that is expected to have a pH less than 7 at 25 degrees Celsius is NH_4Br (aq). This is because NH_4Br is an ammonium salt and when it dissolves in water, it undergoes hydrolysis to produce H+ ions, leading to an acidic solution.

RbC_2H_3O_2 (aq), MgCl_2 (aq), and LiNO_3 (aq) are not expected to produce an acidic solution, as they do not undergo hydrolysis to produce H+ ions.

Which aqueous solution is expected to have a pH less than 7 at 25°C? The solution that will have a pH less than 7 at 25°C is NH_4Br (aq). This is because NH_4Br is an ammonium salt that will release NH_4+ ions in water. NH_4+ ions will react with water to form NH_3 and H_3O+, leading to an acidic solution with a pH less than 7. The other compounds (RbC_2H_3O_2, MgCl_2, and LiNO_3) are not expected to produce acidic solutions.

To know more about Aqueous Solution visit-

https://brainly.com/question/26856926

#SPJ11

At 25°C, the solubility product constant (Ksp) of KNO₃ is approximately 9.72 x 10³ mol²/L² or 9.72 x 10⁻⁶ mol²/L² in scientific notation.

A type of equilibrium constant, the solubility product's value changes with temperature. Due to increasing solubility, Ksp often rises as temperature rises.

The solubility product constant (Ksp) of a sparingly soluble salt like KNO₃ is defined as the product of the concentrations (or activities) of the ions raised to their stoichiometric coefficients in the balanced equation.

The balanced chemical equation for the dissociation of KNO₃ in water is:

KNO3(s) ⇌ K⁺(aq) + NO₃⁻(aq)

At equilibrium, the concentration of KNO₃(s) is assumed to be constant and therefore its activity is 1. The equilibrium expression for the dissociation reaction is then:

Ksp = [K⁺][NO₃⁻]

To calculate the value of Ksp at 25°C, we need the solubility of KNO₃ in water at this temperature. From experimental data, we can find that the solubility of KNO₃ in water at 25°C is approximately 31.6 g/100 mL or 316 g/L.

Assuming that all the KNO₃ dissociates completely in water, the concentrations of K⁺ and NO₃⁻ ions in the saturated solution are equal to the concentration of KNO₃:

[K⁺] = [NO₃⁻] = 316 g/L / 101.1 g/mol = 3.12 mol/L

Now we can substitute the ion concentrations into the expression for Ksp:

Ksp = [K⁺][NO₃⁻] = (3.12 mol/L)² = 9.72 mol²/L²

The standard free energy change of formation (ΔG°f) of KNO₃(s) at 25°C is -494.6 kJ/mol. However, it is not necessary to use this value to calculate the Ksp.

Therefore, at 25°C, the solubility product constant (Ksp) of KNO₃ is approximately 9.72 x 10³ mol²/L² or 9.72 x 10⁻⁶ mol²/L² in scientific notation.

Learn more about solubility product on:

https://brainly.com/question/29597105

#SPJ4

(1) a. Identify the Lewis acid(s) platinum ion (Pt+2), b. Identify the Lewis base(s) ammonia molecules (NH3), c. the coordination number 6 and (2)  A coordinate covalent bond is similar to a regular covalent bond in that they both involve the sharing of electrons between atoms.

a. In the complex ion [Pt(NH3)4Cl2]+2, the Lewis acid is the platinum ion (Pt+2) because it accepts a pair of electrons from the Lewis base (NH3) to form a coordinate covalent bond. The chloride ions (Cl-) do not act as Lewis acids because they do not accept any electrons.
b. The Lewis bases in the complex ion are the ammonia molecules (NH3) because they donate a pair of electrons to form the coordinate covalent bond with the platinum ion.
c. The coordination number is 6 because there are six ligands (four NH3 molecules and two Cl- ions) bonded to the central platinum ion.
2.However, in a coordinate covalent bond, both electrons in the shared pair come from the same atom, whereas in a regular covalent bond, each atom donates one electron to the shared pair. In other words, a coordinate covalent bond involves one atom providing both electrons to the bond. Coordinate covalent bonds are usually formed between a Lewis acid and a Lewis base, where the Lewis acid accepts a pair of electrons from the Lewis base to form the bond. In contrast, regular covalent bonds are typically formed between non-metal atoms that share electrons equally.

To know more about Lewis acid visit:

https://brainly.com/question/15570523

#SPJ11

The molecule that contains an exception to the octet rule is (e) NO, nitrogen monoxide.

In general, atoms tend to form chemical bonds in a way that allows them to achieve a stable electron configuration with a full outer shell of electrons. This is known as the octet rule, where atoms strive to have eight electrons in their outermost shell. However, there are some cases where atoms can have fewer or more than eight electrons in their outer shell, resulting in exceptions to the octet rule. In the case of NO, the nitrogen atom has seven valence electrons, and the oxygen atom has six valence electrons. When they form a bond, nitrogen shares one of its electrons with oxygen, resulting in a nitrogen-oxygen bond. This leaves nitrogen with only seven electrons in its outer shell, which is one short of the octet. The molecule NO is stable because the unpaired electron in nitrogen's outer shell allows it to maintain its stability. Therefore, among the given options, the molecule NO (nitrogen monoxide) contains an exception to the octet rule, as nitrogen does not have a complete octet of electrons in its outer shell.

Learn more about octet rule here:

https://brainly.com/question/30779148

#SPJ11

Option (C) NH₄+(aq) and OH-(aq) is correct.

To determine the species present at the greatest concentration when NH₃(g) is bubbled into water, it acts as a weak base and reacts with water to form ammonium hydroxide (NH₄OH(aq)). The equilibrium reaction can be represented as follows:

NH₃(g) + H₂O(l) ⇌ NH₄OH(aq)

In the aqueous solution, NH₄OH dissociates into NH₄+(aq) and OH-(aq). However, NH₄OH is a weak base, and its dissociation is limited. Therefore, the predominant species present in the highest concentration would be NH₄+(aq) and OH-(aq).

Option (C) NH₄+(aq) and OH-(aq) is correct.

Learn more about concentration.

brainly.com/question/3045247

#SPJ11

The formal charge on nitrogen in the nitrite ion (NO2-) is +1.

To determine the formal charge on an atom, we compare the number of valence electrons it should have (based on its position in the periodic table) with the number of electrons assigned to it in the Lewis structure. In the case of the nitrite ion (NO2-), the Lewis structure shows that nitrogen (N) is bonded to two oxygen (O) atoms and has one lone pair of electrons.

Nitrogen has a valence electron configuration of 5. In the nitrite ion, each oxygen contributes 6 electrons (since oxygen has 6 valence electrons) and the overall charge of the ion is -1.

By applying the formula for formal charge, which is the valence electrons minus the non-bonding electrons minus half of the bonding electrons, we can calculate the formal charge on nitrogen.

Formal charge = 5 - 2 - (6/2) = +1

Hence, the formal charge on nitrogen in the nitrite ion is +1.

Learn more about charge

brainly.com/question/14692550

#SPJ11

The pH of the solution being titrated and involved in titration with a strong base will equal the pka of the weak acid at the halfway point of the equivalence volume of titrant being added.

This is because at this point, the concentration of the weak acid and its conjugate base are equal, resulting in the pH being equal to the pKa according to the Henderson-Hasselbalch equation. At this point, half of the weak acid has been converted to its conjugate base and the pH is equal to the pka of the weak acid. However, it is important to note that the exact point at which the pH equals the pKa may vary slightly depending on the specific pka value of the weak acid being titrated.

Learn more about titration : https://brainly.com/question/186765

#SPJ11

The reaction 2Bi + 3Se → Bi2Se3 is classified as a combination reaction.

In chemical reactions, different elements or compounds combine to form a new compound. This type of reaction is known as a combination reaction or synthesis reaction. In the given reaction, bismuth (Bi) and selenium (Se) combine to form bismuth selenide.

Combination reactions involve the union of two or more reactants to produce a single product. In this case, two atoms of bismuth combine with three atoms of selenium to form one molecule of bismuth selenide.

It is important to note that combination reactions generally occur when the elements or compounds have a tendency to form stable compounds. In the case of bismuth and selenium, they have a high affinity for each other and readily react to form the stable compound Bi2Se3. Therefore, the given reaction can be classified as a combination reaction.

Learn more about combination reaction here:

https://brainly.com/question/15192790

#SPJ11

The value of ΔGo for the reaction at 298 K is 129 kJ/mol.

To calculate ΔGo, we use the equation: ΔGo = ΔHo - TΔSo, where ΔHo is the standard enthalpy change, T is the temperature in Kelvin, and ΔSo is the standard entropy change.

First, we need to calculate the standard enthalpy change for the reaction by summing up the standard enthalpies of formation for the products and subtracting the sum of the standard enthalpies of formation for the reactants: ΔHo = [2(-114) + (-398)] - [-524] = 96 kJ/mol

Next, we calculate the standard entropy change for the reaction by summing up the standard entropies of the products and subtracting the sum of the standard entropies of the reactants: ΔSo = [2(196) + 36] - [50 + 2(192)] = -114 J/mol K

Now we can plug in the values to calculate ΔGo: ΔGo = 96 - 298(-114/1000) = 129 kJ/mol

Therefore, the value of ΔGo for the reaction at 298 K is 129 kJ/mol.

To know more about enthalpy, refer here:

https://brainly.com/question/16720480#

#SPJ11

Acid will increase the solubility of salicylic acid in water and base will decrease the solubility of salicylic acid in water.

Salicylic acid, an organic acid, breaks down to lose a proton to the carboxylic acid functional group in an aqueous solution. An intramolecular in hydrogen bond is created when the resultant carboxylate ion () interacts intramolecularly with the hydrogen atom within the hydroxyl group (-OH). Acid will increase the solubility of salicylic acid in water and base will decrease the solubility of salicylic acid in water.

To know more about solubility, here:

https://brainly.com/question/31493083

#SPJ1

The complex ions in order of increasing wavelength of light absorbed are [Co(en)]₃⁺ < [Co(H₂O)₆]₃⁺ < [Co(CN)₆]³⁻ < [Co(ox)₃]³⁻.

The wavelength of light absorbed by a complex ion is related to the energy difference between the ground state and an excited state of the ion. The higher the energy difference, the shorter the wavelength of light absorbed.

Among the given complex ions, [Co(en)]₃⁺ has the smallest energy difference and therefore absorbs light with the longest wavelength. [Co(H₂O)₆]₃⁺ and [Co(CN)₆]³⁻ have intermediate energy differences, so they absorb light with intermediate wavelengths. Finally, [Co(ox)₃]³⁻ has the largest energy difference and therefore absorbs light with the shortest wavelength.

Therefore, the order of increasing wavelength of light absorbed by the complex ions is [Co(en)]₃⁺ < [Co(H₂O)₆]₃⁺ < [Co(CN)₆]³⁻ < [Co(ox)₃]³⁻.


To know more about the Wavelength, here
https://brainly.com/question/30630271
#SPJ4

There are 60.025 grams of H₃PO₄ in 175 ml of a 3.50 M solution of H₃PO₄.

To solve this problem, we can use the formula:
Molarity (M) = moles of solute/liters of solution

First, we need to calculate the moles of H₃PO₄ in the solution:
Molarity = 3.50 M
Volume = 175 ml = 0.175 L

Moles of H₃PO₄ = Molarity x Volume
Moles of H₃PO₄ = 3.50 mol/L x 0.175 L
Moles of H₃PO₄ = 0.6125 moles

Next, we can use the molar mass of H₃PO₄ to convert moles to grams:

Molar mass of H₃PO₄ = 98 g/mol

Grams of H₃PO₄ = moles of H₃PO₄ x molar mass of H₃PO₄
Grams of H₃PO₄ = 0.6125 moles x 98 g/mol
Grams of H₃PO₄ = 60.025 g

Therefore, there are 60.025 grams of H₃PO₄ in 175 ml of a 3.50 M solution of H₃PO₄.

learn more about molarity

https://brainly.com/question/3624366

#SPJ11

The standard enthalpy change for the reaction 2F2(g) + 2H2O(l) ⟶ 4HF(g) + O2(g) is -1154.8 kJ⋅[tex]mol^{-1}[/tex].

To calculate the standard enthalpy change, or ΔH∘rxn, for the given reaction, we can use the Hess's Law of constant heat summation, which states that the enthalpy change for a chemical reaction is independent of the pathway taken between the initial and final states.

This means that we can add or subtract the enthalpies of other reactions to find the enthalpy change of the desired reaction.

We can first use the given reactions to find the enthalpy change for the formation of 2HF(g) from H2(g) and F2(g):

H2(g) + F2(g) ⟶ 2HF(g)                    

ΔH∘rxn = -546.6 kJ⋅mol−1

Next, we can use the given reaction to find the enthalpy change for the formation of H2O from H2(g) and O2(g):

2H2(g) + O2(g) ⟶ 2H2O(l)            

ΔH∘rxn = -571.6 kJ⋅mol−1

To obtain the desired reaction, we need to reverse the second reaction and multiply it by a factor of 2, and also reverse the first reaction:

2H2O(l) ⟶ 2H2(g) + O2(g)                    

ΔH∘rxn = +571.6 kJ⋅mol−1

2HF(g) ⟶ H2(g) + F2(g)                      

ΔH∘rxn = +546.6 kJ⋅mol−1

Now, we can add the two reactions to obtain the desired reaction:

2F2(g) + 2H2O(l) ⟶ 4HF(g) + O2(g)      

ΔH∘rxn = + (546.6 + 2 × 571.6) kJ⋅mol−1      

= -1154.8 kJ⋅mol−1

Therefore, the standard enthalpy change for the reaction 2F2(g) + 2H2O(l) ⟶ 4HF(g) + O2(g) is -1154.8 kJ⋅mol−1. This negative value indicates that the reaction is exothermic and releases heat to the surroundings.

To learn more about standard enthalpy change refer here:
https://brainly.com/question/29556033

#SPJ11

After the finding of molar mass and no. of  moles there are 5.55 × 10²³ oxygen atoms in a 70.0 g sample of scheelite.

The formula of scheelite is CaWO4. The atomic weight of calcium (Ca) is 40.078 g/mol, tungsten (W) is 183.84 g/mol, and oxygen (O) is 15.999 g/mol . To calculate the number of oxygen atoms in a 70.0 g sample of scheelite, you can use the following steps: Step 1: Determine the molar mass of scheelite. Molar mass of CaWO4= (1 × atomic mass of Ca) + (1 × atomic mass of W) + (4 × atomic mass of O)= 40.078 g/mol + 183.84 g/mol + (4 × 15.999 g/mol)= 287.33 g/molStep 2: Calculate the number of moles of scheelite.

Number of moles of CaWO4= Mass of CaWO4 / Molar mass of CaWO4= 70.0 g / 287.33 g/mol= 0.2434 molStep 3: Find the number of oxygen atoms in the sample. Number of oxygen atoms in the sample= (4 × number of moles of CaWO4 × Avogadro's number)= (4 × 0.2434 mol × 6.022 × 10²³ atoms/mol)= 5.55 × 10²³ atoms Hence, there are 5.55 × 10²³ oxygen atoms in a 70.0 g sample of scheelite.

Learn more about atoms  here:

https://brainly.com/question/1566330

#SPJ11

These microscale procedures are crucial in isolating pure isopentyl acetate from the reaction mixture, and they help to remove unwanted impurities and byproducts, ensuring a high-quality product.

To isolate pure isopentyl acetate from the reaction mixture, the following microscale procedures need to be followed:
1. Granular anhydrous sodium sulfate should be added to the aqueous layer to deprotonate unreacted acetic acid, making a water-soluble salt. The lower aqueous layer should be removed using a Pasteur pipette and discarded.
2. This step ensures that the evolution of carbon dioxide gas is complete.
3. The lower aqueous layer should be removed using a Pasteur pipette, and the organic layer should be discarded to remove byproducts.
4. Water should be removed from the product by drying the organic layer over granular anhydrous sodium sulfate. The dry ester should be decanted using a Pasteur pipette to a clean conical vial.
5. The mixture should be stirred, capped, and gently shaken with frequent venting to separate sodium sulfate from the ester. Aqueous sodium bicarbonate should be added to the reaction mixture to facilitate this step.
Overall, these microscale procedures are crucial in isolating pure isopentyl acetate from the reaction mixture, and they help to remove unwanted impurities and byproducts, ensuring a high-quality product.

To know more about anhydrous sodium sulfate visit :

https://brainly.com/question/30430300

#SPJ11

The triglyceride composition of the oil used is an important factor in determining the consistency of the resulting soap is True.

Triglycerides are the main component of oils and fats and are used in soap making to provide the necessary fatty acids that react with lye to form soap. The type and amount of triglycerides used in soap making affect the soap's characteristics, including its consistency. For example, a high percentage of saturated fats, such as coconut oil, can result in a harder and more cleansing soap. On the other hand, a high percentage of unsaturated fats, such as olive oil, can result in a softer and more moisturizing soap.

Here's a concise step-by-step explanation for the long answer:
1. Triglycerides are the primary component of vegetable oils and animal fats used in soap-making.
2. The composition of triglycerides, which consist of glycerol and fatty acids, influences the properties of the resulting soap.
3. Different oils and fats have different fatty acid profiles, which affect the soap's hardness, lather, and moisturizing properties.
4. By controlling the types of oils used, soap-makers can adjust the consistency and properties of their final soap product.

To know more about triglyceride visit:

https://brainly.com/question/5096426

#SPJ11