The water, determine the heat transfer, in KJ/Kg. Kinetic energy and potential energy effects can be ignored is 407.5kJ/kg.
From the properties of the saturated water pressure table;
At 4 bar and Saturated vapor
[tex]u_1 =[/tex] 2553.6 kj/kg
[tex]v_1 =[/tex]0.4625m³/kg
Since tank is rigid, volume remains constant therefore,
[tex]v_2 = v_1 =[/tex] 0.4625m³/kg
From the superhead water table
[tex]v_2 = v_1 =[/tex] 0.4625m³/kg And T_2 = 400°C
[tex]u_2 =[/tex]2961.1kJ/kg
Calculate the heat transfer for rigid tank
[tex]Q= u_2 -u_1[/tex]
= 2961.1 - 2553.6
= 407.5kJ/kg
Temperature is a bodily quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer. Temperature scales want values for definition: the factor chosen as 0 ranges and the magnitudes of the incremental unit of temperature.
Thermometers are calibrated in numerous temperature scales that traditionally have trusted numerous reference points and thermometric materials for definition. The maximum commonplace scales are the Celsius scale with the unit symbol °C (formerly called centigrade), the Fahrenheit scale (°F), and the Kelvin scale (ok), the latter being used predominantly for scientific purposes. The kelvin is one of the seven base units inside the global device of units (SI).
To learn more about Temperature visit here:
brainly.com/question/11464844
#SPJ4
Complete Question:
Water, initially saturated vapor at 4 bar, fills a closed, rigid container. The water is heated until its temperature is 400 degrees celsius. For the water, determine the heat transfer, in KJ/Kg. Kinetic energy and potential energy effects can be ignored.
The heat transmission from the water is measured in KJ/Kg. It is possible to ignore the effects of kinetic energy and potential energy at 407.5kJ/kg.
Temperature is a physical measure that quantifies how hot or cold something feels. A thermometer is used to determine temperature. The factor selected as 0 ranges and the magnitudes of the incremental unit of temperature are needed for the establishment of temperature scales.
Thermometers are calibrated using a variety of temperature scales, which historically relied on a wide range of reference points and thermometric materials to define them. The most widely used scales are the Kelvin scale (ok), which is mostly used in science, the Fahrenheit scale (°F), and the Celsius scale with the unit sign °C (formerly known as centigrade). One of the seven base units in the worldwide device of units is the kelvin (SI).
Based on the pressure table's characteristics for saturated water;
Saturated vapour at 4 bar
[tex]$$\begin{aligned}& u_1=2553.6 \mathrm{kj} / \mathrm{kg} \\& v_1=0.4625 \mathrm{~m}^3 / \mathrm{kg}\end{aligned}$$[/tex]
Tank's rigidity ensures that volume is constant; as a result,
[tex]$$v_2=v_1=0.4625 \mathrm{~m}^3 / \mathrm{kg}$$[/tex]
Super head water table, from
[tex]& v_2=v_1=0.4625 \mathrm{~m}^3 / \mathrm{kg} \\ { T_2 }=400^{\circ} \mathrm{C} \\& u_2=2961.1 \mathrm{~kJ} / \mathrm{kg}[/tex]
Calculate the rigid tank's heat transfer.
[tex]$$\begin{aligned}Q & =u_2-u_1 \\& =2961.1-2553.6 \\& =407.5 \mathrm{~kJ} / \mathrm{kg}\end{aligned}$$[/tex]
For such more question on kinetic energy
https://brainly.com/question/8101588
#SPJ4
Note: The complete question would be as bellow,
Water, initially saturated vapor at 4 bar, fills a closed, rigid container. The water is heated until its temperature is 400 degrees celsius. For the water, determine the heat transfer, in KJ/Kg. Kinetic energy and potential energy effects can be ignored.
A wrench is used to apply a torque to a bolt. Forces F1 through F6 all have the same magnitude. The point of application of force Fi (and F) is a distance d from the center of rotation of the bolt. The application points of Fı, F2, and F3 are all distance d apart, as shown. Use the convention that counter-clockwise torques are positive; clockwise torques are negative.
Part (a) Which of the labeled forces will apply the largest magnitude torque on the bolt? O All forces apply the same torque. O F1 O F4 O F3
O F2 O F5
O F6
On the bolt, F2 force will exert the most torque. Torquing a bolt involves using a wrench. There is no difference in the magnitude of forces F1 through F6.
Vector and scalar quantities both use magnitude as a common denominator. Scalar quantities are understood to be those that have only magnitude, according to their definition. Vector quantities, on the other hand, are those that have both magnitude and direction. Magnitude can be used in a number of different contexts.
where the force is being applied From the bolt's centre of rotation, Fi (and F) are separated by a distance of d. Moment of force equals torque (Rotational domain equivalent of Force)
t1 = (d)(Fcos(theta))=0.86dF
t2 = (2d)(f) = 2dF
t3=(3d)(F)(cos(theta) = 1.5dF
Learn more about force here
https://brainly.com/question/13191643
#SPJ4
A 2000-horsepower electric railroad locomotive gets its power from an overhead wire with 0.25 ohm/km. The potential difference between wire and track is 10 kV. Current returns through the track, whose resistance is negligible. How much current does the locomotive draw? How far from the power plant can the train go before 1% of the energy is lost in the wire?
The locomotive draws a current of 40,000 amps.The train can go 5,000 km before 1% of the energy is lost in the wire.
What is energy ?
Energy is the ability to do work. It can be used to power machines and other devices, generate electricity, or heat and light our homes. Energy is also a measure of how much work can be done in a given time. It is measured in Joules (J).
The current drawn by the locomotive is given by I = V/R.
where V is the potential difference between the wire and track and R is the resistance of the wire (in this case 0.25 ohms/km).
Therefore, the current drawn by the locomotive is
I = 10,000 V/0.25 ohms/km = 40,000 A
The distance from the power plant at which 1% of the energy is lost in the wire is given by d = R*I²/2V
where R is the resistance of the wire, I is the current drawn by the locomotive, and V is the potential difference between the wire and track. Therefore, the distance from the power plant at which 1% of the energy is lost in the wire is
d = 0.25 ohms/km * (40,000 A)²/2 * 10,000 V = 5,000 km
This means that the locomotive can travel up to 5,000 km from the power plant before 1% of the energy is lost in the wire.
To learn about more energy .
brainly.com/question/13881533
#SPJ4
Which of the following is an example of the principle of electromagnetic induction?
A magnet moved through a loop of wire.
Bar magnets in the presence of a magnetic field.
The magnetic field produced by a current carrying wire.
A circuit connected to a high voltage battery.
Through a wire loop, a magnet moved.
What is magnet, exactly?Any substance that can draw iron and create a magnetic field around itself is a magnet. By the end of the 19th century, every known element and a number of compounds had been examined for magnetism and it had been found that they all exhibited some type of magnetic property.
What makes something a magnet?The earliest known users of this mineral are the ancient Greeks, who gave it the nickname "magnet" for its capacity to draw other objects made of the same substance as well as iron.
To know more about magnet visit:
https://brainly.com/question/2841288
#SPJ1
when [s] = 5 km, what percentage (%) of vmax has been reached?
The percentage of the ratio of Vo/ Vmax is 83%
The [s] given has 5 km
The Vmax can be found using the Michaelis-Menten equation,
Vo / Vmax = [s] / km + [s]
where Vo is the initial velocity
Vmax is the maximum velocity
The Michaelis-Menten equation can be rewritten as V = Kcat [enzyme] [S] / (Km + [S]). Kcat is equal to K2 and measures the number of substrate molecules that the enzyme "turns over" per second. The unit of Kcat is 1/sec.
Let us substitute the known values in the above equation, we get
Vo / Vmax = 5 km / km + 5km
= 5 km / 6 km
= 0.833 x 100
= 83.3 %
Therefore, the percentage of Vo/Vmax is 83.3 %
Learn more about the Michaelis-Menten equation in
https://brainly.com/question/20912949
#SPJ4
The full question is
when [s] = 5 km, what percentage (%) of Vo/Vmax has been reached?
Calculate the energy needed to change 10 grams of water from 70°C to 110°C. 5.7 kcal 350 kcal 0.35 kcal 5700 kcal
The energy needed for change 10 grams of water is 5.7.
What is Energy ?Energy is the ability to perform work in physics. It could exist in several different forms, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc.
Energy is always assigned based on its nature once it has been transmitted. Thus, heat transmitted may manifest as thermal energy while work performed may result in mechanical energy.
Motion is a property of all energy types. For instance, if a body is moving, it possesses kinetic energy. Even while at rest, a tensioned object like a spring or bow has the ability to move; this is because of its design, which includes potential energy.
Therefore, The energy needed for change 10 grams of water is 5.7.
To learn more about Energy, refer to the link:
https://brainly.com/question/1932868
#SPJ1
How is the work energy theorem represented as an equation?
Answer:
Trabajo = Δ E
Explanation:
Podemos escribir esta declaración como una ecuación que hace que sea muy fácil ver la relación: Trabajo = Δ E, donde E es energía, y la letra griega Delta significa ‘cambio en’. Entonces leemos esto como: trabajo = cambio de energía. Esto nos ayuda a comprender por qué no se realiza ningún trabajo en una pared que no se mueve.
The work- energy theorem states that the work done by the sum of forces acting on an object is equal to the change in the kinetic energy of the object.
What is work energy theorem ?According to work -energy theorem, the force resulting in a work done which is equal to the change in kinetic energy of the object. When a force applied on a body results in a displacement of the body, it is said to be work done on the body.
Kinetic energy of an object is the energy generated by virtue of its motion. It related to the mass and velocity as written below:
Ke = 1/2 mv²
Let, Vi be the initial velocity and Vf be the final velocity, then the change in kinetic energy is written as:
ΔKe = 1/2 mVf² - 1/2 mVi²
According to wok energy theorem, the work done is equal to the this kinetic energy change.
Hence, W = ΔKe.
Find more on kinetic energy:
https://brainly.com/question/999862
#SPJ2
The weather conditions on Mars today are much different than they were in the distant past.
True or False
ketch a PV diagram and find the work done by the gas during the following stages.
(a) A gas is expanded from a volume of 1.0 L to 3.0 L at a constant pressure of 3.0 atm.
(b) The gas is then cooled at constant volume until the pressure falls to 2.0 atm.
(c) The gas is then compressed at a constant pressure of 2.0 atm from a volume of 3.0 L to 1.0 L. Note: Be careful of signs.
(d) The gas is heated until its pressure increases from 2.0 atm to 3.0 atm at a constant volume.
(e) Find the net work done during the complete cycle.
(a) The work done by the gas during this stage can be calculated using the equation: W = P * (Vf - Vi) = 3.0 atm * (3.0 L - 1.0 L) = 6.0 L-atm.
(b) The work done by the gas during this stage is zero, since the gas is cooling at constant volume.
(c) The work done by the gas during this stage can be calculated using the equation: W = P * (Vf - Vi) = 2.0 atm * (1.0 L - 3.0 L) = -4.0 L-atm. Note the negative sign indicates work is done on the gas.
(d) The work done by the gas during this stage can be calculated using the equation: W = P * (Vf - Vi) = 3.0 atm * (3.0 L - 3.0 L) = 0 L-atm.
(e) The net work done during the complete cycle can be found by adding up the work done during each stage: Wnet = 6.0 L-atm + 0 L-atm + (-4.0 L-atm) + 0 L-atm = 2.0 L-atm.
What is a constant pressure cycle?A constant pressure cycle is a thermodynamic process where the pressure remains constant while the volume and temperature of the gas change. In such a cycle, the work done by the gas is equal to the change in its volume multiplied by the constant pressure. The PV diagram of a constant pressure cycle is a horizontal line at the constant pressure value, because the pressure does not change. The most common example of a constant pressure cycle is the Otto cycle used in internal combustion engines.
Learn more about constant pressure cycle in brainly.com/question/18648419
#SPJ1
A laser produces a ray of blue light of wavelength 4.0 x 10-7m (0.000 00040m).
(a) (i) State the speed of light in a vacuum.
speed =
Answer:d
Explanation: lama lama
The speed of light in a vacuum is approximately 3× 10⁸ meters per second (m/s).
Light is a form of electromagnetic radiation that our eyes can detect. It is a fundamental phenomenon in physics and plays a crucial role in our understanding of the universe. Light consists of tiny packets of energy called photons that travel as waves. It exhibits both wave-like and particle-like properties, known as wave-particle duality.
Speed: In a vacuum, light travels at a constant speed of approximately
299,792,458 meters per second ( 3× 10⁸ m/s).
Wavelength: Light has a property called wavelength, which is the distance between two consecutive peaks (or troughs) of a light wave. Different colors of light have different wavelengths.
Frequency: The frequency of light is the number of wave cycles that pass a point in one second. It is inversely proportional to the wavelength.
Spectrum: The electromagnetic spectrum includes a wide range of electromagnetic waves, with visible light forming only a small part of it. The spectrum includes radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.
Colors: Visible light is the portion of the electromagnetic spectrum that our eyes can perceive. It consists of different colors, each corresponding to a specific range of wavelengths. These colors include red, orange, yellow, green, blue, indigo, and violet.
Reflection and Refraction: Light can bounce off surfaces (reflection) or change direction when passing through different mediums (refraction).
Interference and Diffraction: Light waves can interfere with each other, leading to patterns of constructive and destructive interference. Diffraction is the bending of light waves as they encounter obstacles or pass through narrow openings.
Polarization: Light waves can also be polarized, meaning their oscillations occur in a particular plane. Polarized sunglasses, for example, can block certain orientations of light waves.
Quantum Nature: Light exhibits both wave-like and particle-like behavior. In certain situations, it behaves as discrete packets of energy called photons.
Propagation: Light can travel through a vacuum (empty space) as well as through various materials, though its speed may change depending on the medium.
Light has a profound impact on various fields, including physics, astronomy, biology, and technology. Our understanding of light and its properties has led to the development of lasers, fiber optics, cameras, telescopes, and countless other applications that shape modern society.
To know more about light
https://brainly.com/question/28913766
#SPJ2
What is the dc impedance of the electrode, assuming that it behaves as an ideal capacitor? (a) 0; (b) infinite; (c) √2×104Ω; (d) √2×106Ω.
The dc impedance of the electrode, assuming that it behaves as an ideal capacitor is infinite.
What is an ideal capacitor?
The ideal capacitor has no resistance and, as a result, doesn't lose any energy while in use. Just capacitance exists in it. The dielectric does not degrade in a ideal capacitor.
Using merely its resistance, an element in a DC circuit can be characterized. While an inductor's resistance in a DC circuit is viewed as a short connection (zero resistance), a capacitor's resistance is viewed as an open connection (infinite resistance)
In contrast to an inductor, which has zero impedance at DC and approaches infinity at infinite frequencies, capacitors have infinite impedance at DC and approach zero as frequency approaches infinity.
To learn more about ideal capacitor use link below: https://brainly.com/question/14839711
#SPJ4
The bathroom is 100 meters away, and you can only walk at 2 m/s. How much time will it take you to reach the bathroom?
A: 200 sec
B: 50 sec
C: 100 sec
D: 20 sec
Answer:
50 seconds.
Explanation:
See attached photo.
This question can be solved by simply setting up cross-multiplication and understanding metrics.
Given Information• The bathroom is 100 meters away.
• One can only walk at 2 meters per second.
Set up the Cross-MultiplicationTo cross-multiply fractions, we multiply the numerator of the first fraction with the denominator of the second fraction and the numerator of the second fraction with the denominator of the first fraction.• So essentially we can ask the question like this:
If it takes one second to walk 2 meters, how many seconds will it take to walk 100 meters?The inequality can be set up like this:[tex]\frac{2meters}{100 seconds} = \frac{1 second}{x seconds}[/tex] 2 meters equals 1 second and 100 meters will be equal to x seconds because that's what we want to find. We will use an x to represent the unknown amount of seconds:Multiply the meters and seconds on each side.[tex](2 meters)(x seconds) = (100 meters) (1 second)[/tex]Because the unknown amount of seconds is multiplied by 2 meters on the left-hand side, divide both sides by 2 meters.[tex]\frac{(2 meters)(xseconds)}{(2 meters)} = \frac{(100 meters)(1seconds)}{(2 meters)}[/tex]Once 100 meters are divided by 2 meters, we are left with 50 seconds.Please see the image attached and let me know if this helped!!!
An airplane accelerates from the rest. Down a run way at 3.20 m/s2 for 32.8s until it finally lifted off the ground . Determine the distance traveled before takeoff
The plane's acceleration is 3.22 m/s2, and the travel duration is 3.28 seconds. The distance traveled before takeoff is 1720m.
How is the distance travelled prior to takeoff calculated?The kinematic equation gives us the distance travelled before to takeoff: d=v 0 t+1/2 at2, where d is the distance prior to takeoff, v 0=0 is the airplane's starting velocity, an is its acceleration, and t is the time.
A plane travels down a runway at 3. 20 m/s2 for 32. 8 seconds before ultimately taking off.
U=0 m/s is the airplane's initial speed.
The plane's acceleration is 3.22 m/s2, and the travel duration is 3.28 seconds.
Distance travelled using a formula S=ut+ 2 1 2
⇒ S=0(32.8)+0.5(3.2)(32.8) 2 =1721.3∼ 1720m
The distance traveled before takeoff is 1720m
To learn more about distance refer to:
https://brainly.com/question/26046491
#SPJ1
To perform this maneuver, the dancer relies on the fact that the position of her center of gravity
A. Is near the center of the torso.
B. Is determined by the positions of her arms and legs.
C. Moves in a horizontal path.
D. Is outside of her body.
option (B) is correct answer.
What is acceleration due to gravity ?
Gravitational acceleration is the acceleration experienced by an object due to gravity. Its SI unit is m/s2. It is vector magnitude because it has both magnitude and direction. The standard value of g on the surface of the earth at 0m above sea level is 9.8m/s2. Suppose an object [test mass (m)] is moved from a height "h" above the ground [source mass (M)], and as it approaches the ground it begins to move downwards, increasing its velocity. We know that the velocity of an object changes only under the action of a force. In this case the force is provided by gravity.
Under the action of gravity, the object begins to accelerate towards the center of the earth. The center of the Earth is at a distance "r" from the test mass. Then ma = GMm/r2 (applies the equivalence principle)
⇒ a = GM/r2 . . . . . . (1)
The above acceleration is due to the earth's gravitational pull, so we call it the gravitational acceleration and it does not depend on the test mass. The value near the ground is 9.8 ms-2. Therefore the acceleration due to gravity (g) is given by = GM/r2.
The dancer relies the position of center center of gravity is determined by the Positions of her arms and legs.
Hence option (B) is correct answer.
To learn more about acceleration due to gravity ,click the given link;
brainly.com/question/25749514
#SPJ4
In the equation ω=ω0+αt, what does the time variable t represent? Choose the answer that is always true. Several of the statements may be true in a particular problem, but only one is always true. the moment in time at which the angular velocity equals ω0 the moment in time at which the angular velocity equals ω the time elapsed from when the angular velocity equals ω0 until the angular velocity equals ω
In the equation ω=ω0+αt, the time elapsed from when the angular velocity equals ω0 until the angular velocity equals ω.
Option C is correct.
What is angular velocity?Angular velocity is a vector quantity, expressed as the angular velocity or rotational speed of an object and the rate of change of angular displacement that specifies the axis about which the object rotates.
Why is angular velocity a vector?Angular velocity is a vector quantity and has both magnitude and direction. This direction is the same as the direction of angular displacement that defined the angular velocity.
What is angular velocity, give an example?For example, a roulette ball on a roulette wheel, a racing car on a circular track, and a Ferris wheel are examples of angular velocity. Furthermore, the angular velocity of an object is the angular displacement of the object in time.
Question is incomplete . Missing options are:
In the equation ω=ω0+αt, what does the time variable t represent? Choose the answer that is always true. Several of the statements may be true in a particular problem, but only one is always true.
A. the moment in time at which the angular velocity equals ω0
B. the moment in time at which the angular velocity equals ω
C. the time elapsed from when the angular velocity equals ω0 until the angular velocity equals ω
Learn more about angular velocity:
brainly.com/question/20432894
#SPJ4
1. An object is moving with an acceleration of 2 m/s². What will the acceleration be if
the force applied to the object is tripled? Explain.
Show work
Answer:
Vegas for a week or two and I deserve it to me right next to me right next to me.
Explanation:
no exceptions
suppose there is an astronaut who is traveling at a significant fraction of the speed of light d=4.25 , v=0.80277c
All of your clocks tick at the same rate, and your brain experiences the same effects of time that your clock does.
It is difficult to see your own clocks slowed since a clock that is not slowed down must be used to measure it.
As a result, an astronaut sees the clock and the passage of time as usual. The time on Earth appears to go more slowly in the astronaut's perspective than it does on Earth. The ship appears to be in good condition (it doesn't move in relation to the astronaut), but everything else—including the distance system to stars in the direction of travel—seems to have been compressed. In just 5 years, an astronaut can travel to a star located 10 light years away using the following method: the star is closer to Earth in the astronauts' perspective.
The complete question is- Suppose an astronaut is moving relative to the Earth at a significant fraction of the speed of light. a. Does she observe the rate of her clocks to have slowed?
Learn more about system here-
https://brainly.com/question/11938296
#SPJ4
Optics question (Grade 10 Science)
The index of refraction of the gem is 1.54.
What is index of refraction?The index of refraction quantifies how a light beam deflects as it passes through various materials.
By dividing the speed of light at a specific wavelength in vacuum space by the speed of light in that medium, the refractive index is determined.
The speed of light in gem is = 1.95 × 10⁸ m/s
The speed of light in vacuum = 3 × 10⁸ m/s.
The index of refraction of that gem = (speed of light in vacuum/speed of light in that medium)
= (3 × 10⁸ m/s)/(1.95 × 10⁸ m/s)
= 1.54.
Learn more about index of refraction here:
https://brainly.com/question/23750645
#SPJ1
What is the direction of the magnetic force that this solenoid exerts on the bar magnet?
O Upward
O Downard
O To the right away from the solenoid
O To the left, toward the solenoid.
Correct option is D, the direction of the magnetic force that this solenoid exerts on the bar magnet To the left, toward the solenoid.
We are aware that like poles repel one another and that opposing poles attract one another. Therefore, the bar magnet will be drawn to the solenoid. Therefore, the solenoid's left side must be receiving the force.
We are aware that like poles repel one another and that opposing poles attract one another. Therefore, the bar magnet will be drawn to the solenoid. Therefore, the solenoid's left side must be receiving the force.
What does magnetic force mean?One of the four fundamental forces of nature, the electromagnetic force, results in the magnetic force, which is brought about by the motion of charges. When two charge-containing objects move in the same direction, a magnetic attraction pulls them together. A compass, a motor, the magnets that hold items in refrigerators, railroad tracks, and modern roller coasters are examples of devices that use magnetic force. A magnetic field is created by all moving charges, and the charges that move across its areas,
To learn more about Magnetic force from given link
https://brainly.com/question/25932320
#SPJ4
A magazine rack has a center of gravity 16 cm above the floor, as shown in the figure below (Figure 1). Through what maximum angle, in degrees, can the rack be tilted without falling over?
The rack can be tilted to a maximum of 8.880 before falling over.
What is acceleration due to gravity ?
Gravitational acceleration is the acceleration experienced by an object due to gravity. Its SI unit is m/s2. It is vector magnitude because it has both magnitude and direction. The standard value of g on the surface of the earth at 0m above sea level is 9.8m/s2. Suppose an object [test mass (m)] is moved from a height "h" above the ground [source mass (M)], and as it approaches the ground it begins to move downwards, increasing its velocity. We know that the velocity of an object changes only under the action of a force. In this case the force is provided by gravity.
Under the action of gravity, the object begins to accelerate towards the center of the earth. The center of the Earth is at a distance "r" from the test mass. Then ma = GMm/r2 (applies the equivalence principle)
⇒ a = GM/r2 . . . . . . (1)
The above acceleration is due to the earth's gravitational pull, so we call it the gravitational acceleration and it does not depend on the test mass. The value near the ground is 9.8 ms-2. Therefore the acceleration due to gravity (g) is given by = GM/r2.
To learn more about acceleration due to gravity ,click the given link;
brainly.com/question/25749514
#SPJ4
A traveler pulls a suitcase
95.2 m with a 17.9 N force
directed at a 61.3° angle.
How much work does she do?
(Unit = J)
She does 818J work, which is the transfer of energy to or from an item by the application of force along a displacement.
What does "work" imply in the context of physics?Work is the energy that is transferred when a force acts on an item and moves it. The sum of the force's magnitude, the displacement's magnitude, and the angle's cosine determines the work that a force produces on an item.
What does "labor" mean in its simplest form?Work is force transferred across a distance. Examples of labor include pushing a car up a hill, drawing a captive helium balloon down, and raising an object against the gravitational attraction of the Earth. The mechanical expression of energy is work. The
To know more about work visit:
https://brainly.com/question/18094932
#SPJ1
If a negatively charged rod is held near an uncharged metal ball, the metal ball: 1. becomes positively charged. 2. becomes polar. 3. Effect cannot be determined. 4. becomes negatively charged. 5. is unaffected.
Becomes positively charged: If a negatively charged rod is held near an uncharged metal ball, the metal ball
What is metal ball ?
A metal ball is a spherical object made of metal, typically used in engineering and construction. Metal balls are often used as components in mechanical systems such as bearings, valves, and locks, as well as in arts and crafts.
They can also have decorative purposes, such as in furniture or jewelry. Metal balls are available in a variety of metal alloys and sizes, and can be machined, stamped, cast, or formed into shapes. Metal balls are often used to reduce friction in machines, as well as to transfer energy from one part of a system to another.
To learn about metal ball .
brainly.com/question/28544002
#SPJ4
How can a simple fixed pulley make a job easier? (1 point)
O by decreasing the distance that the force needs to be applied
by changing the direction at which the force needs to be applied
O by decreasing the work done
O by decreasing the force required to lift the object
Answer:
A fixed pulley changes the direction of the force you exert by pulling, so you can pull down to move an object up.
Explanation:
By decreasing the work done. A simple fixed pulley reduces the amount of work needed to lift an object by changing the direction of the force applied, so the same force can be used to lift the object with less effort.
What is force?Force is the action of one object upon another. It is a vector quantity, meaning it has both a magnitude and a direction. Forces can cause an object to accelerate, decelerate, or remain in a constant velocity. Examples of forces include gravity, friction, tension, and electric and magnetic forces. The study of forces and their effects is known as mechanics. Forces can act in pairs, such as the forces between two interacting objects, or individually, such as the force of gravity acting on an object. In physics, the force is measured in Newtons (N), and the magnitude of a force is measured in joules (J). Forces can cause changes in the shape or motion of objects.
To learn more about force
https://brainly.com/question/12970081
#SPJ1
How is using the stairs similar and different from using a ramp to get into a building
The difference between steps and stairs can be seen in how they are comparable to and different from using a ramp to enter a building. In contrast to a stair, which has two or more risers, a step is the portion of a movement that elevates or descends by simply one riser.
How are utilizing stairs and using a ramp alike and different?Stairs can be built anywhere there is a height difference between landings, and they only occupy a small amount of space. However, ramps require significantly more space to allow for the proper climb.
It is more efficient to climb steps than than a ramp since it requires less energy. Ramps that are as steep as a standard flight of stairs are also challenging to climb. Because it requires more distance (and walking time) to reach the same height as steep stairs, very shallow slopes require overall more energy.
To know more about ramp and stairs, refer
https://brainly.com/question/8678172
#SPJ1
If the length and diameter of a wire of circular cross section are both doubled, the resistance is
A.) increased fourfold.
B.) doubled.
C.) unchanged.
D.) halved.
E.) None of these are true.
R = I/A, Resistance is inversely proportional to the circular cross section and directly proportional to the length of a wire. Therefore, the resistance is unaltered. The correct choice is c.
Additionally, the Greek uppercase letter omega is used to denote the resistance unit, which is the ohm. Additionally, the voltage applied across a specific resistor and the current passing through it affect the resistance. Resistance is a unit of measurement for the resistance to current flow in a certain electrical circuit. The area of a 3D object's sliced cross section, like a pipe, is known as the cross sectional area. The cross sectional area for the top portion of the sliced component will be determined when a pipe is cut perpendicular to its longest axis.
Learn more about resistance here
https://brainly.com/question/29427458
#SPJ4
How much charge must pass by a point in a wire in 10 s for the current inb the wire to be 0.50 A?
A) 5.0 C
B) 2.0 C
C) 0.050 C
D) 20 C
A) 5.0 C charge must pass by a point in a wire in 10 s for the current in the wire of 0.50 A current.
Current is the flow of electric charge per unit time. It is measured in amperes (A). The formula for current is:
I = Q / t
Where I is the current, Q is the charge, and t is the time.
In this case, the current is given as 0.50 A, and the time is given as 10 s. To find the charge that must pass by a point in a wire, we can rearrange the formula:
Q = I * t
Therefore, Q = 0.50 A * 10 s = 5.0 C
So, the charge that must pass by a point in a wire in 10 seconds for the current in the wire to be 0.50 A is 5.0 C.
To know more about current click below:
https://brainly.com/question/10254698#
#SPJ4
The element shown in Figure P1.24 I has v (t) = 10 V and i (t) = 2e A. Compute the power for the circuit
element. Find the energy transferred between t= 0 and 1= [infinity] Is this energy absorbed by the elementor
supplied by it
This question focuses on the element shown in Figure P1.24 I, with a voltage of 10 V and current of 2e A.
The goal is to calculate the power of the circuit element and the total energy transferred between t= 0 and t= [infinity]. To determine if this energy is absorbed or supplied by the element, calculations must be done. First, the power of the circuit element can be calculated by multiplying the voltage and current together.
This yields a power of 20e W. Next, the energy transferred between t= 0 and t= [infinity] can be found by integrating the power over that time interval. This yields an energy of 20e Joules. Finally, to determine if the energy is absorbed or supplied by the element, the sign of the power must be checked. In this case, the power is positive, so the element is supplying the energy.
a 40.0 kg block of lead is heated from -25°c to 200.°c. how much heat is absorbed by the lead block? the specific heat value of lead is 130 j/kgoc.
To melt 2 kg of ice 835.48 KJ of heat is required.
Total heat = Heat required to convert 2 kg of ice to 2 kg of water at 0 °C + Heat required to convert 2 kg of water at 0 °C to 2 kg of water at 20 °C.
Heat=mhfg+mCpΔT
Here, m ( mass of ice) = 2 kg
hfg (latent heat of fusion of ice) = 334 KJ
Cp of water (specific heat) = 4.187 KJ/Kg-K
ΔT(Temperature difference) = 20 °C
Therefore, Heat required = 2 x 334 + 2 x 4.187 x (20 - 0 )
Heat reqd= 835.48 KJ
Therefore, to melt 2 kg of ice 835.48 KJ of heat is required
What is heat?
Heat is defined as a form of energy crossing the boundary of a thermodynamic system due to a temperature difference across that boundary.A thermodynamic system does not contain heat. However, the term is also often used to refer to the thermal energy contained in a system as part of its internal energy, which is reflected in the temperature of the system.To know more about heat, click the link given below:
https://brainly.com/question/13860901
#SPJ1
A valid scientific hypothesis
A. is proven wrong
B. is proven right
C. can be proven right or wrong right
D. makes common sense
E. is not intuitive
C. can be proven right or wrong
A scientific hypothesis is a proposed explanation for an observation or phenomenon. A valid scientific hypothesis must be testable and falsifiable, meaning that it can be proven right or wrong through the collection and analysis of data. A scientific hypothesis that cannot be tested or disproven is not considered a valid scientific hypothesis. Additionally, a scientific hypothesis should not be based on common sense or intuition alone, as these can be misleading and not always accurate. Rather, it should be supported by evidence and logical reasoning.
Let me know if this helps! :)
As researchers cool a substance close to absolute zero, what happens?
-The work needed to cool it further falls to zero.
-The work needed to cool it further decreases, becoming easier.
-The work needed to cool it further increases.
-Work is done on the environment by the substance.
Answer:
Nothing can be cooled to a temperature of exactly absolute zero. The temperature of an object is a measure of the average random motion energy (kinetic energy) of its atoms. Absolute zero is the temperature at which all of an object's atoms have been brought to a dead stop relative to each other.
Explanation:
When applied to cooling, the question becomes how much work must be done and how large must the cooling reservoir be in order to cool an object to absolute zero (0 Kelvin, -273.15°C, or -459.67°F)? The physicists showed that cooling a system to absolute zero requires either an infinite amount of work or an infinite reservoir.
1. To prepare the body for the vigorous workout. 2. To allow the body to settle down and unwind. What does a well-designed kettlebell workout consist of? 1. Preparation phase: Warm up 2. Main phase: Workout 3. Final phase: Cool down What does the main phase of a workout involve?
A person’s environment can include many settings, including home, work, school, neighborhoods, recreation areas, and social events. If your environment is one in which drugs or alcohol are available and widely accepted, it can have a strong effect on your potential for abuse and addiction. Environmental factors can strongly influence addiction.
A fast-food hamburger (with cheese and bacon) contains 1000 Calories.
Part A
What is the burger's energy in joules? Please convert answer to kj in two significant figures.
Part B
If all this energy is used to lift a 20 {\rm kg} mass, how high can it be lifted?
Please express your answer in two significant figures in km
So, we compiled a list of every fast-food burger with more than 1,000 calories. Consider this: the majority of individuals eat 2,000 calories on average each day.
It is therefore quite simple to exceed that calorie restriction if one component of one meal has more calories than a day's worth. Because of this, we've compiled a list of the worst fast-food burgers with surprisingly high calorie counts, from the worst to the worst offenders. The lack of McDonald's burgers on this list may actually come as a surprise to you. Unexpectedly, every burger at Mickey D's has fewer than 1,000 calories. The Double Quarter-Pounder with Cheese, which has 740 calories, is the main offender.
Learn more about average here-
https://brainly.com/question/12322912
#SPJ4