What is the earliest time at which the oscillator shown below is stationary?

What Is The Earliest Time At Which The Oscillator Shown Below Is Stationary?

Answers

Answer 1

Answer:

0.0s

Explanation:

I got it right in acellus

Answer 2

Answer: 0.0

Explanation:


Related Questions

Consider a large truck carrying a heavy load, such as steel beams. A significant hazard for the driver is that the load may slide forward, crushing the cab, if the truck stops suddenly in an accident or even in braking. Assume, for example, that a 10 000-kg load sits on the flatbed of a 20 000-kg truck moving at 12.0 m/s. Assume that the load is not tied down to the truck, but has a coefficient of friction of 0.500 with the flatbed of the truck.
A) Calculate the minimum stopping distance for which the load will not slide forward relative to the truck.
B) Is any piece of data unnecessary for the solution?
a) mass of the load.
b) mass of the truck.
c) velocity.
d) coefficient of static friction.
e) all are necessary.

Answers

Answer:

A)

the minimum stopping distance for which the load will not slide forward relative to the truck is 14 m

B)

data that were not necessary to the solution are;

a) mass of truck and b) mass of load

Explanation:

Given that;

mass of load [tex]m_{LS}[/tex] = 10000 kg

mass of flat bed [tex]m_{FB}[/tex] = 20000 kg

initial speed of truck [tex]v_{0}[/tex] = 12 m/s

coefficient of friction between the load sits and flat bed μs = 0.5

A) the minimum stopping distance for which the load will not slide forward relative to the truck.

Now, using the expression

Fs,max = μs [tex]F_{N}[/tex]     -------------let this be equation 1

where [tex]F_{N}[/tex] = normal force = mg

so

Fs,max = μs mg

ma[tex]_{max}[/tex] = μs mg

divide through by mass

a[tex]_{max}[/tex] = μs g    ---------- let this be equation 2

in equation 2, we substitute in our values

a[tex]_{max}[/tex] = 0.5 × 9.8 m/s²

a[tex]_{max}[/tex] = 4.9 m/s²

now, from the third equation of motion

v² = u² + 2as

[tex]v_{f}[/tex]² = [tex]v_{0}[/tex]² + 2aΔx

where [tex]v_{f}[/tex] is final velocity ( 0 m/s )

a is acceleration( - 4.9 m/s² )

so we substitute

(0)² = (12 m/s)² + 2(- 4.9 m/s² )Δx

0 = 144 m²/s² - 9.8 m/s²Δx

9.8 m/s²Δx = 144 m²/s²

Δx = 144 m²/s² /  9.8 m/s²

Δx = 14 m

Therefore, the minimum stopping distance for which the load will not slide forward relative to the truck is 14 m

B) data that were not necessary to the solution are;

a) mass of truck and b) mass of load

As a sports car travels along a level stretch of road with constant speed, most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the sports car by the air and the road. If the power developed by the engine is 0.824 hp, calculate the total friction force acting on the sports car (in N) when it is moving at a speed of 30 m/s. One horsepower equals 746 W.

Answers

Answer:

20.49 N

Explanation:

From the question given above, the following data were obtained:

Power (P) = 0.824 hp

Velocity (v) = 30 m/s

1 h = 746 W

Force (F) =?

Next, we shall convert 0.824 hp to Watts (W). This can be obtained as follow:

1 h = 746 W

Therefore,

0.824 hp = 0.824 hp × 746 W / 1 h

0.824 hp = 614.704 W

Finally, we shall determine the force as follow:

Power (P) = 614.704 W

Velocity (v) = 30 m/s

Force (F) =?

P = F × v

614.704 = F × 30

Divide both side by 30

F = 614.704 / 30

F = 20.49 N

Can someone plz explain :
Two cars have the same mass, the first car is moving towards the east and the second is
stationary. If the two cars merge together after a collision and head towards the east their speed
after the collision is equal to.......
A)1/4vi b)1/2vi c)vi d) 2vi

Answers

Answer: Option b, the final velocity is half of the initial velocity.

Explanation:

Here we will use the conservation of the total momentum of a system.

This means that the total momentum at the beginning must be the same as the final momentum.

Where momentum is:

P = M*v

Initially, we have two cars, both with the same mass M, and only one of them has a velocity v.

Then the initial momentum is:

P = M*v + M*0 = M*v

After the collision, the two cars move together. Then the total mass that is moving is equal to the sum of the masses of the cars, this is 2*M

and we can suppose that the two cars move at a final velocity v'

Then the final momentum is:

P' = (2*M)*v'

Now we use the conservation of momentum, then:

P = P'

M*v = (2*M)*v'

Now we need to solve this for v'

(M*v)/(2*M) = v'

v/2 = v'

This means that the final velocity is half of the initial velocity.

Then the correct option is option b.

A 1000 kg truck moving at 2.0 m/s runs into a concrete wall. It takes 0.5 s for the truck to completely stop. What is the magnitude of force exerted on the truck during the collision?​

Answers

Answer:

Momentum is given by

p

=

m

v

. Impulse is the change of momentum,

I

=

Δ

p

and is also equal to force times time:

I

=

F

t

. Rearranging,

F

=

I

t

=

Δ

p

t

=

0

20

,

000

5

=

4000

N

.

Explanation:

Momentum before the collision is

p

=

m

v

=

2000

10

=

20

,

000

k

g

m

s

1

.

Assuming the truck comes to a complete halt, the momentum after the collision is

0

k

g

m

s

1

.

The change in momentum,

Δ

p

, is initial minus final

0

20

,

000

=

20

,

000

This is called the impulse:

I

=

Δ

p

. Impulse is also equal (check the units) to force times time:

I

=

F

t

.

We can rearrange this expression to make

F

the subject:

F

=

I

t

=

Δ

p

t

=

20

,

000

5

=

4000

N

The negative sign just means the force acting is in the opposite direction to the initial momentum.

(This will be the average force acting during the collision: collisions are chaotic so the force is unlikely to be constant.)

A 50 kg mass is sitting on a frictionless surface. An unknown constant force called force A pushes the mass for 2 seconds until the mass reaches a velocity of 3 m/s. If the 50 kg mass is now pushed by an unknown force B and reaches the velocity of 3 m/s in 4 seconds, compare the impulse delivered to the mass when acted upon by force A with the impulse delivered to the mass when acted on by force B? *

A) The impulse delivered to the mass when acted upon by force A is greater
B) The impulse delivered to the mass when acted upon by force B is greater
C) The impulse is the same in each case
D) We need to know the value of force A and force B in order to determine this

Answers

Answer:

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Question 1 of 10
Which object has the most gravitational potential energy?

A. A 8 kg book at a height of 2 m
B. An 8 kg book at a height of 3 m
C. An 5 kg book at a height of 3 m
D. A5 kg book at a height of 2 m
SUBMIT

Answers

Answer:

B = An 8 kg book at a height of 3 m

I think the answer is B

What happens when a moving object is moving a particular direction experiences a net force opposite the direction?

Answers

Answer:

stop

Explanation:

object stop

Answer:

If two forces of equal strength act on an object in opposite directions, the forces will cancel, resulting in a net force of zero and no movement. Two or more opposite forces are balanced forces if their effects cancel each other and they do not cause a change in an object's motion.

a rugby player passes the ball 5.34 m across the field, where it is caught at the same height as it left his hand. at what angle was the ball thrown if its initial speed was 7.7 m/s, assuming that the smaller of the two possible angles was used

Answers

Answer:

[tex]31.035^{\circ}[/tex]

Explanation:

x = Displacement in x direction = 5.34 m

t = Time taken to travel the displacement

y = Displacement in y direction = 0

u = Initial velocity of ball = 7.7 m/s

g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]

Displacement in x direction is given by

[tex]x=u\cos\theta t\\\Rightarrow t=\dfrac{5.34}{7.7 \cos\theta}[/tex]

Displacement in y direction is given by

[tex]y=u\sin\theta t-\dfrac{1}{2}gt^2\\\Rightarrow 0=7.7\sin\theta \dfrac{5.34}{7.7\cos\theta}-\dfrac{1}{2}\times 9.81 (\dfrac{5.34}{7.7\cos\theta})^2\\\Rightarrow 0=7.7\sin\theta-4.905\times \dfrac{5.34}{7.7\cos\theta}\\\Rightarrow 0=7.7^2\sin\theta \cos\theta-4.905\times 5.34\\\Rightarrow 0=7.7^2\dfrac{\sin2\theta}{2}-4.905\times 5.34\\\Rightarrow 0=7.7^2\sin2\theta-4.905\times5.34\times 2\\\Rightarrow \sin2\theta=\dfrac{4.905\times 5.34\times 2}{7.7^2}\\\Rightarrow 2\theta=\sin^{-1}\dfrac{4.905\times 5.34\times 2}{7.7^2}[/tex]

[tex]\Rightarrow \theta=\dfrac{62.07}{2}\\\Rightarrow \theta=31.035^{\circ}[/tex]

The angle at which the ball was thrown is [tex]31.035^{\circ}[/tex].

An enormous thunderstorm covers Dallas-Ft. Worth. Your best friend Clark is a storm chaser and heads to the center of the storm to take some readings while you stay dry at home. While Clark is at the center of the storm, he sees and hears lightning strike a tree that is 190 m from where he is standing. You are 140 km from the tree. How long does it take for the sound to reach Clark

Answers

Answer:

407.61 seconds

Explanation:

Given that an enormous thunderstorm covers Dallas-Ft. Worth. Your best friend Clark is a storm chaser and heads to the center of the storm to take some readings while you stay dry at home. While Clark is at the center of the storm, he sees and hears lightning strike a tree that is 190 m from where he is standing. You are 140 km from the tree. How long does it take for the sound to reach Clark

Solution.

The distance between the Clark and you will be:

Distance = 140km - 190m

Distance = 140000 - 190

Distance = 139810 m

The radius of the earth is also considered but it will surely be insignificant as you subtracted the two distance values.

Using the formula

Speed = distance/time

Where

The speed of sound = 343 m/s

343 = 139810 / t

Make time the subject of formula

t = 139810 / 343

t = 407.61 s

Therefore, it will take 407.61 seconds for the sound to reach Clark

cosmic Microwave Background radiation is one piece of supporting evidence for the Big Band Theory. Are these microwaves at the longer or shorter end of the spectrum?


are they long or short?

Answers

Answer:

it is long.

Explanation:

I know the answer but I don't know how to explain it

A 10 kg object moving to the left collides with and sticks to a 3 kg object moving to the right. Which of the following is true of the motion of the combined objects immediately after the collision?

Answers

Answer:

"Cannot be determined," if that's an answer choice. It depends on the velocities of both objects, since momentum=mass*velocity.

Explanation:

Why might video games increase creativity while the use of cell phones, the internet, or computers do not?

Answers

Explanation:

Video games are developed around a structure that is unique from your usual media, where there is a sense purpose in mind when playing a game, as decided by the player, and it allows them to explore creative options in order to solve scenarios, depending on the genre. In the use of phones, internet, or computers, this structure is more rare and diverse from video games, which does not lean more toward a creative purpose to build from. That idea gives people the inspiration and discover skills they never knew they even had.

Neuroticism, psychoticism, and extraversion are the three dominant personality traits according to
A. Paul Costa
B. Hans Eysenck
C. Gordon Allport
D. Robert McCrae

Answers

The answer is b I just took the test

Neuroticism, psychoticism, and extraversion are the three dominant personality traits according to Hans Eysenck.

What is Hans Eysenck's theory?

Eysenck's theory of personality is based on three logical attributes namely:  

a) Introversion vs. extroversion Extroversion leads to sociable life , while introversion causes need of being alone and limited interactions

b) Neuroticism vs. stability – Neuroticism leads to anxiousness and an overactive sympathetic nervous system while stability leads to emotional stability.

c) Nsychoticism vs. socialization. - psychoticism  leads to independent thinking, and hostility. While socialization leads to co-operative and conventional behaviour.  

Therefore Neuroticism, psychoticism, and extraversion are the three dominant personality traits according to Hans Eysenck.

To know more about Hans Eysenck's theory follow

https://brainly.com/question/11912668

#SPJ2

What is the name of the theory describing how the lithosphere is broken into segments, or plates, which "float" on the asthenosphere, and associates the interactions between these plates with earthquakes and volcanic activity and the formation of mid-ocean ridges, trenches, mountains, and chains of volcanic islands?

A. Conservation of Matter
B. Big Bang Theory
C. Plate Tectonics
D. Theory of Evolution

Answers

Answer:

C. Plate Tectonics

Explanation:

The theory of plate tectonics is when the lithosphere is separated into plates. These plates move over or float over the asthenosphere. The movement of these plates cause earthquakes and can interact with the volcanic activity.

To determine the coefficient of static friction between two materials, an engineer places a small sample of one material on a horizontal disk whose surface is made of the other material and then rotates the disk from rest with a constant angular acceleration of 0.4 rad/s2. If she determines that the small sample slips on the disk after 9.903 s, what is the coefficient of friction

Answers

This question is incomplete, the missing image is uploaded along this answer.

Answer:

the coefficient of friction is 0.32

Explanation:

 Given the data in the question;

we make use of kinematic equation of motion;

ω = ω₀ + ∝t

we substitute

ω = ( 0 rad/s ) + ( 0.4 rad/s² )( 9.903 s )

ω = 3.9612 rad/s

The centripetal force acting on the sample is;

Fc = mrω²

from the image; r = 200 mm = 0.2 m

so we substitute

Fc = m(0.2 m ) ( 3.9612 rad/s )²

Fc = (3.13822 m/s²)m

we know that the frictional force between the two materials should be providing the necessary centripetal force to rotate the sample object;

f = Fc

μN = Fc

μmg = (3.13822 m/s²)m

μ = (3.13822 m/s²)m / mg

μ = (3.13822 m/s²) / g

acceleration due to gravity g = 9.8 m/s²

so

μ = (3.13822 m/s²) / 9.8 m/s²

μ = 0.32

Therefore, the coefficient of friction is 0.32

What might Earth be like if it had never been hit by the theoretical protoplanet Orpheus?

Answers

Answer:

If Earth hadn't been hit by Orpheus, it would be covered by ocean, with perhaps a few mountaintops emerging through the water. There would be no humans, but there could be other forms of life. Earth would rotate rapidly, as the moon would not be present to produce the tidal friction that slows Earth's rotation today

An open pipe is 1.42 m long
What fundamental frequency
does it produce?
(Speed of sound = 343 m/s)
(Unit = Hz)

Answers

Answer:

the fundamental frequency produced by the open pipe is 120.78 Hz

Explanation:

Given;

length of the open pipe, L = 1.42 m

speed of sound in air, v = 343 m/s

The length of the open pipe for the fundamental frequency is equivalent to half of wavelength;

[tex]L = \frac{\lambda}{2} \\\\\lambda = 2L[/tex]

The fundamental frequency produced by the open pipe is calculated as;

[tex]f_o = \frac{v}{\lambda} \\\\f_o = \frac{v}{2L} \\\\f_o = \frac{343}{2 \times 1.42} \\\\f_o = 120.78 \ Hz[/tex]

Therefore, the fundamental frequency produced by the open pipe is 120.78 Hz

How does the amplitude of the wave change as you get farther from the speaker?

Answers

Answer:

The amplitude decreases

Explanation:

From the inverse square law, we know that;

I ∝ 1/d²

Where;

I is intensity

d is distance

Also, we know that;

A² ∝ I

Where A is amplitude

Thus, we can say that;

A ∝ 1/d²

Thus, amplitude is inversely proportional to the distance.

So the larger the distance, the lesser the amplitude and the lesser the distance, the higher the amplitude.

Thus, as you move farther from the speaker the distance increases and therefore the amplitude decreases

The half-life of radium-226 is 1590 years. (a) A sample of radium-226 has a mass of 100 mg. Find a formula for the mass of the sample that remains after t years. (b) Find the mass after 1000 years correct to the nearest milligram. (c) When will the mass be reduced to 40 mg? SOLUTION (a) Let m(t) be the mass of radium-226 (in milligrams) that remains after t years. Then dm/dt = km and m(0) = 100, so this theorem gives m(t) = m(0)ekt = ekt. In order to determine the value of k, we use the fact that m(1590) = 1 2 . Thus e1590k = so e1590k = and 1590k = ln 1 2 = − ln(2) k = . Therefore m(t) = . We could use the fact that eln(2) = 2 to write the expression for m(t) in the alternative form m(t) = . (b) The mass after 1000 years is as follows. (Round your final answer to the nearest milligram.) m(1000) = ≈ mg

Answers

Answer:

See explanation

Explanation:

a) Formula for the mass of the sample that remains after t years = N= Noe^-kt

Where;

N = mass at time t years

No = mass at time t= 0

k = decay constant

t = time taken

So,

N = 100e^-kt

b) First,

t1/2 = -ln(1/2)/k

t1/2 = 0.693/k

t1/2 = half life of radium-226 =1590 years

1590 = 0.693/k

k = 0.693/1590

k = 4.36 * 10^-4

So,

N= 100e^-(4.36 * 10^-4 * 1000)

N= 65 mg

c) From

N = 100e^-kt

40 = 100e^-(4.36 * 10^-4t)

40/100 = e^-(4.36 * 10^-4t)

0.4 = e^-(4.36 * 10^-4t)

ln(0.4) = ln(e^-(4.36 * 10^-4t))

-0.9163 = -4.36 * 10^-4t

t = 0.9163/4.36 * 10^-4

t = 2102 years

(What is the weight of a 50 kg woman at the top of Jupiter's
atmosphere, where g = 24.8 N/kg? Give your answer in both
newtons and pounds.

Answers

Answer:

The correct answer is - 1240 newtons; 278.763 lbs.

Explanation:

A 7.80 g bullet has a speed of 620 m/s when it hits a target, causing the target to move 6.30 cm in the direction of the bullet's velocity before stopping. (a) Use work and energy considerations to find the average force (in N) that stops the bullet. (Enter the magnitude.) N (b) Assuming the force is constant, determine how much time elapses (in s) between the moment the bullet strikes the target and the moment it stops moving. s

Answers

Answer:

[tex]23796.19\ \text{N}[/tex]

[tex]0.0002032\ \text{s}[/tex]

Explanation:

F = Force

s = Displacement = 6.3 cm

m = Mass of bullet = 7.8 g

v = Velocity of bullet = 620 m/s

t = Time taken

Work done is given by

[tex]W=Fs[/tex]

Kinetic energy is given by

[tex]K=\dfrac{1}{2}mv^2[/tex]

Using work energy considerations we get

[tex]Fs=\dfrac{1}{2}mv^2\\\Rightarrow F=\dfrac{1}{2s}mv^2\\\Rightarrow F=\dfrac{1}{2\times 0.063}\times 7.8\times 10^{-3}\times 620^2\\\Rightarrow F=23796.19\ \text{N}[/tex]

The average force that stops the bullet is [tex]23796.19\ \text{N}[/tex].

Force is given by

[tex]F=m\dfrac{v-u}{t}\\\Rightarrow t=m\dfrac{v-u}{F}\\\Rightarrow t=7.8\times 10^{-3}\times \dfrac{620}{23796.19}\\\Rightarrow t=0.0002032\ \text{s}[/tex]

The time taken to stop the bullet is [tex]0.0002032\ \text{s}[/tex].

what is the mass of a ball rolling at 4.5m/s if it's momentum is 3.5 kg•m/s?​

Answers

Answer:

The ball has a mass of 7/9 kg

Explanation:

Momentum is just mass times velocity, so to find its mass, we can simply divide the given momentum by the given velocity.

[tex]3.5 kg\frac{m}{s} \div 4.5\frac{m}{s} = \frac{7}{9}kg[/tex]

1. What is matter?
2. What are the three phases of matter?
3. Describe how gas particles move.
4. What is temperature?
5. The slower the particles, the ______________ the temperature.
6. A change in temperature causes what?
7. What is the difference between boiling and evaporation?
8. What is sublimation?
9. Name the three ways thermal energy is transferred.
10. Sunburn is an example of what?
11. Give an example of convection.
12. What is conduction?
13. What is the difference between conductors and insulators?

Answers

2. The three phases of matter is solid, liquid, gas

Answer:

1.matter is any substance that has mass and takes up space by having volume.

2.The three fundamental phases of matter are solid, liquid, and gas (vapour),

3.In gases the particles move rapidly in all directions, frequently colliding with each other and the side of the container. With an increase in temperature, the particles gain kinetic energy and move faster. ... In liquids, particles are quite close together and move with random motion throughout the container.

3.In gases the particles move rapidly in all directions, frequently colliding with each other and the side of the container. With an increase in temperature, the particles gain kinetic energy and move faster. ... In liquids, particles are quite close together and move with random motion throughout the container.

g We have studied diffraction from a single slit, where light is sent through a thin opening. A similar phenomena occurs when light bends around a thin object, like a human hair. Here the width of the hair plays the role of the width of the single slit. Measurements found that when a beam of light of wavelength 632.8 nm was shone on a single strand of hair, the first dark fringe on either side of the central bright spot were 5.22 cm apart. If the screen is 1.25 meters away, how thick was this strand of hair?

Answers

Answer:

[tex]3.031\times 10^{-5}\ \text{m}[/tex]

Explanation:

[tex]y[/tex] = Distance between central maxima and first minimum

m = Order = 1

d = Thickness of hair

[tex]\lambda[/tex] = Wavelength = 632.8 nm

L = Distance between light source and screen = 1.25 m

Width of central maximum is given by

[tex]2y=5.22\times 10^{-2}\\\Rightarrow y=\dfrac{5.22\times 10^{-2}}{2}\\\Rightarrow y=0.0261\ \text{m}[/tex]

Distance between central maxima and first minimum is given by

[tex]y=L\tan\theta_{min}\\\Rightarrow \tan\theta_{min}=\dfrac{y}{L}\\\Rightarrow \tan\theta_{min}=\dfrac{0.0261}{1.25}\\\Rightarrow \theta_{min}=\tan^{-1}0.02088\\\Rightarrow \theta_{min}=1.1962^{\circ}[/tex]

Since [tex]\theta[/tex] is small [tex]\tan\theta_{min}=\sin\theta_{min}[/tex]

[tex]\sin\theta_{min}=\dfrac{m\lambda}{d}\\\Rightarrow d=\dfrac{m\lambda}{\sin\theta}\\\Rightarrow d=\dfrac{1\times 632.8\times 10^{-9}}{\sin1.1962^{\circ}}\\\Rightarrow d=3.031\times 10^{-5}\ \text{m}[/tex]

The strand of hair is [tex]3.031\times 10^{-5}\ \text{m}[/tex] thick.

list the 5 components of fitness

Answers

Yeah what the first person said is the answer you your question

[O.05]Which of these Earth spheres interact with oceans during beach erosion?

geosphere
hydrosphere
cryosphere
atmosphere

Answers

Answer:

hydrosphere of these Earth spheres interact with oceans during beach erosion.

Answer:

Geosphere

Explanation:

The geosphere is the solid parts of the earth including rocks, minerals, and sand on the beach. The shoreline is where the geosphere meets the ocean. This is how they interact during erosion.

It is not the hydrosphere because the ocean is a part of the hydrosphere.

A turtle crawls at 4.32 m/s to cover the short 3.84 m distance to his food bowl. How long does it take?

Answers

Speed=Distance/Time. so you need to do distance/speed to get time. 3.84/4.32= .88888888889 seconds to get to his food bowl

Which one of the following statements concerning the buoyant force on an object submerged in a liquid is true?
A) The buoyant force depends on the mass of the object.
B) The buoyant force depends on the weight of the objeet.
C) The buoyant force is independent of the density of the liquid.
D) The buoyant force depends on the volume of the liquid displaced.
E) The buoyant force will increase with depth if the liquid is incompressible.

Answers

Answer:

D) The buoyant force depends on the volume of the liquid displaced.

Explanation:

Buoyancy can be defined as an upward force which is created by the water displaced by an object.

According to Archimede's principle, it is directly proportional to the amount (weight) of water that is being displaced by an object.

Thus, the greater the amount of water an object displaces; the greater is the force of buoyancy pushing the object up.

The buoyancy of an object is given by the formula;

[tex] Fb = pgV [/tex]

[tex] But, \; V = Ah [/tex]

[tex] Hence, \; Fb = pgAh [/tex]

Where;

Fb = buoyant force of a liquid acting on an object.g = acceleration due to gravity. p = density of the liquid.v = volume of the liquid displaced. h = height of liquid (water) displaced by an object. A = surface area of the floating object.

The unit of measurement for buoyancy is Newton (N).

Additionally, the density of a fluid is directly proportional to the buoyant force acting on it i.e as the density of a liquid decreases, buoyancy decreases and vice-versa.

Hence, the statement concerning the buoyant force on an object submerged in a liquid which is true is that the buoyant force depends on the volume of the liquid displaced.

If an object is completely submerged, the volume of the object is equal to the volume of liquid displaced.

The following problem applies to questions 8 and 9: a glass window acquires a net negative charge on its surface after being cleaned. Particles of dust, which are usually charged positively, start accelerating toward the window. If a particle travels a distance of 1 meter before reaching the window, in a time duration of 10 sec, and if the mass of the particle is 1 micro-gram and the charge on the particle is 10-12 Coulomb, then the magnitude of the electric field intensity is Group of answer choices

Answers

Answer:

the magnitude of the electric field intensity is 20 N/C

Explanation:

 Given the data in the question;

mass m = 1 micro gram = 1 × 10⁻⁹ kg

time duration t = 10 sec

distance s = 1 m

the charge on the particle q = 10⁻¹² Coulomb

force applied on a charged particle due to electric field E is;

F = Eq  ------ equ 1

where q is the charge on the particle.

Also, force on a particle with mass m  will be;

F = ma  ------ equ

where a is acceleration

so F = ma = Eq

ma = Eq -------- equ 3

using kinetic equation

Distance = 1/2×at²

where a is acceleration and t is the time period

now lets consider that initial velocity is zero (0)

Here;

1 m = 1/2 × a × ( 10 s )²

1 m = a × 50 s²

a = 1 m / 50 s²

a = 0.02 m/s²

so, from equation 3

ma = Eq

E = ma / q

we substitute

E = (1 × 10⁻⁹ kg × 0.02) / 10⁻¹² Coulomb

E = 2 × 10⁻¹¹ / 10⁻¹²

E = 20 N/C

Therefore, the magnitude of the electric field intensity is 20 N/C

A ray of light strikes a flat mirror at an angle of 40° from the perpendicular. The light is reflected at
what opposite angle to the same perpendicular line?
a) 40°
b) 50°
c) 30°
d) 60°

Answers

Answer:

a

Explanation:

angle of incidence equals angle of reflection on flat surface

Answer:

40 degress

Explanation:

Other Questions
How many liters are equal to 2,396 milliliters? Use the placement of the decimal point when dividing by a power of 10 to help you solve. 2.396 liters 239.6 liters 23.96 liters 23,960 liters P = 30x + 50y Corner that maximizes profit: (0, 6) What is the profit? No person shall...be deprived of life, liberty, or property, without due process of law. How would this amendment sound if it described the way things really were? What is the subject in this sentence? ---At the front of the room jumpedthe frog. *AtO jumpedroomthefrontfrog A piece of wire is 240 cm long.Peter cuts two 45 cm lengths off the wire.He then cuts the rest of the wire into as many 40 cm lengths as possible.Work out how many 40 cm lengths of wire Peter cuts. Please somebody answer this question fast A. Exports of U.S agriculture goods to postwar Europe B. Resistance to the soviet blockade of west BerlinC. Economic aid to Europe under the Marshall planD. U.S air power over Germany during the World War II If each image represents one mole of the substance pictured, which contains the greatestamount of substance?A)moleculesB) atomsC)formula unitsD)none; all amounts are the same why a small car can stop easier than an 18 wheeler while traveling at 70 mph down the interstate? Brianna has 6 bags of soil. Filling one flowerpot requires 1/3 of a bag of soil. How many flowerpots can be filled with these 6 bags?A.1/2B.2C.18D.24Help I suck at math 0-0 Number the events from earliest (1) to most recent (6) to outline the development of the cell theory. If 7.0 moles of HCl is added to enough iron that the HCl is completely used up, how manymoles of hydrogen gas will be produced? School debates aren't the only forum for rhetoric. Explain the role of rhetoric in legislative bodies like Congress or Parliament. Brainpop Debate(someone please help) Which of the following statements is evidence in the form of an example? A: I strongly believe that breakfast is the most important meal of the day.B: After Susan began eating breakfast every day, she noticed she was much more alert and ready to participate in her morning classes.C: A study of 500 middle-school students in Virginia showed that test scores improved by 15 percent when students ate breakfast.D: An example of a healthy breakfast is an omelet with vegetables, whole grain toast, and orange juice. A line passes through the point (0,-5). The gradient of this line is 3.Write down the equation of this line Which of the following statements are true of cartilaginous joints?A) The spine contains many cartilaginous joints.B) They are the most flexible type of joint.C) They contain cartilage between the bonesD) They are wrapped in ligaments. Jamie took a test. She got 31 correct, and 13 incorrect. Find the percentage of incorrect answers to correct answers. Explain with all steps. Please help test due in 1 hour and its a grade! Will give good review and brainliest! Suppose 7x-5 M=- 3 x-8 and NE 2 2 x - 5 x - 50 X - 14 x +40 and you want to add the fractions M and N, in other words you want to compute 7x-5 3 x - 8 2 x - 5 x - 50 x - 14 x + 40 and simplify the result. We know that, before you can add the fractions, you must find a common denominator and rewrite each fraction so it has that common denominator. Once the rewritten fractions have the same denominator, you can add them and simplify the result. There are four text boxes below. In the first text box, enter a common denominator for the two fractions. In the second text box, rewrite M so that it possesses the common denominator you found. Note that your entry in this text box should equal M, however it should have the common denominator you found. In the third text box, rewrite N so that it possesses the common denominator you found. In the last text box, compute your simplified answer for M N . Make sure that your answer is simplified; the numerator and denominator of your answer for M N should not have common factors. Note that your entry for the common denominator should be a polynomial with integer coefficients. Your other three entries should be fractions that contain polynomials. All of your answers should contain no letters other than the variables that appear in M and N. Do not include an equals sign with any of your answers. All of your expressions should be mathematically correct and not contain non-mathematical symbols. After entering your answers, click the Save Answer button. Your computer will display how your answers were interpreted, and you will have the opportunity to accept these answers or modify them.Enter a common denominator for M and N here: Enter M rewritten here: Enter N rewritten here: Enter your simplified result here: Differentiate between solar dryer method and electric dryer method in 4/4 point. A shirt costs 20$ if it was on sale for 75 percent off what is the discount