Answer:
Hey there! The nuclear symbol for an ion with a charge of +220 protons and 24 neutrons would be written as follows:
220+ 24
The symbol consists of two parts: the atomic number (220+) and the atomic mass (24). The atomic number is the number of protons in the nucleus of an atom, and it is represented by a superscript on the left side of the symbol. The atomic mass is the total number of protons and neutrons in the nucleus, and it is represented by a subscript on the right side of the symbol.
In this case, the atomic number of the ion is 220, which indicates that it has 220 protons in its nucleus. The atomic mass is 24, which indicates that it has a total of 220 protons + 24 neutrons = 244 particles in its nucleus.
________________________________________________________
How do we represent the properties of atoms and ions using nuclear symbols?Nuclear symbols are a way of writing down the important information about atoms and ions in a short and easy-to-read format. They usually consist of two parts: the atomic number and the atomic mass. The atomic number tells us how many protons an atom has in its nucleus, and the atomic mass tells us the total number of protons and neutrons. For example, the nuclear symbol for carbon is 6 12C, which tells us that carbon has 6 protons and 12 particles (6 protons + 6 neutrons) in its nucleus.
How do we determine the number of protons, neutrons, and electrons in an atom or ion?To determine the number of protons in an atom or ion, we can look at its atomic number, which is usually written as a superscript on the left side of the nuclear symbol. For example, if the nuclear symbol for an atom or ion is written as 6 12C, we can tell that it has 6 protons. To determine the number of neutrons, we can subtract the atomic number from the atomic mass. For example, if the atomic mass is 12 and the atomic number is 6, then the number of neutrons is 12 - 6 = 6. To determine the number of electrons, we can just look at the overall charge of the atom or ion. If it is neutral, then it will have the same number of protons and electrons. If it is positive or negative, then it will have more or fewer electrons than protons, respectively.
In the last minute rush to assemble the demonstration, your teacher spills the lead chloride all over their sandwich and is left with 57.2 grams in the bottle. How much potassium iodide should be weighed out to convert all of the lead chloride to product?
H+ ions increase in concentration at lower pH values. Calculate how many more H+ ions there are in a solution at a pH = 2 than in a solution at a pH = 6. Find the concentration of H+ ions at a pH = 2 and at a pH = 6 in Table B. Then divide the concentration of H+ ions at a
pH = 2 by the of H+ ions at a pH = 6. Record your answer in Table C.
What is the concentration of H+ ions at a pH = 2?
mol/L
What is the concentration of H+ ions at a pH = 6?
mol/L
How many more H+ ions are there in a solution at a
pH = 2 than in a solution at a pH = 6?
need ASAP give
brainliest
The number of hydrogen ions, H⁺, that are there in a solution at a
the pH of 2 than in a solution at a pH of 6 is 1000 or 10⁴.
What is the pH of a solution?The pH of a solution is the negative logarithm in base 10 of the hydrogen ion concentration of the solution.
pH = - log [H⁺]
Hence, the hydrogen ion concentration of a solution whose pH is given is determined using the formula given below as follows:
[tex][H^{+}] = 10^{-pH}[/tex]
For the solution of pH of 2
[H⁺] = 10⁻²
[H⁺] = 0.01 M
For the solution of pH of 6
[H⁺] = 10⁻⁶
[H⁺] = 0.000001 M
The ratio of the hydrogen ion concentration of the solutions will be:
Ratio of hydrogen ions = 0.01 / 0.000001 M
Ratio of hydrogen ions = 10000 or 10⁴
Learn more about pH of solutions at: https://brainly.com/question/172153
#SPJ1
Where do the 2 ATP produced in fermentation come from?
Glycolysis during fermentation only yields two ATP each glucose molecule, which is significantly less ATP than is produced during respiration.
What distinguishes a compound from a molecule?A collection of more than two atoms joined by chemical bonds is referred to as a molecule. The compound is a mixture made up of two or more distinct kinds of elements that are chemically combined in a predetermined ratio. Not every molecule is a compound. Molecules make up all chemicals.
Just how many atoms make up a molecule?According to the context, it term might or might not include ions that meet this requirement. A molecule is a collection of atoms that are held together by the attractive forces called as chemical bonds.
To know more about molecule visit:
https://brainly.com/question/19556990
#SPJ4
A 15.0-mL sample of 0.100 M Ba(OH)2 is titrated with 0.125 MHCl.
Calculate the pH for different points throughout the titration curve and make a sketch of the curve.
The pH of a 0.100 M Ba(OH)2 solution is decreased to 6.51 when 15.0 mL of 0.125 M HCl is added. The titration curve of the reaction is a decreasing graph, with the pH decreasing as the volume of the HCl added increases.
Volume of HCl Added (mL) | pH
--------------------------|-----
0.0 | 12.32
2.5 | 10.98
5.0 | 9.81
7.5 | 8.79
10.0 | 7.94
12.5 | 7.18
15.0 (endpoint) | 6.51
The pH of a 0.100 M Ba(OH)2 solution is decreased to 6.51 when 15.0 mL of 0.125 M HCl is added. The titration curve of the reaction is a decreasing graph, with the pH decreasing as the volume of the HCl added increases.
learn more about solution here
https://brainly.com/question/7932885
#SPJ4
A compound is composed of carbon and hydrogen and has an empirical
formula of CH. The molar mass of the compound is experimentally
determined to be 78.12 g/mol. What is the molecular formula for the
compound?
A compound has the empirical formula CH and is made up of carbon and hydrogen. the compound's molecular formula is C6 H6.
How is a molecular compound identified?Compounds that involve a metal binding with a non-metal or a semi-metal will typically exhibit ionic bonding. Molecular compounds are those whose only non-metals or semi-metals contain non-metals. These compounds exhibit covalent bonding.
The compound with the lowest whole number ratio can be found in its empirical formula.
The empirical formula for weight is 12+1=13,
while the molecular formula for weight is 13 78 = 6.
The molecular formula for weight is (CH)n = (CH)6 =C6 H6.
To learn more about compound's molecular here:
https://brainly.com/question/23088724
#SPJ1
Is it true that only 2 ATP are formed during anaerobic respiration?
Pyruvate is converted to lactate in anaerobic conditions by anaerobic glycolysis. During anaerobic respiration, two ATP molecules are produced.
What is the primary step in glycolysis?
The method by which glucose is metabolized to produce energy is known as glycolysis. It generates water, ATP, NADH, and two pyruvate molecules. It doesn't need oxygen to happen because it happens in a cell's cytoplasm. Both in aerobic and anaerobic organisms, it happens.
How is glycolysis referred to?
Gustav Embden, Otto Meyerhof, & Jakub Karol Parnas identified the Embden-Meyerhof-Parnas (EMP) pathway, which is the most typical kind of glycolysis. The Entner-Doudoroff pathway and several heterofermentative & homofermentative pathways are examples of additional pathways that are included in the term "glycolysis."
To know more about glycolysis visit:
https://brainly.com/question/14076989
#SPJ4
In anaerobic circumstances, anaerobic glycolysis converts pyruvate to lactate. Two ATP molecules are created during anaerobic respiration.
What is the first stage of glycolysis?The process of converting glucose into energy is known as glycolysis. Water, ATP, NADH, and two pyruvate molecules are produced. It does not require oxygen to occur since it occurs in the cytoplasm of a cell. It occurs in both aerobic and anaerobic species.
How is glycolysis defined?The Embden-Meyerhof-Parnas (EMP) route, which is the most common kind of glycolysis, was discovered by Gustav Embden, Otto Meyerhof, and Jakub Karol Parnas. Additional processes included in the word "glycolysis" include the Entner-Doudoroff pathway and numerous heterofermentative and homofermentative pathways.
Here,
Anaerobic glycolysis converts pyruvate to lactate under anaerobic conditions. During anaerobic respiration, two ATP molecules are produced.
To learn more about glycolysis, go to:
brainly.com/question/14076989
#SPJ4
Diatomic elements are important. what makes them different from other elemental substances?
Diatomic elements are molecules composed of two atoms of the same element covalently bonded together, as opposed to other elements which are composed of only one atom.
What is diatomic?Diatomic elements are those elements that exist in nature as molecules made up of two atoms. Examples of diatomic elements include oxygen (O2), hydrogen (H2), nitrogen (N2), fluorine (F2), chlorine (Cl2), and iodine (I2). These elements are the only elements that exist naturally as diatomic molecules.
This gives diatomic elements distinct properties compared to other elemental substances, such as having two different electron configurations, and having different spin states. Diatomic elements also have properties that are unique to them, such as having different boiling points, higher densities, and different reactivity. Additionally, diatomic elements are essential for life as many are used in crucial biochemical processes.
To know more about Diatomic elements click-
https://brainly.com/question/29078214
#SPJ4
7. What is one of the BEST actions the US government can take to slow global warming?
-provide tax credits to those who carpool
-encourage people to buy electronic books versus paperbacks or hardbacks
-produce commercials that urge people to recycle
-invest in clean technologies such as wind and solar power
one of the BEST actions the US government can take to slow global warming is invest in clean technologies such as wind and solar power
What is the US government doing about global warming?EPA works with industry and others to reduce greenhouse gas emissions through regulatory initiatives and partnership programs. Within the Agency, EPA implements a range of strategies to reduce its own greenhouse gas emissions, increase energy efficiency, and take other steps to reduce its carbon footprintReaching 100% carbon pollution-free electricity by 2035. Achieving a net-zero emissions economy by 2050. Delivering 40% of the benefits from federal investments in climate and clean energy to disadvantaged communitiesMobilizing a whole-of-government approach, the United States is scaling up action at home and abroad to put the world on a path to reach net-zero emissions by 2050 and to achieve the global goal on adaptation. Learn more about the United States at COP27 and the U.S. Center
To learn more about global warming refers to:
brainly.com/question/26402403
#SPJ1
How many atoms are in 1.4 moles of Cadmium?
Answer:
Answer Below
Explanation:
Answer: 8.4322×1024atoms atoms are in 1.4 moles of cadmium. Cadmium is present in some foods and is emitted when fossil fuels like as coal and oil is used, smoking cigarettes.
Answer:
The answer is 8.4308 × 10²³ atoms
Explanation:
Multiply by Avogadro's number (Nₐ)
Nₐ = 6.022 × 10²³ mol⁻¹
Now,
1.4 × 6.022 × 10²³ = 8.4308 × 10²³
Thus, 8.4308 × 10²³ atoms are in 1.4 moles of Cadmium.
In a given reaction, the rate may be expressed as either rate What must be true about X or Y if the reaction is proceeding in the forward direction
In a given reaction, the rate may be expressed as either the rate of formation of a product (X) or the rate of consumption of a reactant (Y). If the reaction is proceeding in the forward direction, the rate of formation of the product (X) will be positive and the rate of consumption of the reactant (Y) will be negative.
This means that X is being produced at a faster rate than it is being consumed and Y is being consumed at a faster rate than it is being produced.
Alternatively, if the reaction proceeds in the opposite direction, the rate of formation of products (X) is negative and the rate of consumption of reactants (Y) is positive. This means that X is consumed faster than it is produced, and Y is produced faster than it is consumed.
Learn more about the rate of reaction here: https://brainly.com/question/24795637
#SPJ4
A balloon originally has 0.100 moles of helium and has a volume of 0.500 L. If 0.670 grams of He are added to the balloon, what will the new volume be, in L
Helium: The new volume of the balloon is 0.6182 L.
Colorless, odourless , tasteless, inert, non-toxic helium is a monatomic gas. It is the lightest element in the periodic table and the second most abundant element in the universe.
The new volume of the balloon can be calculated using the ideal gas law, which states that PV = nRT, where P is the n represents the number cubic moles of gas, V represents the volume, R is the real gases constant, and the temperature is T.
First, we need to calculate the number of moles of helium in the balloon after the additional 0.670 grams have been added:
n = 0.670 g He/4.003 g/mol = 0.167 mol
The total number of moles in the balloon is now 0.267 mol. We can use the ideal gas law to calculate the new volume:
V = (0.267 mol)(0.0821 L·atm/K·mol)(273 K)/1 atm = 0.6182 L
To learn more about Helium
https://brainly.com/question/24402295
#SPJ4
What are the 3 steps for treating a chemical burn?
Remove dry chemicals. Remove contaminated clothing or jewelry. Bandage the burn. Rinse again if needed.
A chemical burn is infection and destruction of human tissue because of exposure to a chemical, generally with the aid of direct contact with the chemical or its fumes. Chemical burns can occur in the domestic, at work or school, or as a result of an twist of fate or assault. although few humans in the united states of america die after contact with chemical substances in the home, many substances not unusual in both living and garage areas can do extreme damage.
To know more about chemicals click here
https://brainly.com/question/26487468
#SPJ4
Define corrosion and explain the different basis of tendency or resistance of different
metals to corrosion
Corrosion is the process of chemical or electrochemical attack of materials by their external environment.
The tendency/resistance of different metals to corrosion largely depends on the composition of the metal. Iron and steel corrode in the presence of oxygen due to oxidation, while some metals such as chromium, nickel and molybdenum provide a protective layer of oxide film on the surface of the metal which is then resistant to corrosion. Other metals such as aluminum and zinc form sacrificial oxide layers which corrode and protect the metal from becoming completely damaged.
Explain the reason why you tested electrical conductivity with a solution containing both methanol and water.
In comparison to non-polar hydrocarbon dielectrics like gasoline and diesel fuel, methanol is a polar substance like water and has a relatively high conductivity (conductivities less than 1 x 10⁴ pS/m).
Does methanol have a higher conductivity than water?Therefore, the self dissociation into ions for methanol and ethanol will be less strong than in water. But even in pure ethanol and methanol solutions, these ions will still exist and conduct electricity, albeit at very low conductivities.
Water's electrical conductivity is a measure of how well it can carry a current of electricity. The amount of electrical current that can be conducted in water increases with the concentration of dissolved charged chemicals, also referred to as salts.
To know more about electrical conductivity visit:
https://brainly.com/question/29765686
#SPJ4
Which action characterized Earth's earliest atmosphere (atmosphere I) ?
Helium and hydrogen gases escaped earth's gravity.
Increased oxygen allowed reptiles to thrive.
Heat energy was retained and water vapor condensed.
Ultraviolet light split water vapor into hydrogen and oxygen
The action "Heat energy was retained and water vapor condensed." characterized Earth's earliest atmosphere (atmosphere I)
Earth's earliest atmosphere, also known as atmosphere I, was primarily composed of methane, ammonia, and water vapor. The heat energy from the young Earth's molten surface caused these gases to rise and cool, leading to the condensation of water vapor and the formation of oceans. This process is known as the "greenhouse effect," as the retained heat energy allowed for the formation of a hospitable environment for the emergence of life. Ultraviolet light from the sun also played a role in the formation of the atmosphere by breaking down water vapor into hydrogen and oxygen, but this was not the primary process that characterized atmosphere I.
Learn more about Atmosphere here: brainly.com/question/26767532
#SPJ4
What are the types of chemical bonds? Describe each.
Benzene is a liquid with molecular formula C6H6
Ethene is a gas with molecular formula C2H4
Which statement is correct?
A 1 mole of benzene and 1 mole of ethene contain the same number of atoms.
B 1 mole of benzene and 1 mole of ethene both have a volume of 24 dm³ at room temperature and pressure.
C Both benzene and ethene have the same empirical formula.
D The number of carbon atoms in 0.5 moles of ethene is equal to the Avogadro constant.
And why is it that way?
Answer:
Benzene is a hydrocarbon with molecular formula of C6 H12 including 3πbond which are rotating
benzene is also a aromatic but ethene is not a aromatic
Explanation:
Answer: No, one mole of benzene (C6H6) and one mole of ethene (C2H4) will have the same number of molecules (6.02x10^23 benzene molecules and 6.02x10^23 molecules of ethene). However, one molecule of benzene consists of 12 atoms, while one molecule of ethene consists of 6 atoms.
what percent composition tell you about a molecule
Answer:
tells you by mass what percent of each element is present in a compound.
Explanation:
Why do halogens get less reactive?
The halogens gets less reactive as we move down the group because the atomic mass will increases and the number of the electrons are increases.
The halogens get less reactive as we move top to bottom in the group in the periodic table as the atomic mass of the group 17 elements that is halogens will increases and as we move from from top to bottom in the periodic table the electrons are added and the number of electrons are increases.
This is reason , that the reactivity of the group 17 elements that is halogens will decreases as we move from top to bottom.
To learn more about halogens here
https://brainly.com/question/15370711
#SPJ4
Container A holds 747 mL747 mL of ideal gas at 2.90 bar2.90 bar . Container B holds 119 mL119 mL of ideal gas at 4.30 bar4.30 bar . If the gases are allowed to mix together, what is the partial pressure of each gas in the total volume
the partial pressure of gas A in the total volume is 3.57 bar, and the partial pressure of gas B in the total volume is 0.70 bar.
When the gases are allowed to mix together, the total pressure of the mixture is equal to the sum of the partial pressures of each gas. The partial pressure of each gas is equal to the product of the total pressure and the mole fraction of that gas. To find the mole fraction of each gas, we first need to find the number of moles of each gas. The number of moles of gas in container A is given by PV/RT where P is the pressure, V is the volume, R is the ideal gas constant and T is the temperature.
n_A = (2.90 bar * 747 mL) / (8.314 J/molK * (273.15 + 23)) = 0.0295 mol
The number of moles of gas in container B is given by PV/RT
n_B = (4.30 bar * 119 mL) / (8.314 J/molK * (273.15 + 23)) = 0.0045 mol
The total number of moles of gas in the mixture is the sum of the number of moles of gas in container A and container B.
n_total = n_A + n_B = 0.0295 mol + 0.0045 mol = 0.0340 mol
The mole fraction of gas A in the mixture is the number of moles of gas A divided by the total number of moles of gas.
x_A = n_A / n_total = 0.0295 mol / 0.0340 mol = 0.8735
The mole fraction of gas B is
x_B = n_B / n_total = 0.0045 mol / 0.0340 mol = 0.1324
The partial pressure of gas A is equal to the total pressure multiplied by the mole fraction of gas A.
P_A = (0.8735) * (2.90 bar + 4.30 bar) = 3.57 bar. The partial pressure of gas B is equal to the total pressure multiplied by the mole fraction of gas B. P_B = (0.1324) * (2.90 bar + 4.30 bar) = 0.70 bar
So the partial pressure of gas A in the total volume is 3.57 bar, and the partial pressure of gas B in the total volume is 0.70 bar.
Learn more about partial pressure here:
https://brainly.com/question/14119417
#SPJ4
Which is true of an atom? A. The valence electrons make up the majority of the mass and volume of an atom. B. The electron cloud makes up the majority of the mass and volume of an atom. C. The valence electrons make up the majority of the mass of an atom but do not take up much volume. D. The electron cloud makes up the majority of the volume of an atom but does not have much mass
The statement that is true about an atom is D. The majority of volume of an atom is make up by the electron cloud which has no mass.
In an atom, there are three sub-atomic particles that are protons, electrons and neutrons. The protons and neutrons are present inside the nucleus while the electrons revolve around the orbits i.e., circular orbits. The majority of volume of an atom is make up by the electron cloud which has no mass. Electrons are negatively charged in nature while the positive species are protons and neutrons carry no charge in them. The circular path is termed as orbits in which electrons revolve.
Thus, option D is the correct choice.
To learn more about atom check the link below:
https://brainly.com/question/6258301
#SPJ4
What happens to the reactivity of metals as you go from left to right a decreases C Doubles B increases D stays the same?
The reactivity of the metals as we go across in the period or from the left to the right horizontally in the periodic table it will decreases.
The reactivity of the metals as we move across the period from left to right in the periodic table it will decreases. the reactivity of the metals as we move in the group from top to the bottom in the periodic table it will increases due the increase in the size of the elements from top to bottom.
Thus, the reactivity of the metals decreases as we move across period from left to the right in the periodic table.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
Beryllium iodide + strontium sulfate --->
Normal:
Complete ionic:
Net ionic:
Normal
BeI2 + SrSO4 → SrI2 + BeSO4
Complete ionic:
Be2+ + 2I- + Sr2+ + SO42- → Sr2+ + 2I- + Be2+ + SO42-
Net ionic:
Be2+ + 2I- → Sr2+ + 2I- + Be2+
The complete ionic equation for this reaction is the same as the normal equation, except that the reactants and products are written as their respective ions.
The net ionic equation is the same as the complete ionic equation, except that the spectator ions, which are ions that appear on both the reactant and product sides, are omitted.
In this reaction, strontium sulfate and beryllium iodide react to form strontium iodide and beryllium sulfate. The spectator ions are Sr2+ and 2I-, which appear on both sides of the equation and cancel out, leaving the net ionic equation.
For more questions like Ionic equation click the link below:
https://brainly.com/question/30006628
#SPJ4
When the equation 4. 78X^2-2. 14x-1. 60=0 is solved the two values of unknown x are ____ and _____
x has the values (2.14 + √(23.288)) / 9.56 and (2.14 - √(23.288)) / 9.56.
What Is a Quadratic Equation?Quadratic equations are the degree two, one-variable polynomial equations of the form f(x) = ax^2 + bx + c = 0 with a, b, c, and R R and a 0 being the variables. In its most basic form, it is a quadratic equation where "a" denotes the leading coefficient and "c" is the absolute term of f(x). The values of x that satisfy the equation (, ) are the quadratic equation's roots.
The name "quadratic equation" is for what?Intricate relationships exist between square and quadrangle (another name for rectangle) difficulties and quadratic equations.
The Latin term quadratus, which means square, is where the word "quadratic" originates.
The quadratic formula or factoring can be used to get the solution to the problem 4.78x^2-2.14x-1.60=0.
x = (-b (b^2 - 4ac)) / (2a) where a = 4.78, b = -2.14, and c = -1.60 is the quadratic formula.
Plugging in the values we get:
x = (-(-2.14) ± √((-2.14)^2 - 4(4.78)(-1.60)) ) / (2(4.78))
x = (2.14 ± √(4.6016 + 18.688)) / 9.56
x = (2.14 ± √(23.288)) / 9.56
So the two values of x are:
x = (2.14 + √(23.288)) / 9.56 and x = (2.14 - √(23.288)) / 9.56
To know more about Quadratic equations visit: brainly.com/question/30098550
#SPJ4
What is the relative rate of diffusion of CH4 and NO2?
Answer:
=32×1632×√1632=34√2.
Explanation:
Enrichment Activity 2.
Next up, let us compare the frequencies of different EM waves. Copy and answrr the table on page 16, refer to figure 2, then answer the question that follows.
PA HELP POOOOO
EM rays, or electromagnetic radiation, is a form of energy that is emitted and absorbed by charged particles.
What are Gamma rays?
Gamma rays are a type of electromagnetic radiation, similar to visible light and x-rays, but with much higher energy. They are produced by the hottest and most energetic objects in the universe, such as neutron stars, pulsars, and black holes. Gamma rays can also be produced artificially, in particle accelerators or nuclear reactions. Gamma rays have the shortest wavelength and highest energy of any type of electromagnetic radiation.
| Wave | Frequency (Hz) |
| Radio Waves | < 3 x 10^9 |
| Microwaves | 3 x 10^9 |
| Infrared Radiation | 3 x 10^12 |
| Visible Light | 4 x 10^14 |
| Ultraviolet | 7.5 x 10^14|
| X-Rays | 3 x 10^16 |
| Gamma Rays | 3 x 10^19 |
Which type of EM wave has the highest frequency?
Gamma Rays have the highest frequency with 3 x 10^19 Hz.
To know more about Gamma rays,
https://brainly.com/question/2399890
#SPJ4
Express the answers to the following operations with the proper number of significant figures.
4. 108 x 5. 3
____ X 10^
The answer to the given operations with proper number of significant figures is 5.7 × 10².
Significant figures or numbers can be defined as those particular numbers or digits which are essential in determining the accuracy of a particular value. For example, 4.392 has 4 significant figures.
When we are rounding off a number to write it with the proper number of significant figures, we first need to decide the amount of significant figures that it should have.
On calculating the given operation,
⇒ 108 × 5.3 = 572.4
In significant figures,
= 5.72 × 10²
To learn more about significant figures here
https://brainly.com/question/29153641
#SPJ4
A controlled experiment _____.Group of answer choicesIs repeated many times to ensure that the results are accurateProceeds at a slow pace to guarantee that the scientist can carefully observe all reactions and process all experimental dataIncludes at least two groups, one of which does not receive the experimental treatmentIncludes at least two groups, one differing from the other by two or more variables
An experimental group and a control group are both included in a controlled experiment. At least one of the two groups—the group that is not subjected to the experimental treatment—is present in a controlled experiment.
In controlled experiment, the researcher wants to determine how one or more variables affects on something. Since many different variables affecting the results, and most of them are not of interest to the researcher, and they will kept under control. They must remain constant. There must be at least of two groups. One of them is control group, and the other one is experimental group.
During experiment, a researcher compares between two groups. Both are composed of individuals which is coming from same population, so they are very identical in all the aspects except for independent variables that the researcher changes in to the experimental group and they observe that how they will affect the individuals. Control group is used to identify any of the other factors influencing the results which is obtained in the study, apart from the modified variables of the treatment. Independent variable keeps constant in control group.
The experimental group receives the treatment. The researcher voluntarily modifies the independent variable's values to see how it impacts the subjects. There can be several experimental groups.
To know more about experimental here
https://brainly.com/question/28540297
#SPJ4
A 325 0 g piece of gold at 427 degree C is dropped into 200.OmL of water at 22 0 degree C. Calculate the final temperature of the mixture. Specific Heat of gold
The final temperature of the mixture is 218.1°C.
The Specific Heat of gold 0.0123 J.
What is specific heat ?Specific heat is known to be the amount of energy required to raise the temperature of a unit mass of a substance by 1 degree. It is a physical property of matter, usually expressed in units of Joules/Kilograms/Kelvin (J/kgK).
Mass of gold = 325 g
Heat absorbed by water = mass of gold x specific heat x temperature change
325 x 0.128 x 405
Heat absorbed by water = 154,400 J
Heat capacity of water = mass of water x specific heat
200 x 4.184
Heat capacity of water = 836.8 J/degree Celsius
Final temperature = (heat absorbed by water ÷ heat capacity of water) + Initial temperature
Final temperature = (154400 ÷ 836.8) + 22
Final temperature = 218.1°C
Q = mcΔT
836.8 J/°C = 325 × c × (427°C - 218.1°C)
836.8 J/°C = 325 × c × 208.9
c = 836.8/(325 × 208.9)
c = 836.8/67,892.5
c = 0.0123 J
To learn more specific heat
https://brainly.com/question/21041726
#SPJ4
John is completing a lab in which he is using the corrosive base sodium hydroxide (NaOH). For this laboratory experiment, what types of safety precautions should he take
Please put on a lab apron. It helps shield clothing from damage and stains. Examining glass for fractures and chips. This damaged or chipped glassware needs to be properly disposed of.
In order to deal with it safely, we must take the appropriate precautions. Skin burns or other skin injury can be brought on by sodium hydroxide. Additionally, it can injure eyes. Learn as much as you can about the chemicals that will be utilized, including any exposure or leak risks. Find the spill kits and learn how to use them. Verify labels and throw away any chemicals that aren't 100 percent pure. For ease of access, alphabetize the lab chemicals. Security is the practice of keeping unwelcome dangers and hazards out of the lab environment.
To learn more about sodium hydroxide click here https://brainly.com/question/29327783
#SPJ4