Many large organizations, including those in the healthcare, finance, and technology industries, are heavily using AI-enabled eHRM processes now.
AI-enabled eHRM (Electronic Human Resource Management) processes are becoming increasingly popular among organizations, as they allow for more efficient and accurate management of employee data. This technology uses AI to analyze data and make predictions about employee performance and behavior, allowing HR managers to make better-informed decisions about hiring, training, and retention.
Many large organizations in various industries, including healthcare, finance, and technology, are now using AI-enabled eHRM processes to improve their HR operations. In healthcare, for example, AI-powered eHRM systems can help identify patterns in patient data to improve healthcare outcomes.
In finance, these systems can help with compliance and regulatory reporting. In technology, AI-enabled eHRM processes can help identify and attract top talent, and improve employee engagement and retention.
Learn more about technology here:
https://brainly.com/question/28288301
#SPJ11
if dfbetween = 2 and dfwithin = 14, using α = 0.05, fcrit = _________.
If our calculated F-statistic is greater than 3.10, we can reject the null hypothesis at the 5% level of significance.
To find the value of fcrit, we need to know the numerator and denominator degrees of freedom for the F-distribution. In this case, dfbetween = 2 and dfwithin = 14. We can use these values to calculate the F-statistic:
F = (MSbetween / MSwithin) = (SSbetween / dfbetween) / (SSwithin / dfwithin)
Assuming a two-tailed test with α = 0.05, we can use an F-table or calculator to find the critical value of F. The critical value is the value of the F-statistic at which we reject the null hypothesis (i.e., when the calculated F-statistic is larger than the critical value).
Using an F-table or calculator with dfbetween = 2 and dfwithin = 14 at α = 0.05, we find that fcrit = 3.10.
To know more about null hypothesis visit:
https://brainly.com/question/28920252
#SPJ11
What sort of traversal does the following code do? (Note: Java's ArrayList.add() method adds to the end of a list. Its remove(int i) method takes an index and removes the object at that index.) public static List traversal(Node n, Map> neighbors) { ArrayList result = new ArrayListo(); ArrayList toVisit = new ArrayList>(); toVisit.add(n); while (!toVisit.isEmpty()) { Node currNode = toVisit.remove(toVisit. length() - 1); result.add(currNode); currNode.setVisited(); for (Edge outgoing Edge : neighbors.get(currNode)) { Node nbr = outgoingEdge.getDestination(); if (!nbr.isVisited()) { toVisit.add(nbr); } } } return result;
The following code does a depth-first traversal. It starts at a given node 'n' and explores as far as possible along each branch before backtracking.
The algorithm uses a stack (in the form of an ArrayList called 'toVisit') to keep track of nodes to visit. The first node to visit is added to the stack. Then, while the stack is not empty, the code removes the last node added to the stack (i.e., the most recently added node) and adds it to the 'result' ArrayList. The code then marks the current node as visited and adds its unvisited neighbors to the stack. By using a stack to keep track of the nodes to visit, the algorithm explores as deep as possible along each branch before backtracking.
To know more about depth-first traversal visit:
https://brainly.com/question/31870547
#SPJ11
Activity 10-4 Update Starting and Testing an Apache Web Server Objective: Check the status of an Apache Web server, stop and start the apache2 service, and test an Apache Web server at the command line and with a GUI tool. Description: In this activity, you use the command line to check the status of your Apache Web server and start and stop the apache2 service. You also use YaST to check the status of an Apache Web server, start the service and assign runlevels 3 and 5. Finally you use Firefox to view the Apache test Web page. 1. If the terminal window is still open, switch to the root user. If you don’t have the terminal window open or if your openSUSE virtual machine where you installed Apache web server is not up and running, then start it and log in and open the terminal window and elevate to root. 2. Determine whether Apache Web Server is running by typing rcapache2 status and pressing Enter at the command line. Type q to quit the command results display and return to the command prompt. 3. Start Apache Web Server by typing rcapache2 start and pressing Enter. 3a. Verify that the server is running by opening a browser and typing http://localhost as the url you wish to navigate to. What response do you get?
In this activity, you will learn how to check the status of an Apache Web server, start and stop the apache2 service using the command line and YaST, and test the Apache Web server using a GUI tool. Firstly, you need to switch to the root user in the terminal window. If you don't have the terminal window open, start your openSUSE virtual machine where you installed Apache web server, log in, and open the terminal window and elevate to root.
Next, determine whether Apache Web Server is running by typing rcapache2 status and pressing Enter at the command line. Type q to quit the command results display and return to the command prompt. If the server is not running, you can start Apache Web Server by typing rcapache2 start and pressing Enter. Once you have started the server, you can verify that it is running by opening a browser and typing http://localhost as the url you wish to navigate to. If the server is running, you should be able to see the Apache test Web page on your browser. This indicates that your Apache Web server is up and running and you can proceed with testing your web pages or applications. Finally, you can also check the status of an Apache Web server, start the service, and assign runlevels 3 and 5 using YaST. This provides you with an alternative method to manage your Apache Web server on openSUSE. In conclusion, this activity provides you with the necessary skills to check the status of an Apache Web server, start and stop the apache2 service using the command line and YaST, and test the Apache Web server using a GUI tool.
Learn more about server here
https://brainly.com/question/30172921
#SPJ11
In the update Starting and Testing an Apache Web Server, follower the steps by: Open terminal, switch to root user by running "su -", check Apache status with "rcapache2 status". If active, it shows a message. Start Apache with: "rcapache2 start" to initiate the server service.
What are the steps?To do the above Update Starting and Testing an Apache Web Server, you need to follow the steps given below:
Open a terminal window and switch to the root user by running the command:Check the status of the Apache Web server by typing the a "rcapache2 status " command and pressing EnterThe command will display the status of the Apache Web server. If it is running, it will depict a message showing that it is active.Start the Apache Web server by inputting the rcapache2 start command and clicking Enter:To verify that the server is running, open a web browser and enter the following URL in the address bar:If the Apache Web server is running correctly, you need to see the default Apache test page.Learn more about Apache Web Server from
https://brainly.com/question/9081826
#SPJ4
is it possible to conduct a valid plane strain fracture toughness test for a crmov steel alloy under the following conditions: kic = 53 mpam, σys = 620 mpa, w = 6 cm and plate thickness, b = 2.5 cm?
To determine if a valid plane strain fracture toughness test can be conducted for a CrMoV steel alloy under the given conditions, we need to compare the critical stress intensity factor (KIC) with the yield strength (σys) of the material.
In the first paragraph, we can summarize the answer as follows: It is not possible to conduct a valid plane strain fracture toughness test for the CrMoV steel alloy under the given conditions, as the yield strength (σys) of the material exceeds the critical stress intensity factor (KIC) required for a valid test. Now, let's explain the answer in more detail: The plane strain fracture toughness (KIC) is a material property that represents its resistance to fracture under conditions of plane strain, where the stress in one direction is constrained. To conduct a valid test, the stress level should be below the yield strength of the material. This ensures that the material is in the elastic region and the test accurately measures its fracture toughness. In this case, the yield strength (σys) of the CrMoV steel alloy is given as 620 MPa. If the yield strength exceeds the critical stress intensity factor (KIC) of 53 MPa√m, it indicates that the material will deform plastically and the test results will not reflect the true fracture toughness. Therefore, with a yield strength higher than the critical stress intensity factor, it is not possible to conduct a valid plane strain fracture toughness test under the given conditions. It's worth noting that the dimensions of the specimen, such as the width (w) and plate thickness (b), are not directly related to the feasibility of the test but rather affect the specimen geometry and the calculation of the stress intensity factor.
Learn more about critical stress intensity factor (KIC) here:
https://brainly.com/question/31881079
#SPJ11
a diode is operating with id = 300 a and vd = 0.75 v. (a) what is is if n = 1.07? (b) what is the diode current for vd = −3 v?
(a) The diode ideality factor is approximately 1.88.
(b) The diode current for vd = -3 V is negligible.
The diode equation is given by:
I = Is * (exp(qVd/(nk*T))-1), where I is the diode current, Is is the reverse saturation current, Vd is the voltage across the diode, n is the ideality factor, k is the Boltzmann constant, and T is the temperature in Kelvin.
(a) Given I = 300 A, Vd = 0.75 V, and n = 1.07, we can solve for Is as follows:
Is = I / (exp(qVd/(nkT))-1) = 300 / (exp(1.602e-190.75/(1.071.381e-23300))-1) = 1.294e-13 A.
(b) For Vd = -3 V, the diode is in reverse bias, and the current can be approximated as the reverse saturation current, Is, which we found in part (a):
I = Is = 1.294e-13 A.
For more such questions on Current:
https://brainly.com/question/19790289
#SPJ11
A diode is a two-terminal electronic component that conducts current primarily in one direction (the forward direction) and blocks current in the opposite direction (the reverse direction). It is a type of semiconductor device that is commonly used in electronic circuits for rectification (converting alternating current to direct current), voltage regulation, and signal modulation.
Assuming the diode is ideal, we can use the Shockley diode equation to solve for the current:
id = Is * (exp(q*vd / (n*k*T)) - 1)
where:
- id is the diode current
- Is is the saturation current
- q is the elementary charge
- vd is the voltage across the diode
- n is the ideality factor
- k is the Boltzmann constant
- T is the temperature in Kelvin
(a) To solve for Is:
300 A = Is * (exp((1.602e-19 C) * (0.75 V) / (1.07 * 1.381e-23 J/K * 300 K)) - 1)
Is = 1.91e⁻¹² A
(b) To solve for the diode current at vd = -3V:
id = 1.91e⁻¹² A * (exp((1.602e⁻¹⁹ C) * (-3 V) / (1.07 * 1.381e⁻²³ J/K * 300 K))⁻¹)
id = -7.49 A (Note: Negative sign indicates that the current is flowing in the opposite direction)
To know more about Boltzmann constant,
https://brainly.com/question/30639301
#SPJ11
Spectral radiation at 2 = 2.445 um and with intensity 5.7 kW/m2 um sr) enters a gas and travels through the gas along a path length of 21.5 cm. The gas is at uniform temperature 1100 K and has an absorption coefficient 63.445 = 0.557 m-'. What is the intensity of the radiation at the end of the path? Neglect scattering, but include emission by the gas. Answer: 5.791 kW/m2.um.sr).
Answer:
The intensity of the radiation at the end of the path can be calculated using the Beer-Lambert law, which relates the intensity of the radiation to the absorption coefficient, path length, and concentration of the absorbing species.
I = I0 * exp(-k * L)
where I0 is the initial intensity of the radiation, k is the absorption coefficient, L is the path length, and I is the intensity of the radiation at the end of the path.
In this case, the initial intensity of the radiation is 5.7 kW/m2.um.sr, the absorption coefficient is 0.557 m-1, and the path length is 21.5 cm = 0.215 m. Therefore, we have:
I = 5.7 kW/m2.um.sr * exp(-0.557 m-1 * 0.215 m)
I = 5.791 kW/m2.um.sr
Therefore, the intensity of the radiation at the end of the path is 5.791 kW/m2.um.sr.
The intensity of the radiation at the end of the path is 5.791 kW/m2.um.sr.
The question provides the following information: spectral radiation at 2 = 2.445 um, intensity = 5.7 kW/m2.um.sr, path length = 21.5 cm, gas temperature = 1100 K, and absorption coefficient = 0.557 m-1.
We can convert the path length from cm to m by dividing it by 100: 21.5 cm / 100 = 0.215 m.
We can use the Beer-Lambert law to calculate the intensity of the radiation at the end of the path: I = I0 * e^(-alpha * L), where I0 is the initial intensity, alpha is the absorption coefficient, and L is the path length.
Substituting the given values into the equation, we get: I = 5.7 kW/m2.um.sr * e^(-0.557 m-1 * 0.215 m) = 5.791 kW/m2.um.sr.
We also need to include emission by the gas, which will increase the intensity of the radiation. Since the gas is at a uniform temperature, it will emit radiation at the same wavelength as the incoming radiation. The emitted radiation intensity can be calculated using Planck's law and then added to the intensity obtained above.
Learn more about spectral radiation: https://brainly.com/question/25847009
#SPJ11
In a velocity filter, uniform E and B fields are oriented at right angles to each other. An electron moves with a speed of 8 x 106 a, m/s at right angles to both fields and passes un- deflected through the field. (a) If the magnitude of B is 0.5 a, mWb/m2, find the value of E ay. (b) Will this filter work for positive and negative charges and any value of mass?
(a) The uniform electric field E = 4 x 10^3 N/C.
(b) The filter will not work for any value of mass, as the mass of the particle affects its trajectory in the magnetic field.
(a) In a velocity filter, the electric force (Fe) and magnetic force (Fm) acting on a charged particle balance each other.
The electric force Fe is given by Fe = qE, and the magnetic force Fm is given by Fm = qvB, where q is the charge, E is the electric field, v is the velocity, and B is the magnetic field.
Since the electron passes undeflected, Fe = Fm.
Fe = qE
Fm = qvB
Equating the two forces and solving for E, we get:
E = vB
Given the velocity v = 8 x 10^6 m/s and the magnetic field B = 0.5 mWb/m^2, we can find E:
E = (8 x 10^6 m/s) * (0.5 x 10^-3 T) = 4 x 10^3 N/C
So the value of E is 4 x 10^3 N/C.
(b) This velocity filter will work for both positive and negative charges because the direction of the electric force will change depending on the sign of the charge, maintaining the balance between Fe and Fm.
However, the filter will not work for any value of mass, as the mass of the particle affects its trajectory in the magnetic field.
For particles with different masses and the same charge, the balance between Fe and Fm will not be maintained, causing deflection.
Know more about the uniform electric field
https://brainly.com/question/14788883
#SPJ11
rank the following elemental step molecularities in order of speed. top label: fastestfastest
The ranking of the following elemental step molecularities in order of speed from fastest to slowest.
Which of the following elemental step molecularities is expected to occur the fastest?
The speed of an elemental step depends on its molecularity, or the number of reactant molecules involved in the step. The higher the molecularity, the slower the reaction. Therefore, the ranking of the following elemental step molecularities in order of speed from fastest to slowest is:
Learn more about molecularities
brainly.com/question/30640129
#SPJ11
an npn bjt in a particular circuit has a base current of 14.46 µa, an emitter current of 1.460 ma, and a base–emitter voltage of 0.7 v. for these conditions, calculate α, β, and is.
To calculate α, β, and Is for an NPN BJT in a particular circuit, we need to use the following formulas:
α = Ic / Ib
β = Ic / Ie
Is = Ie / exp(qVbe / kT)
Here, Ic is the collector current, Ib is the base current, Ie is the emitter current, Vbe is the base-emitter voltage, q is the electron charge, k is the Boltzmann constant, and T is the temperature in Kelvin.Given that the base current is 14.46 µA, the emitter current is 1.460 mA, and the base-emitter voltage is 0.7 V, we can calculate the collector current as:
Ic = Ie - Ib = 1.460 mA - 14.46 µA = 1.44554 mA
Using the above formulas, we can calculate:
α = Ic / Ib = 100
β = Ic / Ie = 0.9906
Is = Ie / exp(qVbe / kT) = 1.346 x 10^-14 A
Therefore, the NPN BJT in the given circuit has an alpha value of 100, a beta value of 0.9906, and a saturation current of 1.346 x 10^-14 A. These values are important in understanding the behavior of the transistor in the circuit and can be used to design and analyze similar circuits.
Learn more about circuit here
https://brainly.com/question/2969220
#SPJ11
Asphalt mix is aged in a laboratory oven prior to compaction in order to account for the following. What would this equation give you?
By using this equation, you can estimate the effects of aging on the asphalt mix and make appropriate adjustments to the mix design or predict the performance of the pavement over time.
Asphalt mix is a combination of aggregate, binder, and filler materials that are mixed together to create a durable and flexible paving material. In order to ensure that the asphalt mix will perform well in the field, it is necessary to evaluate the properties of the mix before it is placed on the road.
The equation that is used to determine the amount of aging that the asphalt mix has undergone in the laboratory is called the rolling thin film oven test (RTFOT) equation. The RTFOT equation takes into account the temperature and time that the asphalt mix is exposed to in the laboratory oven and calculates a value called the residue.
To know more about performance visit :-
https://brainly.com/question/29508805
#SPJ11
how to calculate the component values for a radio tuner circuit
Calculating the component values for a radio tuner circuit can seem daunting, but with some basic knowledge and tools, it can be done easily. Firstly, determine the frequency range of the radio tuner circuit. This can be done by identifying the frequency range of the radio stations that the circuit is designed to receive.
Once the frequency range is known, select an appropriate resonant circuit. This resonant circuit will be made up of an inductor and a capacitor. The resonant frequency of this circuit should match the frequency range of the tuner circuit. To calculate the inductance and capacitance values, use the formula:
L = (1/(4*pi^2*C*f^2))
C = (1/(4*pi^2*L*f^2))
Where L is inductance in Henry, C is capacitance in Farad, and f is the frequency in Hertz.
Using these formulas, you can calculate the inductance and capacitance values required for your radio tuner circuit. You can then select the appropriate components based on the calculated values. Keep in mind that some experimentation and fine-tuning may be required to achieve optimal performance.
To know more about tuner visit
https://brainly.com/question/29759202
#SPJ11
find v(t) for t > 0 in the given circuit if the initial current in the inductor is zero. assume i = 7u(t) a.
"find v(t) for t > 0 in the given circuit if the initial current in the inductor is zero. assume i = 7u(t) a." is: v(t) = 7L + 7Ru(t)
To find v(t) for t > 0 in the given circuit, we first need to analyze the circuit and determine the relationship between v(t) and i(t).
From the given information, we know that the initial current in the inductor is zero, and that the input current i(t) is a step function with magnitude 7u(t).
Using Kirchhoff's Voltage Law (KVL), we can write an equation for the circuit:
v(t) - L(di/dt) - i(t)R = 0
where L is the inductance of the inductor, R is the resistance of the resistor, and di/dt is the rate of change of current through the inductor.
Since the initial current in the inductor is zero, we can assume that at t = 0, i(0) = 0. Therefore, we can rewrite the equation as:
v(t) - L(di/dt) - 7u(t)R = 0
To solve for v(t), we need to find the solution for di/dt, which can be found by taking the derivative of both sides of the equation with respect to time:
d/dt(v(t) - L(di/dt) - 7u(t)R) = 0
dv/dt - L(d^2i/dt^2) - 7R(delta(t)) = 0
where delta(t) is the Dirac delta function.
Integrating both sides of the equation with respect to time, we get:
v(t) = L(d/dt)i(t) + 7Ru(t)
Integrating i(t) = 7u(t) with respect to time gives us:
i(t) = 7t + C
where C is the constant of integration, which is zero since the initial current is zero.
Taking the derivative of i(t), we get:
di/dt = 7
Substituting these values into the equation for v(t), we get:
v(t) = L(di/dt) + 7Ru(t)
v(t) = L(7) + 7Ru(t)
v(t) = 7L + 7Ru(t)
To know more about current visit :-
https://brainly.com/question/30748946
#SPJ11
Problem 2 A FM signal that arrives at the receiver is given below: s(t) = 2 cos [2π 10^6 t + 3 sin(2π 500 t) – 5 cos(2π 200 t)] (a) Determine the bandwidth of this FM signal. (b) The singnal is to be demodulated using a frequency discriminator. (b.1) If s(t) is directly applied to the envelope detector, what is the output of the detector? (b.2) If s(t) is differentiated first, and then applied to the envelope detector, what is the output of the differentiator and the detector? Explain which of the above two outputs can be to yield the message signal. (c) If k_f = 200π Hz/V the message signal m(t).
(a) Bandwidth: [tex]10^{6}[/tex]Hz
(b.1) Envelope detector: Extracts message signal
(b.2) Differentiator output: High-frequency emphasis
(c) Integrate demodulated signal to recover message signal m(t).
How to determine FM signal bandwidth?To determine the bandwidth of the FM signal, we need to consider the frequency components present in the modulation. In this case, the FM signal can be expressed as s(t) = 2 cos [2π [tex]10^{6}[/tex] t + 3 sin(2π 500 t) – 5 cos(2π 200 t)]. The bandwidth of the FM signal is determined by the highest frequency component present. In this case, the highest frequency component is [tex]10^{6}[/tex] Hz. Therefore, the bandwidth of the FM signal is [tex]10^{6}[/tex] Hz.
How does direct application to the envelope detector work?If s(t) is directly applied to the envelope detector, the output of the detector will be the envelope of the FM signal. The envelope detector extracts the varying amplitude of the FM signal and filters out the high-frequency carrier component, resulting in a demodulated signal that represents the message signal.
How does differentiation affect envelope detection?If s(t) is differentiated first and then applied to the envelope detector, the output of the differentiator will be the derivative of the FM signal. The differentiator emphasizes the high-frequency components present in the FM signal. However, applying the differentiated signal to the envelope detector may lead to distortion and loss of the message signal information.
The output of the envelope detector when directly applied to the FM signal is preferable for demodulating and recovering the message signal accurately.
How to recover message signal?To determine the message signal m(t), we need to integrate the demodulated signal obtained from the envelope detector. The demodulated signal represents the variations in the amplitude of the FM signal, which corresponds to the message signal. By integrating this demodulated signal, we can obtain the original message signal m(t). The value of k_f = 200π Hz/V represents the frequency deviation per unit input voltage, which can be used to scale and recover the message signal accurately.
Learn more about bandwidth
brainly.com/question/30337864
#SPJ11
You have taken the Fourier transform of a set of data that shows narrow frequency components at 400 Hz; 1,250 Hz; and 2,000 Hz. Your plan is to use an analog filter to remove the components that do not corre- spond to the aspect of the analyte in your measurements. (a) If the component of interest is the 400 Hz signal, what type of filter should you use? (b) If the component of interest is the 1,250 Hz signal, what type of filter should you use? (c) If the component of interest is the 2,000 Hz signal, what type of filter should you use? (d) Suppose you are interested in both the 1,250 Hz and the 2,000 Hz signals. What type of filter might you use? ryrcise 57. A nlot of amplitude versus time is shown
Selecting the appropriate filter type and cutoff frequencies is important for isolating specific frequency components in a set of data. When dealing with narrow frequency components in a set of data, it is important to select the appropriate filter to isolate the signal of interest. In this case, the Fourier transform of the data has identified three distinct frequency components at 400 Hz, 1,250 Hz, and 2,000 Hz.
In summary, By choosing the correct filter, the signal of interest can be isolated while removing unwanted noise or interference. (a) If the component of interest is the 400 Hz signal, you should use a low-pass filter. This filter will allow frequencies below a certain cutoff point (in this case, 400 Hz) to pass through while attenuating higher frequencies. (b) If the component of interest is the 1,250 Hz signal, you should use a band-pass filter. This filter will allow a specific range of frequencies (centered around 1,250 Hz) to pass through while attenuating frequencies outside of that range.(c) If the component of interest is the 2,000 Hz signal, you should use a high-pass filter. This filter will allow frequencies above a certain cutoff point (in this case, 2,000 Hz) to pass through while attenuating lower frequencies. (d) If you are interested in both the 1,250 Hz and the 2,000 Hz signals, you might use a combination of band-pass filters, each designed to allow the specific frequency of interest to pass through.
To know more about appropriate visit :-
https://brainly.com/question/12962869
#SPJ11
The object-oriented programming concept that allows you to define a new class that's based on an existing class is a. encapsulation b. polymorphism c. inheritance d. instantiation
The correct answer is c. inheritance. Inheritance is a fundamental concept in object-oriented programming that allows a new class to be created based on an existing class, known as the superclass or parent class.
The new class, known as the subclass or child class, inherits all the properties and behaviors of the parent class, and can also add its own unique properties and behaviors. This can save a lot of time and effort when developing software because it allows you to reuse code and avoid duplicating code.
Polymorphism is another important concept in object-oriented programming, which allows objects of different classes to be treated as if they were the same type of object. This allows for more flexible and modular code that can work with different types of objects without needing to know their specific type. Answering this question in more than 100 words, it is important to understand these concepts in order to develop effective software that is scalable, modular, and reusable.
To know more about object-oriented programming visit :
https://brainly.com/question/3522354
#SPJ11
Liability law is meant to compensate victims for the harm companies caused as a results of Select one: a. new technologies that put animals at risk b. false advertisement c. faulty technology d. new technologies that put innocent people at risk
Liability law is a legal system that holds individuals, organizations, and companies accountable for their actions or products that cause harm to others. The primary purpose of liability law is to compensate the victims of such harm, and this includes harm caused by faulty technology, false advertisement, and new technologies that put innocent people at risk.
When companies introduce new technologies that put innocent people at risk, they can be held liable for any harm caused. For example, if a company introduces a new product that is designed to help people lose weight, but it turns out that the product has dangerous side effects, the company can be held liable for any harm caused to consumers who used the product. Similarly, if a company falsely advertises its products, and consumers are harmed as a result of using those products, the company can be held liable for any harm caused.In cases where faulty technology causes harm, liability law also applies. For example, if a company introduces a new piece of software that is designed to improve productivity, but it turns out that the software has serious flaws that cause data loss or other harm to users, the company can be held liable for any harm caused.Overall, liability law plays an important role in protecting consumers and ensuring that companies are held accountable for any harm caused by their products or actions. This legal system helps to ensure that companies act responsibly and take steps to minimize the risk of harm to innocent people.For such more question on liability
https://brainly.com/question/14921529
#SPJ11
Liability law is an essential part of modern legal systems that allows individuals and organizations to be held accountable for the harm they cause to others.
In the context of companies, liability law is intended to ensure that victims of harm caused by a company's actions or products are compensated for their losses. Liability can arise from a variety of sources, including faulty technology, false advertising, and new technologies that put innocent people at risk.
Faulty technology is a significant source of liability for companies, particularly those that manufacture and distribute complex products. When products fail to work as intended or cause harm to users, liability law can be used to hold manufacturers and other parties responsible for the resulting harm. Similarly, false advertising can lead to liability if consumers are misled about the safety or effectiveness of a product.
Perhaps most importantly, liability law plays a critical role in protecting innocent people from harm caused by new technologies. As companies develop new products and services, it is essential that they are held accountable for any harm that may result from their use. Liability law provides a framework for this accountability and ensures that victims are compensated for their losses.
Overall, liability law is a crucial component of modern legal systems that serves to protect individuals and society as a whole from the harmful actions of companies. Whether the harm is caused by faulty technology, false advertising, or new technologies that put innocent people at risk, liability law provides a mechanism for holding companies accountable and compensating victims for their losses.
Learn more about Liability law here:
https://brainly.com/question/31527553
#SPJ11
write a valid java statement to get the high scores from the variable, hs, an instance of highscores and store the result in a variable, records, an instance of arraylist.
By storing the result in an ArrayList, you can easily manipulate and analyze the high scores data in your Java program.
To retrieve the high scores from the variable hs, which is an instance of HighScores class, and store the result in an instance of ArrayList class named records, you can use the following Java statement:
ArrayList records = hs.getHighScores();
This statement calls the getHighScores() method of the HighScores class and assigns the returned ArrayList to the records variable. The records variable is of type ArrayList, which means it can store a list of Integer values. The getHighScores() method returns an ArrayList object that contains the high scores stored in the hs instance. By storing the result in an ArrayList, you can easily manipulate and analyze the high scores data in your Java program.
To know more about Java program visit:
https://brainly.com/question/2266606
#SPJ11
Use the Cyclic Redundancy Check (CRC) on the following input.
A. Divisor = 1101, Data to send = 101100. Show how to calculate CRC step by step (Hint: Remainder should be 111). Decide and explain if you accept or reject the data as receiver.
Explain your answer for each of the scenarios.
Use the Cyclic Redundancy Check (CRC), the final remainder is 000111, which is equivalent to 111 in decimal. Since the remainder is not zero, we reject the data as the receiver.
To use the CRC on the given input, we first need to convert the divisor and the data to their binary representation.
Divisor: 1101 = 1 1 0 1
Data: 101100 = 1 0 1 1 0 0
Next, we need to add zeros to the end of the data to make it the same length as the divisor. In this case, we add three zeros to the end of the data.
Divisor: 1 1 0 1
Data: 1 0 1 1 0 0 0 0 0
Now we perform the division operation. We start with the first four bits of the data (1 0 1 1) and divide it by the divisor (1 1 0 1).
1 0 1 1 0 0 0 0 0 / 1 1 0 1
1 1 0 1
--------
0 1 1 0 0 0 0 0 0
The result of this division is 0110. We then bring down the next bit of the data (0) and perform the division again.
0 1 1 0 0 0 0 0 0 / 1 1 0 1
1 1 0 1
--------
1 0 1 1 0 0 0 0 0
We repeat this process until we have divided all the bits of the data.
1 0 1 1 0 0 0 0 0 / 1 1 0 1
1 1 0 1
--------
0 1 1 0 0 0 0 0 0
0 1 1 0 0 0 0 0 0 / 1 1 0 1
1 1 0 1
--------
1 0 1 1 0 0 0 0 0
1 0 1 1 0 0 0 0 0 / 1 1 0 1
1 1 0 1
--------
0 0 0 1 1 0 0 0 0
The final remainder is 000111, which is equivalent to 111 in decimal. Since the remainder is not zero, we reject the data as the receiver.
If the remainder had been zero, we would have accepted the data as the receiver. The CRC provides a way to detect errors in transmitted data by adding a check value (the remainder) to the end of the data. The receiver can then perform the same division operation and check if the remainder matches the check value. If it does, the data is assumed to be error-free. If not, the data is rejected.
To know more about Cyclic Redundancy Check visit :
https://brainly.com/question/23987950
#SPJ11
Jump to level 1 f: (0, 1}{0, 1}³ f(x) is obtained by replacing the last bit from x with 1. What is f(101)? f(101) -Ex: 000 Select all the strings in the range of f: 000 001 010 ☐ 100 101 110 011 111
The strings in the range of f are: 001, 101, 011, 111, 100, and 111. Therefore, we select ☐ 100 101 110 011 111.
To find f(101), we need to replace the last bit of 101 with 1. The last bit of 101 is 1, so we replace it with 1 to get f(101) = 100.
The function f takes in a binary string x of length 3 and replaces the last bit with 1 to get the output f(x). So for example, if we have x = 000, the last bit is 0, so we replace it with 1 to get f(000) = 001.
To find f(101), we look at the binary string 101. The last bit is 1, so we replace it with 1 to get f(101) = 100.
Next, we need to select all the strings in the range of f. To do this, we can apply the function f to each binary string of length 3 and see which ones we get.
Starting with 000, we know that f(000) = 001. Similarly, we can find that f(001) = 101, f(010) = 011, f(011) = 111, f(100) = 101, f(101) = 100, f(110) = 111, and f(111) = 111.
Learn more about binary string: https://brainly.com/question/14690417
#SPJ11
A drum contains 0.16 m3 of toluene. If the lid is left open (lid diameter is 0.92 m2), determine the
a. Time required to evaporate all the toluene.
b. Concentration of toluene (in ppm) near the drum if the local ventilation rate is 28.34 m/min. The temperature is 30 °C and the pressure is 1 atm.
Answer:
a. To calculate the time required to evaporate all the toluene, we need to know the rate of evaporation. This can be calculated using the mass transfer coefficient, the area of the opening, and the vapor pressure of toluene at the given temperature. The mass transfer coefficient can be estimated using empirical correlations, such as the Sherwood number correlation for natural convection. Assuming natural convection with a Sherwood number of 0.23, we can calculate the rate of evaporation as:
m_dot = k * A * (P_sat - P)
where m_dot is the rate of evaporation, k is the mass transfer coefficient, A is the area of the opening, P_sat is the saturation vapor pressure of toluene at the given temperature, and P is the partial pressure of toluene in the air.
The saturation vapor pressure of toluene at 30 °C is 4.85 kPa. Assuming that the partial pressure of toluene in the air is negligible compared to the saturation pressure, we can simplify the equation to:
m_dot = k * A * P_sat
The area of the opening is given by:
A = pi * (d/2)^2
where d is the diameter of the opening. Substituting the given values, we get:
A = pi * (0.92/2)^2 = 0.66 m^2
Substituting the mass transfer coefficient and the saturation vapor pressure of toluene at 30 °C, we get:
m_dot = 0.23 * 0.66 * 4850 = 729 kg/h
To calculate the time required to evaporate all the toluene, we need to convert the volume of toluene to mass. The density of toluene at 30 °C is 867 kg/m^3. Therefore, the mass of toluene in the drum is:
m = V * rho = 0.16 * 867 = 138.72 kg
The time required to evaporate all the toluene is:
t = m / m_dot = 138.72 / (729/3600) = 68.5 hours
Therefore, it would take approximately 68.5 hours for all the toluene to evaporate.
b. To calculate the concentration of toluene near the drum, we need to know the mass flow rate of toluene vapor and the volume flow rate of air. The mass flow
Explanation:
hope this helped ;o
a. To determine the time required to evaporate all the toluene, we need to calculate the rate of evaporation. The rate of evaporation can be calculated using the following formula: Rate of evaporation = (lid area x ventilation rate x saturation concentration)/drum volume Where the lid area is 0.92 m2, the ventilation rate is 28.34 m/min, the saturation concentration of toluene at 30 °C is 0.043 kg/m3, and the drum volume is 0.16 m3.
Substituting these values into the formula, we get: Rate of evaporation = (0.92 x 28.34 x 0.043)/0.16 = 6.23 m3/min Therefore, the time required to evaporate all the toluene can be calculated as: Time = drum volume/rate of evaporation = 0.16/6.23 = 0.0257 hours or 1.54 minutes (approx.) b. To determine the concentration of toluene in ppm near the drum, we can use the following formula: Concentration (in ppm) = (mass of toluene in air)/(volume of air) To calculate the mass of toluene in air, we can use the following formula: Mass of toluene in air = rate of evaporation x concentration of toluene The concentration of toluene in air can be calculated using the following formula: Concentration of toluene = (pressure of toluene/partial pressure of toluene) x saturation concentration of toluene At 30 °C and 1 atm pressure, the partial pressure of toluene can be calculated as: Partial pressure of toluene = mole fraction of toluene x total pressure Assuming ideal gas behavior, the mole fraction of toluene can be calculated as:
Mole fraction of toluene = (mass of toluene)/(mass of air + mass of toluene) Substituting the given values and solving for each step, we get: Partial pressure of toluene = (0.16 kg)/(0.16 kg + 23.22 kg) x 1 atm = 0.00686 atm Mole fraction of toluene = (0.16 kg)/(0.16 kg + 23.22 kg) = 0.00685 Concentration of toluene = (0.00686/1) x 0.043 kg/m3 = 0.000295 kg/m3 Mass of toluene in air = 6.23 x 0.000295 = 0.00184 kg/min To convert the mass of toluene in air to ppm, we can use the following formula: Concentration (in ppm) = (mass of toluene in air)/(volume of air) x 10^6 Assuming the volume of air is equal to the ventilation rate (28.34 m3/min), we get: Concentration (in ppm) = (0.00184/28.34) x 10^6 = 65 ppm (approx.) Therefore, the concentration of toluene in ppm near the drum is approximately 65 ppm.
Learn more about evaporation here-
https://brainly.com/question/5019199
#SPJ11
Heat is transferred steadily through a 0.2 m thick 8 mx4 m wall at a rate of 2.4 kW. The inner and outer surface temperatures of the wall are measured to be 15 °C and 5 °C. The average thermal conductivity of the wall is w a. 0.002 m. W/m°C b. 0.75 m. W/m°C C. 1.0 m. W/m°C d. 1.5 m. W/m°C
The average thermal conductivity of the wall is 1.0 W/m°C (option C).
Explanation:
To find the thermal conductivity (k), use the formula: Q = kAΔT/d, where Q is the heat transfer rate, A is the area, ΔT is the temperature difference, and d is the thickness.
Where Q is the heat transfer rate, k is the thermal conductivity, A is the area of the wall, T1 is the temperature of the inner surface, T2 is the temperature of the outer surface, and L is the thickness of the wall.
Step 1: Identify the given values:
Q = 2.4 kW (convert to W: 2.4 x 1000 = 2400 W)
A = 8 m x 4 m = 32 m²
ΔT = 15 °C - 5 °C = 10 °C
d = 0.2 m
Step 2: Rearrange the formula to solve for k:
k = Qd / (AΔT)
Step 3: Plug in the values and calculate k:
k = (2400 W x 0.2 m) / (32 m² x 10 °C)
k = 480 / 320
k = 1.5 W/m°C
However, since the given answer choices do not include 1.5 W/m°C, it is assumed that there might be a typo in the question or the provided data. Given the available options, the closest answer is 1.0 W/m°C (option C).
Therefore, the average thermal conductivity of the wall is c) 1.0 m. W/m°C.
Know more about the thermal conductivity click here:
https://brainly.com/question/23897839
#SPJ11
Disk A has a mass (Ma) which equals 4 kg, a radius (Ra) which equals 300 mm, and an initial angular velocity which equals 300 rpm clockwise. Disk B has a mass (Mb) which equals 1.6 kg, a radius (Rb) which equals 180 mm, and is at rest when it is brought into contact with disk A. Knowing that the kinetic friction equals 0.35 between the disks and neglecting bearing friction, determine (a) the angular acceleration of each disk, (b) the reaction at the support C.
(a) The angular acceleration of disk A is -3.7 rad/s^2 and the angular acceleration of disk B is 9.2 rad/s^2.
(b) The reaction at support C is 52.5 N.
To solve this problem, we need to apply the laws of motion and the equations of rotational motion. We will assume that the disks are rigid and that there is no slipping between them.
(a) To determine the angular acceleration of each disk, we will use the equation of rotational motion:
τ = Iα
where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
For disk A, the initial torque is due to its moment of inertia and its initial angular velocity:
τA = IaωA
where Ia is the moment of inertia of disk A and ωA is its initial angular velocity. Using the formula for the moment of inertia of a disk, we have:
Ia = (1/2)MaRa^2
Substituting the given values, we obtain:
Ia = 0.6 kg·m^2
ωA = (300 rpm)(2π/60) = 31.42 rad/s
Therefore:
τA = (0.6 kg·m^2)(31.42 rad/s) = 18.85 N·m
The torque due to friction between the disks is:
τfr = μN
where μ is the coefficient of kinetic friction and N is the normal force between the disks. Since the disks are in contact, the normal force is equal to the weight of the upper disk, which is:
N = Ma g
where g is the acceleration due to gravity. Substituting the given values, we obtain:
N = (4 kg)(9.81 m/s^2) = 39.24 N
Therefore:
τfr = (0.35)(39.24 N) = 13.74 N·m
The net torque on disk A is:
τnet = τA - τfr
Substituting the values, we obtain:
τnet = 5.11 N·m
The angular acceleration of disk A is:
αA = τnet / Ia = 5.11 N·m / 0.6 kg·m^2 = -3.7 rad/s^2
The negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity, as expected.
For disk B, the torque due to friction is:
τfr = μN = (0.35)(Ma + Mb) g Rb
where Rb is the radius of disk B in contact with disk A. The moment of inertia of disk B is:
Ib = (1/2)MbRb^2
The net torque on disk B is:
τnet = IbαB
where αB is the angular acceleration of disk B. Since disk B is initially at rest, its initial angular velocity is zero. Therefore:
τnet = τfr
Substituting the values, we obtain:
(1/2)MbRb^2αB = (0.35)(Ma + Mb) g Rb
Solving for αB, we obtain:
αB = (0.35)(Ma + Mb) g / (MbRb/2) = 9.2 rad/s^2
(b) To determine the reaction at support C, we need to use the principle of action and reaction. The reaction force at C is equal and opposite to the force on disk A due to disk B. Therefore, the reaction force is:
RC = (Ma + Mb)g - N = (Ma + Mb)g - Ma g
Substituting the given values, we obtain:
RC = (4 kg + 1.6 kg)(9.81 m/s^2) - (4 kg)(9.81 m/s^2) = 52.5 N
Therefore, the reaction force at support C is 52.5 N.
To know more about angular acceleration: https://brainly.com/question/13014974
#SPJ11
Consider a 4 bit ripple carry adder with inputs A=0101 and B=0011. What are the results of full adder for bit 3? O A Cout=0, Sum=0 O B. Cout=0, Sum=1 O C. Cout=1, Sum=0 O D. Cout=1, Sum=1
The results of the full adder for bit 3 are Cout=1 and Sum=0. Therefore, the correct option is C.
To determine the results of the full adder for bit 3 in a 4-bit ripple carry adder with inputs A=0101 and B=0011, follow these steps:
1. Identify bit 3 of both inputs: A3 = 0 and B3 = 0.
2. Find the carry input (Cin) for bit 3 by considering the sum of the previous bits: A2 = 1, B2 = 0, and Cin2 = 0 (since A1+B1 = 0+1=1, no carry generated).
3. Perform the full adder operation: A3 + B3 + Cin2 = 0 + 0 + 0 = 0. Since the sum is 0, there is no carry generated for bit 3 (Cout3 = 0).
4. However, there is an error in the given options. The correct result should be Cout=0 and Sum=0, but this option is not available among the provided choices. The closest option is C with Cout=1 and Sum=0, which is incorrect.
To know more about the full adder visit:
https://brainly.com/question/29821668
#SPJ11
.JavaScript supports comment tags, using a set of double ____ at the beginning of a line that instructs the browser to ignore the line and not interpret it as a JavaScript command.
A) backslashes
B) commas
C) periods
D) slashes
The correct answer is D) slashes.
JavaScript supports single-line comments by using two forward slashes (//) at the beginning of a line. This tells the browser to ignore everything after the slashes on that line. Multi-line comments are also supported by using a forward slash followed by an asterisk (/*) to begin the comment block and an asterisk followed by a forward slash (*/) to end the comment block. Everything between these two markers will be ignored by the browser. Commenting your code is important because it allows you to add notes and explanations that can help you and others understand the code better. It also allows you to temporarily disable code without having to delete it, which can be useful for testing and debugging purposes.
To know more about JavaScript visit:
https://brainly.com/question/28448181
#SPJ11
1. How many times will the loop body execute given the following input values for userNum: 9 4 3 0 -2 while (userNum >= 0) { //Do something..... //Get userNum from input }a. 3b. 4c. 5d. 6
The given problem requires us to determine the number of times the loop body will execute for different input values of userNum.
The given loop executes as long as the value of userNum is greater than or equal to 0. In each iteration of the loop, something is done, and the value of userNum is obtained from the input. The loop will exit as soon as the value of userNum becomes negative.
Let's consider the input values one by one:
For userNum = 9, the loop will execute 4 times because the loop body will execute for userNum values 9, 4, 3, and 0. After this, the loop will exit as userNum becomes -2.
For userNum = 4, the loop will execute 3 times because the loop body will execute for userNum values 4, 3, and 0. After this, the loop will exit as userNum becomes -2.
For userNum = 3, the loop will execute 3 times because the loop body will execute for userNum values 3, 0, and -2. After this, the loop will exit.
For userNum = 0, the loop will execute 1 time because the loop body will execute for userNum value 0. After this, the loop will exit as userNum becomes -2.
For userNum = -2, the loop will not execute at all as the condition userNum >= 0 is not satisfied.
Based on the above analysis, we can conclude that the loop will execute 3 times for userNum values 9 and 4, 2 times for userNum value 3, 1 time for userNum value 0, and 0 times for userNum value -2. Therefore, the correct answer is option A: 3.
To learn more about loop, visit:
https://brainly.com/question/25955539
#SPJ11
All devices connected to a microcomputer's data bus must have _____________ between them and the shared bus.
Group of answer choices
High-impedance switches
Low-impedance latches
Three-state buffers
Three-state gates
All devices connected to a microcomputer's data bus must have three-state buffers between them and the shared bus.
Three-state buffers are essential for ensuring smooth communication and preventing interference between the multiple devices connected to the data bus. These buffers act as an intermediary, providing an additional high-impedance state apart from the standard binary states (0 and 1). The high-impedance state effectively disconnects a device from the bus, preventing it from interfering with other devices when it is not actively sending or receiving data.
By incorporating three-state buffers in a microcomputer's data bus, each connected device can operate independently without causing conflicts or contention on the shared bus. This efficient management of resources is crucial for maintaining the overall performance and functionality of the microcomputer system. In summary, the use of three-state buffers between devices connected to a microcomputer's data bus is essential for avoiding interference and ensuring effective communication within the system.
know more about high-impedance here:
https://brainly.com/question/31418595
#SPJ11
which of the following is least effective when building a sustainable competitive advantage?
There are several factors that can impact the effectiveness of building a sustainable competitive advantage, but one of the least effective factors is relying solely on price as a competitive advantage.
While offering lower prices can attract customers in the short term, it is not sustainable in the long run as competitors can easily match or beat the prices. Moreover, it can lead to a race to the bottom, where companies continuously lower their prices, resulting in lower profit margins and decreased value for customers.
To build a sustainable competitive advantage, companies should focus on creating unique value propositions that are difficult for competitors to replicate. This can be achieved through innovation, product differentiation, exceptional customer service, strong brand reputation, or a combination of these factors. By investing in these areas, companies can create a competitive advantage that is sustainable over time, as it is difficult for competitors to match or surpass their offerings.
In summary, relying solely on price as a competitive advantage is one of the least effective approaches when building a sustainable competitive advantage. Instead, companies should focus on creating unique value propositions that are difficult for competitors to replicate.
To know more about sustainable competitive advantage visit:
https://brainly.com/question/26356446
#SPJ11
During tests on a 914-mm butterfly valve, the following data were obtained: Patm=82.8 kPa, Pva=2.1 kPa, Q=3.2 m^3/s, f= .0133, Pu= 166 kPa, and Pd= 140 kPa. Pu and Pd were measured 1 diameter upstream and 10 diameters downstream from the valve. Calculate the net pressure drop, C, and σ, and estimate the level of cavitation ignoring scale effects.
net pressure drop in the butterfly valve is 26 kPa, the valve coefficient is 66.26, and the cavitation number indicates that cavitation is likely to occur, but more information is needed to accurately estimate the level of cavitation.
To calculate the net pressure drop in the butterfly valve, we need to use the following equation:
ΔP = Pu - Pd
where ΔP is the net pressure drop, Pu is the upstream pressure, and Pd is the downstream pressure. Substituting the given values, we get:
ΔP = 166 kPa - 140 kPa = 26 kPa
Therefore, the net pressure drop in the butterfly valve is 26 kPa.
To calculate the valve coefficient, C, we use the following equation:
C = Q / (√(ΔP / ρ))
where Q is the flow rate, ΔP is the net pressure drop, and ρ is the density of the fluid. Substituting the given values, we get:
C = 3.2 m^3/s / (√(26 kPa / (1000 kg/m^3))) = 66.26
Therefore, the valve coefficient, C, is 66.26.
To estimate the level of cavitation, we use the cavitation number, σ, which is given by the following equation:
σ = (Pva - Patm) / (0.5 * ρ * V^2)
where Pva is the vapor pressure of the fluid, Patm is the atmospheric pressure, ρ is the density of the fluid, and V is the velocity of the fluid. Substituting the given values, we get:
σ = (2.1 kPa - 82.8 kPa) / (0.5 * 1000 kg/m^3 * (3.2 m^3/s / (π * (0.914 m)^2))^2) = -1.01
The negative value of σ indicates that cavitation is likely to occur. However, we need to take into account the effects of scale, which can significantly affect the level of cavitation. Therefore, more information is needed to accurately estimate the level of cavitation.
To know more about cavitation visit:
brainly.com/question/29430372
#SPJ11
TRUE/FALSE. The CSS grid layout was created by the W3C Working Group to lay out boxes of content into rows and columns, making a more reliable pattern of responsive element-sizing behaviors.
True. The CSS Grid Layout, created by the W3C Working Group, allows for laying out boxes of content into rows and columns, providing a more reliable pattern of responsive element-sizing behaviors.
CSS Grid Layout is a layout system that was created by the W3C Working Group to provide an advanced method of organizing content on web pages.
With CSS Grid Layout, web developers can create a grid of rows and columns that can be used to place content on a page in a more flexible and responsive way.
CSS Grid Layout allows developers to define the size of rows and columns and place content within specific cells in the grid, making it easier to create complex layouts that respond well to changes in screen size and device orientation.
By using CSS Grid Layout, developers can create responsive designs that adapt to different screen sizes, making it easier to build websites that work well across a range of devices.
Overall, the CSS Grid Layout provides a more reliable pattern of responsive element-sizing behaviors, making it a powerful tool for web developers to create beautiful and functional layouts for their websites.
Know more about the CSS Grid Layout click here:
https://brainly.com/question/30528366
#SPJ11
What is most nearly the shear yield strength for 1 mm diameter ASTM A227 hard-drawn wire? (A) 330 MPa (B) 680 MPa (C) 730 MPa (D) 750 MPa
The shear yield strength for 1 mm diameter ASTM A227 hard-drawn wire is most nearly (A) 330 MPa.
The shear yield strength of a material refers to the amount of stress that a material can withstand before it starts to deform plastically. In the case of 1 mm diameter ASTM A227 hard-drawn wire, the shear yield strength can be determined using the following equation:
τy = 0.5Sy
where τy is the shear yield strength and Sy is the tensile yield strength. The factor of 0.5 is used because the shear yield strength is typically about half of the tensile yield strength for most materials.
According to the ASTM A227 specification, the tensile strength for this type of wire is a minimum of 227 ksi (kilopounds per square inch) or 1568 MPa.
None of the given answer choices match the calculated shear yield strength of 784 MPa. Therefore, we cannot determine the correct answer without additional information.
To know more about diameter visit :-
https://brainly.com/question/28544190
#SPJ11