The Association policy is primary and the Unit-Owners form is excess when both the Condominium Association and Condominium Unit-Owners forms apply to a loss.
Simply described, a condominium association is a collection of property owners that work together to uphold neighbourhood norms and property values. A mandatory association membership fee must be paid in order to purchase a unit in the development. The covenants, conditions, and restrictions (CC&Rs) of the community must be adhered to, and the fees specified in those agreements must be paid by homeowners who hold this membership. You can join a condominium association, much like a club. You make a commitment to follow the set rules and regulations when you buy a condominium. Each unit owner in a condominium, which is frequently associated housing, also owns a share of the neighbouring privately owned property.
To learn more Condominium refer here:
https://brainly.com/question/28207280
#SPJ4
Access the March 23, 2017, filing of the 10-K report of Home Depot for the year ended January 29, 2017, from SEC.gov (ticker: HD). Refer to Home Depot's balance sheet, including its note 4 (on debt).
1. Identify Home Depot's long-term liabilities and the amounts for those liabilities from Home Depot's balance sheet at January 29, 2017.
2. Review Home Depot's note 4. The note reports that as of January 29, 2017, it had $2.947 billion of "5.875% Senior Notes; due December 16, 2036; interest payable semiannually on June 16 and December 16." These notes have a face value of $3.0 billion and were originally issued at $2.958 billion.
a. Why would Home Depot issue $3.0 billion of its notes for only $2.958 billion?
b. How much cash interest must Home Depot pay each June 16 and December 16 on these notes?
Because interest notes of comparable notes with comparable risk and must have a higher interest rate than 5.875%, Home Depot issued $3 billion of its notes for just $2,958 billion.
The required details for interest rate in given paragraph
The interest rate is the amount of interest payable over a period of time in relation to the amount borrowed, deposited or borrowed (referred to as principal). The total interest on the amount borrowed or borrowed depends on the principal amount, the interest rate, how often it is lent, deposited or borrowed. The effective total interest rate is the interest rate over a period of one year. Other interest rates apply for other periods, e.g. a month or a day, but are usually annual.
The interest rate has been called the "preference indicator" for a dollar of current [income] instead of a dollar of future income.” The borrower wants or needs money ASAP and is willing to pay a fee – the interest rate – for the privilege.
To know about interest rate click here
https://brainly.com/question/25816355
#SPJ4
Suppose that marginal product tripled while product price fell by one-half in the table below. What would be the new values in the table? What would be the net mpact on the location of the resource demend curve given below?
When a corporation adds one single labor unit while maintaining constant production variables, its overall output increases (marginal product of labor, or MPL).
Does the mean change marginally?The phrase "marginal change" is used by economists to describe minor modifications to an existing course of action. Simply put, marginal adjustments are very modest incremental adjustments that only have an overall impact on the bigger (macroeconomic) totals.
How are marginal values determined?The additional costs spent by manufacturing more units of an item or service are known as marginal costs. By dividing the overall variation in the cost of manufacturing additional items even by change in the quantity of goods produced, it is determined..
To know more about marginal visit:
https://brainly.com/question/7781429
#SPJ4
burger king, a hamburger fast-food restaurant, incurs the following costs:
Customer Service
Design
Distribution
Marketing
Production
Research and Development
Cost Item: Value Chain Business Function:
1.Cost of oil for the deep fryer.
2.Wages of the counter help who give customers the food they order.
3.Cost of the costume for the King on the Burger King television commercials.
4.Cost of children's toys given away free with kids' meals.
5.Cost of the posters indicating the special "two cheeseburgers for $2."
6.Costs of frozen onion rings and French fries.
7.Salaries of the food specialists who create new sandwiches for the restaurant chain.
8.Cost of "to-go" bags requested by customers who could not finish their meals in the restaurant.
A value chain is a concept that describes every step of a company's operations in the development of a good or service, from the acquisition of raw materials through the final delivery to the customer.
Cost Item Value Chain Business Function
1 Production
2 Distribution
3 Marketing
4 Marketing
5 Marketing
6 Production
7 Design (or research and development)
8 Customer service
All the business processes that are involved in producing a product from beginning to end are referred to as a value chain (e.g., design, production, distribution, and so on). Businesses can identify areas where costs can be cut by using a value chain analysis, which provides them with a visual representation of these operations.
To learn about more value chain
https://brainly.com/question/13439824
#SPJ4
13. Which government agency can step in when firms fail to maintain their agreements with consumers?
O Department of Agriculture
O Better Business Bureau
O The American Red Cross
O Department of Health and Human Services
Government agency can step in when firms fail to maintain their agreements with consumers through Better Business Bureau.
What would be a decent definition of business?A company or entrepreneurial entity that engages in business, industrial, or professional activity is referred to as a business. Both for-profit and nonprofit organizations can operate as businesses. Limited liability firms, corporations, partnerships, and sole proprietorships are all examples of different business structures.
What is a business, according to official definition?A business is any activity or trade that a natural person or entity engages in with the goal of profit. The trade or activity can be professional, commercial, industrial, or something else else. Providing products or services to the public while turning a profit is a frequent aspect of a business.
To know more about Business visit:
https://brainly.com/question/15826604
#SPJ1
why do you think other recruiters in the Oakland A’s organization resisted billy beane’s changes
Other recruiters in the Oakland A’s organization resisted Billy's changes because they were measuring a player's ability based on the performance they would do on the pitch, not by statistics of players.
The Oakland Athletics (also known as the A's) are an American professional baseball team based in Oakland, California. The Athletics play in Major League Baseball (MLB) as a member of the American League West division.
The Oakland Coliseum is where the team plays its home games. The Athletics have won nine World Series titles in their history. The Philadelphia Athletics, one of the American League's eight charter franchises, were founded in 1901 in Philadelphia as the Philadelphia Athletics.
They won three World Series championships in 1910, 1911, and 1913, as well as back-to-back titles in 1929 and 1930. Connie Mack was the team's owner and manager for the first 50 years, and Hall of Fame players included Chief Bender, Frank "Home Run" Baker, Jimmie Foxx, and Lefty Grove.
Learn more about Athletics
https://brainly.com/question/26036756
dahlia corporation has a current accounts receivable balance of $513,260. credit sales for the year just ended were $4,986,340. a. What is the receivables turnover? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) b. What is the days' sales in receivables? (Use 365 days a year. Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) c. How long did it take on average for credit customers to pay off their accounts during the past year? (Use 365 days a year. Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.)
The receivables turnover is 9.68 times, the days' sales in receivables are 37.9 days, and the average collection period is 38.29 days.
There are several ways to measure a company's efficiency in collecting its accounts receivable, such as:
Receivables turnover: it measures how quickly a company collects its accounts receivable by dividing credit sales by the average accounts receivable balance.
Days' sales in receivables: it measures how long it takes for a company to collect its accounts receivable by dividing 365 days by the receivables turnover.
Average collection period: it is another measure of how long it takes for a company to collect its accounts receivable by dividing the days' sales in receivables by 365 days. By analyzing these ratios, a company can evaluate its performance in terms of credit management and identify areas that need improvement.
a. The receivables turnover is a measure of how quickly a company collects its accounts receivable. It can be calculated by dividing credit sales by the average accounts receivable balance.
Receivables turnover = Credit Sales / Average Accounts Receivable Balance
= $4,986,340 / $513,260 = 9.68 times
b. The days' sales in receivables is a measure of how long it takes for a company to collect its accounts receivable. It can be calculated by dividing 365 days by the receivables turnover.
Days' sales in receivables = 365 days / Receivables turnover
= 365 / 9.68 = 37.9 days
c. The average collection period is another measure of how long it takes for a company to collect its accounts receivable. It can be calculated by dividing the days' sales in receivables by 365 days.
Average collection period = Days' sales in receivables / 365
= 37.9 / 365 = 0.104 years or 38.29 day
To know more about Average collection period visit : https://brainly.com/question/28265826
#SPJ4
When a natural monopoly exists in a given industry, the per-unit costs of production will be:
a. lowest when there are a large number of producers in the industry.
b. lower for smaller firms than for larger firms.
c. minimized at the output that maximizes the industry's profitability.
d. lowest when a single firm generates the entire output of the industry.
When a natural monopoly exists in a given industry, the per-unit costs of production will be "lowest when a single firm generates the entire output of the industry".
What exactly is Monopoly?
Monopoly in business is when a single company or entity controls the entire market for a particular product or service, eliminating or severely limiting competition. A monopoly is created when a business or group of businesses has enough control over a market to set prices, control supply, and limit competition. Monopolies can be created through a variety of means, including exclusive rights granted by governments, natural monopolies that arise from the cost structure of a particular industry, and the acquisition of competitors.
Hence, option D is correct.
To know more about monopoly,
https://brainly.com/question/7217942
#SPJ4
true or false: money must be issued by a government for people to accept it.
false. For individuals to pay money, a government must issue it.
What is money used for?Our basic requirements can be satisfied through the purchase of food, shelter, and healthcare thanks to money. It is imperative that we meet these requirements; else, both our individual wellbeing and the wellbeing of the community as a whole suffer tremendously. Money serves as a medium of commerce, a means of exchange, a value store and a standard of delayed price, among other functions.
Money's main function is to act as an exchange mechanism in business transactions. Without money, all transactions would have to be made through direct exchange of one commodity or service for another, or barter.
To learn more about money click on the given link:
brainly.com/question/25959268
#SPJ4
You work for REV. Based on the documents, what does RDM most likely stand for?
A. Remote Data Management
B. Ready Digital Manager
C. Remote Data Maintenance
D. REV Digital Measure
E. Responsive Data Maintenance
Based on documents, RDM most likely stands for Remote Data Management.
What is management?Whether it's a nonprofit, for-profit company, or government agency, management is the administration of the organization. In order to fulfill its goals by utilizing its resources, including its financial, natural, technological, and human resources, management is the process of deciding on an organization's strategy and planning the activities of its staff. In order to manage a company's human resource and ensure its success, management must ascertain the purpose, objectives, procedures, and rules of the organization. This suggests good communication in the same way that a corporate setting suggests staff involvement and some form of productive advancement or system output. Management is distinct from using machinery or controlling animals in that it can take place in both legal and illegitimate circumstances.
To learn about management, visit:
https://brainly.com/question/29023210
#SPJ1
What are the determinants of cultures that you want to cultivate from early of the business?
The determinants of culture that you would want to cultivate early in business are:
There are several key determinants of culture that businesses may want to cultivate from the early stages of the business:
Values: Establishing a clear set of core values is important for creating a strong organizational culture. Values such as integrity, accountability, and respect can help guide decision-making and behavior within the company.
Leadership: The leadership style and behavior of the company's leaders can have a significant impact on the culture of the organization. Strong leaders who lead by example and promote a positive, inclusive culture can help to foster a culture of excellence and teamwork.
Communication: Clear, open, and transparent communication is essential for building a positive culture. Regular communication and feedback channels can help to ensure that all employees feel heard and valued.
Employee engagement: Encouraging employee engagement and participation in the culture-building process can help to ensure that the culture is embraced by all employees.
Inclusion and diversity: Promoting an inclusive and diverse culture is vital for building a strong, productive, and innovative organization. This includes recognizing, respecting and valuing the differences in perspectives, backgrounds, and experiences of all employees.
Read more on work culture here: https://brainly.com/question/16049983
#SPJ1
a contribution approach income statement . multiple select question. separates costs into their fixed and variable components can assist with management decision making is prepared primarily for external reporting purposes reports both gross margin and net income
An income statement prepared using a contribution approach separates costs into their fixed and variable components, which can assist with management decision making.
This type of income statement is prepared primarily for external reporting purposes and reports both the gross margin and the net income.
One of a company's financial accounts, an income statement or profit and loss account, lists the company's revenues and costs for a specific time period.
To know more about accounts here
https://brainly.com/question/22917325
#SPJ4
How is technology used in improving the casting products?
3D printing, laser welding, and magnetic pour aids increase cast product mechanical, chemical, and dimensional qualities. This produces stronger, more lasting castings for a multitude of sectors.
What is Technology?Generally, Technology is used in various ways to improve casting products. Some examples include:
Computer-aided design (CAD) and computer-aided manufacturing (CAM) software are used to design and create digital models of casting products, which can then be used to guide the manufacturing process.
3D printing technology can be used to create prototypes of casting products, allowing for rapid iteration and testing.
Simulation software can be used to predict and analyze the performance of casting products, allowing for optimization and improvement.
Advanced imaging techniques can be used to inspect and analyze casting products, detect defects and ensure quality.
Robotics and automation can be used to improve efficiency and consistency in the casting process, as well as reduce the number of human errors.
Read more about Robotics
https://brainly.com/question/29379022
#SPJ1
what's the rate of return you would earn if you paid $950 for a perpetuity that pays $85 per year?
Return = 85/950 = 8.95% The return (RoR) is the net gain or loss on an investment over a period of time, expressed as a percentage of the original cost of the investment.
The required details for rate of return in given paragraph
When the rate of return is calculated, the percentage change between the start of the period and the end of the period. Return on Investment (RoR) can be applied to any investment vehicle, from real estate to bonds, stocks and works of art. RoR works with any asset as long as it is eventually purchased and generates cash flow at a later date. Investments are valued in part on the basis of past performance, which can be compared to assets of the same type to determine which investments are most attractive. Many investors like to choose their desired rate of return before making an investment choice. Return (RoR) is used to measure an investment's gain or loss over time. RoR can be applied to a variety of assets ranging from stocks and bonds to real estate and art.
The effects of inflation are not factored into the simple rate of return calculation, but are factored into the real rate of return calculation. The internal rate of return (IRR) takes into account the time value of money.
To know about rate of return click here
https://brainly.com/question/24301559
#SPJ4
Case study1 Teloxy Engineering has received a onetime contract to design and build 10,000 units of a new product. During the proposal process, management felt that the new product could be designed and manufactured at a low cost. One of the ingredients necessary to build the product was a small component that could be purchased for $60 in the marketplace, including quantity discounts. Accordingly, management budgeted $650,000 for the purchasing and handling of 10,000 components plus scrap. During the design stage, your engineering team informs you that the final design will require a somewhat higher-grade component that sells for $72 with quantity discounts. The new price is substantially higher than you had budgeted for. This will create a cost overrun. You meet with your manufacturing team to see if they can manufacture the component at a cheaper price than buying it from the outside. Your manufacturing team informs you that they can produce a maximum of 10,000 units, just enough to fulfill your contract. The setup cost will be $100,000 and the raw material cost is $40 per component. Since Teloxy has never manufactured this product before, manufacturing expects the following defects: % defective 0 10 20 30 40 probability of occurrence (%) 10 20 30 25 15 QUESTIONS 1. Using expected value, is it economically better to make or buy the component? 2. Strategically thinking, why might management opt for other than the most economical choice?
A contract is a legally binding agreement between two or more parties, in which an offer is made and accepted, and consideration (something of value) is exchanged. Contracts can be written or verbal and can cover a wide range of topics, including sales, employment, and services.
Is it economically better to make or buy the component and why might management opt for other than the most economical choice?1. To determine whether it is economically better to make or buy the component, you would need to calculate the expected value of each option. To do this, you would multiply the probability of each defect rate by the corresponding cost and then sum the results.
Option 1: Buying the component: The cost would be $72 per unit and there would be no defects. Therefore, the expected value of this option would be $72 x 10,000 = $720,000
Option 2: Making the component: The cost would be $100,000 + $40 x 10,000 = $500,000 for setup and raw materials. Additionally, the expected value of defects would need to be calculated using the probability of occurrence and the cost of each defect rate. (0% defective: $0 x 10%, 10% defective: $6 x 20%, 20% defective: $12 x 30%, 30% defective: $18 x 25%, 40% defective: $24 x 15%).
Therefore, the expected value of defects would be (0 x 10,000 x 10%) + (6 x 10,000 x 20%) + (12 x 10,000 x 30%) + (18 x 10,000 x 25%) + (24 x 10,000 x 15%) = $360,000. Therefore, the total expected value of this option would be $500,000 + $360,000 = $860,000
Based on these calculations, it is economically better to buy the component at $72 per unit than to manufacture it at $860,000.
2. Management may opt for other than the most economical choice for strategic reasons. For example, if the company wants to develop in-house manufacturing capabilities or maintain control over the supply chain, they may choose to manufacture the component even if it is more expensive. Additionally, if the company wants to increase its market share by offering a unique product or service, they may choose to manufacture the component even if it is more expensive.
To know more about contract visit:
https://brainly.com/question/2669219
#SPJ4
You have been hired as a research assistant and are given the following data. Employee compensation $329 Consumption 370 Exports 55 Net foreign factor income 3 Government spending 43 Investment 80 Imports 63 Interest 49 Profit 96 Rent 14 Net investment 72 a. Calculate GNP, GDP, and aggregate income. b. What is NDP? c. What is depreciation in this year?
GDP can be defined as the market value of all goods and services produced on the territory of the country in the current fiscal years. GDP according to the expenditure method
The required details for GDP in given paragraph
GDP in MP = C +I+G+(X-M)
=391+80+43+55-63
=$506
GDP=GDP+ Net Factor Income
=506 +3=509 $
Total income equals National Income (NNP in FC) = Depreciation of BSP
=509-(80 -72)
=509-8
=$501
b. Depreciation = Investment -
Net Investment = 80-72=$8c
NDP=GDP
Depreciation=506-8=$498
Gross domestic product (GDP) is a monetary measure of the market value of all final goods and services produced by countries in a given period and sold (not resold). Due to its complex and subjective nature, this measure is often tested before it is considered a reliable indicator. However, (nominal) GDP per capita does not reflect differences in the cost of living and inflation rates between countries; Therefore, using the basis of GDP per capita in Purchasing Power Parity (PPP) can be more useful to compare living standards between nations, while nominal GDP is more useful to compare economies in the international market.
Total GDP can also be broken down by the contribution of each industry or sector to the economy.
To know about GDP click here
https://brainly.com/question/1383956
#SPJ4
A firm's total profit equals Multiple Choice
a. P−MC.
b. (P−ATC)×Q.
c. P×Q.
d. (P−ATC)÷Q
A firm's total profit equals (P−ATC)×Q. Thus option B is correct.
What is firm?
A firm can be defined as a business whose main aim is to earn a profit. This will ensure that they sell their commodities and will earn Revenue. This will help them to earn a large sum of profit and further expand their business.
In this P stands for the price, ATC stands for Average total cost and Q stands for the quantity. The price at which the commodity is sold and the Total cost that is incurred in making the commodity.
If we subtract these two then the amount of profit for a commodity will be found out. Further multiplying with the quantity that is being sold will give the total amount of profit. Therefore, option B is the correct option.
Learn more about firm, Here:
https://brainly.com/question/29482295
#SPJ1
State and explain three type of business Profit
Answer:
The three types of business profit are gross profit, operating profit, and net profit.
Explanation:
Gross profit is the total revenue of a business minus the cost of goods sold. It is the profit that is left after the cost of producing and selling the goods or services has been paid for.
Operating profit is the gross profit minus operating expenses. Operating expenses include things like marketing, rent, wages, utilities, and depreciation.
Net profit is the operating profit minus taxes and other expenses. This is the actual profit that can be used to pay dividends to shareholders, pay off debt, or reinvest into the business.
The primary reason for creating a schedule of accounts receivable is
A. to be certain the accounts in the accounts receivable ledger
match the total in the general ledger
B. to show all of the customers with open accounts over the course
of the previous year
C. to make sure that customers are invoiced the correct amount for
each purchase
D. to estimate the amount of uncollectable accounts shown in the
ledger at a given time
Answer: To be certain the accounts in the accounts receivable ledger match the total in the general ledger
Explanation:
Answer: A. to be certain the accounts in the accounts receivable ledger
match the total in the general ledger
Explanation: The primary reason for creating a schedule of accounts receivable is to reconcile the accounts receivable ledger with the general ledger, ensuring accuracy, and integrity in the financial records of the company.
Accounts Receivable Ledger: The accounts receivable ledger keeps track of all the individual customer accounts and the amounts they owe. This ledger is usually maintained separately from the general ledger, which contains all the financial transactions of the company.
General Ledger: The general ledger provides a summary of all the financial transactions of the company, including accounts receivable.
Matching the totals: By creating a schedule of accounts receivable, you can compare the total amount of accounts receivable in the accounts receivable ledger with the total amount of accounts receivable in the general ledger. This ensures that both ledgers reflect the same amount and helps identify any discrepancies or errors.
Identifying errors: If the totals don't match, it could indicate errors in recording transactions, such as missing or duplicate entries. By identifying and correcting these errors, you can maintain accurate financial records and ensure the integrity of your accounts receivable information.
Learn more about accounts receivable here: https://brainly.com/question/34002000.
How do you access the Marketing Environment (analysis on Macro and Micro Environment) and Market Segmentation and Targeting?
(Example by A Company Success Case Reference)
One way to analyze the marketing environment is through a SWOT analysis, which examines a company's strengths, weaknesses, opportunities, and threats.
What is Marketing Environment?Generally, Accessing the marketing environment for a company involves analyzing both the macro and micro environments. The macro environment includes factors such as economic conditions, political and legal factors, and technological advancements, while the micro environment includes factors such as competitors, customers, and suppliers.
Market segmentation involves dividing a market into smaller groups of consumers with similar needs or characteristics. Targeting involves selecting one or more segments to pursue.
For example, a company that sells athletic footwear may segment its market based on factors such as age, gender, and level of physical activity. The company may then target specific segments, such as young, athletic men or older, recreational walkers. This company can look at Nike's example, they segment their market by gender, age, sports, and lifestyle, and targets specific segments such as professional athletes, amateur athletes, and casual users.
It's important to note that, a company success case reference can be a good guide, but the company should also conduct their own market research to gain a deeper understanding of their specific market and target audience.
Read more about Marketing Environment
https://brainly.com/question/29417580
#SPJ1
What task does not need to be covered with the human resource department
before leaving a job?
obtaining a copy of your personnel file
filling out a departing employee questionnaire and listing all the negative
points of your employer
clarifying when you will receive your last paycheck
The task that does not need to be covered with the human resource department is C.questionnaire and listing all the negative points of your employer.
What functions does the human resources department have?A human resources (HR) department handles tasks related to human resource management, including recruiting, hiring, onboarding, and providing ongoing assistance for new hires. Its tasks include: examining resumes maintaining a record of personnel data.
The HR department does not typically conduct accounting tasks. Recruitment, workplace safety, employee relations, compensation planning, labor law compliance, and training are the six primary duties of HR.
Therefore, option C is correct.
Learn more about human resources at:
https://brainly.com/question/10583893
#SPJ1
How is technology used in improving the casting products?
Answer:
Technology is used to improve casting products in a variety of ways. Computer numerical control (CNC) machining is used to create molds with greater precision and accuracy. 3D printing is used to create molds and patterns with complex shapes. 3D scanning is used to inspect and reverse engineer molds and castings. Additionally, digital automation and robotic automation are used to streamline and automate the production process.
Explanation:
If outsiders had more say in union contracts then it is likely that union wages would be
A. lower so unemployment would be higher. B. higher so unemployment would be lower. C. lower so unemployment would be lower. D. higher so unemployment would be higher.
If outsiders had more say in union contracts then it is likely that union wages would be lower so unemployment would be higher.
What is unemployment?The OECD defines unemployment as people over a certain age who are currently looking for work but who aren't employed or self-employed. Its unemployment rate, which can be used to determine the degree of unemployment, is calculated using the number of unemployed people as a percent of the labor force. The phrase "unemployed" generally refers to somebody who is not working or otherwise earning a living. There are several different types of poverty, including involuntary, cyclical, frictional, structural, and voluntary. There are essentially two types of unemployment in India.
There are four main types of unemployment in an economy: frictional, structural, cyclical, & seasonal. Each category has a unique reason.
To learn more about unemployment click on the given link:
brainly.com/question/305041
#SPJ4
In order to reduce risk in a firm, the firm would seek to enter a business that has _____.
a. high positive correlation with its present business
b. zero correlation with its present business
c. high negative correlation with its present business
d. high negative variation with its present business
A company will look to enter a market that has a strong positive association with its current business in order to lower risk inside the organisation.
A firm's definitionA company, partnership, or limited liability company (LLC) that operates for profit and provides professional services is known as a firm. A single location is what most firms have. On the other hand, a company is made up of one or more physical locations that are all owned by the same person and share the same employment identification number (EIN).
The word "firm" can refer to a wide variety of businesses, including consulting, marketing, and graphic design firms, among others. When used in a title, the word "firm" is frequently associated with businesses that provide specialised legal and accounting services.
The company name is frequently used in commercial transactions, but the degree of legal protection—for owners or employees—depends on the ownership structure that was chosen when the company was formed.
To learn more about Firm visit:
https://brainly.com/question/25491204
#SPJ4
which one of the following actions is most likely to result in higher production costs per branded pair at one of your company's plants?
'Increasing the S/Q rating of brand pairs produced from 4.5 stars to 5.5 stars' is most likely to result in higher production costs per branded pair.
What is Production?
Production is the process of creating goods or services for use or sale. Production is a business process that is used to create goods and services from various resources. It involves converting raw materials, components, or parts into finished goods that can be sold in the market or used in the production of other goods and services. Production is an essential part of any business, as it is the primary means of generating revenue.
This is because producing a higher-rated brand pair requires more resources, such as higher-quality materials, more labor, and more time. Additionally, higher-rated brand pairs are likely to be more expensive to produce, due to the higher costs associated with producing them.
Hence, option D is correct.
To know more about Production,
https://brainly.com/question/16755022
#SPJ4
Complete question:
Which one of the following actions is most likely to result in higher production costs per branded pair at one of your company's production facilities?
A) Increasing total employee compensation by 3% at a production facility and, in turn, realizing a 5% increase in production facility and, in turn, realizing a 5% increase in production worker productivity
B) Increasing spending for best practice training from $2,000 per worker to $2,500 per worker.
C) Increasing expenditures for TQM/Six Sigma quality control from $1.50 to $2.00 per pair in Year 12.
D) Increasing the S/Q rating of brand pairs produced from 4.5 stars to 5.5 stars.
E) The installation of production improvement option B.
Which product is generally LEAST influenced by geographics?
OA
OB. scuba gear
OC. video games
OD.winter coats
snow chains
An instance of geographic segmentation is an ice cream business enterprise segmenting a us of a by how warm special areas are and focused on these precise areas that are freshest and therefore greater probable to purchase ice cream.
What are geographical products?In this chapter, the time period “product geography” is used as a concept to refer to such a system of locations joined by using the commonality of an association to a specific product or category.
Demographic, psychographic, geographic, and behavioral are the four pillars of market segmentation, however think about the use of these four more types to enhance your advertising efforts.
A advertising approach created by using dividing the target market into segments on the basis of factors such as economics, meals habits, apparel habits, languages, traditions and many different features is known as geographic segmentation.
Learn more about geographics here:
https://brainly.com/question/12790602#SPJ1Mini Problem 2 Wayne and Wanda are filing MFJ with a 4-year-old dependent child. Wayne worked full time and earned $25,000. Wanda became a full-time student for the fall term (Aug thru Dec) and they have no other income. Their principal place of abode was in the U.S. for the entire tax year. Their federal taxable income was $2,300 and their federal tax liability before any credits is $231. While Wanda was a student, they paid $3,000 for childcare. What is the amount of line 10 from their Form 2441?
$3000 is the amount on line 6 of Form 2441.
$3000 is the maximum covered child support that can be claimed.
What is sentence of amount?
She spent an incredible amount of time planning her garden. New laws limit the amount candidates can spend. We have a wealth of resources available. = there are a lot of resources available
What are balance and amount?
An account balance is amount of money in financial account, such as a bank account, at a particular point in time. B. Have a savings or checking account. The account balance is the net amount after taking into account all debits and credits.
What is used of amount?
Use amount is the purchase price of all mortgages previously purchased by the buyer at the time of the decision but not yet repurchased by the seller or not purchased by the take-out investor at the time of the decision means the sum of the arithmetic mean of .
To know more about Amount visit here:
https://brainly.com/question/13045834
#SPJ1
Which statements belong in the summary? Check all that apply. - Borrowers who met certain requirements for mortgages, such as minimum income level relative to the total mortgage amount, could obtain mortgages that were qualified to be securitized. Such mortgages were called subprime, or Alt-A, mortgages. - Mortgage payments based on short-term interest rates-called adjustable-rate mortgages (ARMS)-were preferred by subprime borrowers. - Investors across the globe were buying mortgage-backed securities for the rate of return that these securities were generating. Most of these investors chose to be ignorant of the risks involved in such investments. - In the 2000s, specialized mortgage brokers were allowed to originate mortgage loans. Earlier mortgage loan originators were Savings & Loan associations (S&Ls) or banks
Prime mortgages, subprime mortgages, and Alt-A mortgages are the three main categories of mortgages.
Prime mortgages are loans that are frequently granted to borrowers that have good credit, can fulfil all conditions, and are regarded as high calibre borrowers. As a result, the interest rates they are given are frequently rather low.
Subprime mortgages are loans that are typically provided to borrowers who have bad credit histories or ratings, who fall short of the standards for conventional mortgages, or who are otherwise seen to be low quality borrowers. As a result of the mortgage being the riskiest, the interest rates they are provided are often high.
Alternative A Mortgages, a category of mortgages for borrowers with risk profiles or credit scores in the middle between prime and subprime, is the complete definition of the term "Alt-A mortgage." The holders can fulfil more conditions than subprime mortgage holders, but not as many as prime mortgage holders. While less hazardous than subprime mortgages, this mortgage is riskier than prime mortgages. As a result, the interest rates that were offered were greater than those that prime mortgage holders received but lower than those that subprime mortgage holders were given.
For such more question on mortgages
https://brainly.com/question/1318711
#SPJ4
knowing a company business standards will?
Answer:iiiiiiiii llllll
If a company increases its sales price per unit for Product A the new breakeven point will O A remain the same B. decrease O c. increase OD. More information is needed
If a company increases its sales price per unit for Product A the new break-even point will decrease.
What is the break-even point?
In economics, business, and particularly cost accounting, the break-even point is the point at which total cost and total income are equal, or "even." Although opportunity costs have been paid and capital has received the risk-adjusted, projected return, there is no net loss or gain, and one has "broken even." The point at which a business breaks even is when its sales exactly match its costs. Breakeven Point in Units = Fixed Costs (Price - Variable Costs). Sales volume, business expenses, and product pricing are all interconnected. For business owners, the break-even point is crucial since it indicates the minimum level of sales needed to turn a profit.
To learn more about break-even point click on the given link:
https://brainly.com/question/21137380
#SPJ4
Which of the following would best explain why the shift in demand from D1 to D2 would cause price to rise from P1 to P2?
a. After the shift in the demand, there would be a surplus at price P2.
b. After the shift in the demand, there would be a shortage at price P2.
c. After the shift in the demand, there would be a shortage at price P1.
d. After the shift in the demand, there would be a surplus at price P1.
Following the change in demand, there would be a economic shortage. The greatest justification for the price increase from P1 to P2 from the change in demand from D1 to D2 is provided by P1.
A market that is functioning normally has an equilibrium between the amount offered and the quantity sought at a price set by market forces. A shortage happens when the supply and demand for an item or service are out of balance. When this occurs, the market is considered to be in a state of disequilibrium. Usually, this situation only persists for a brief period of time before the commodity is delivered and the market resumes its regular course. An economic shortage occurs when the demand for goods and services outpaces the supply. In this scenario, there will be a high demand for goods or services but insufficient supply to satisfy that need, which would result in higher pricing.
To learn more about economic shortage refer here:
https://brainly.com/question/28607026
#SPJ4