Which of the following best describes the equation below? y = 5x2 - 7 A. neither linear nor nonlinear B. linear C. both linear and nonlinear D. nonlinear

The exponential decay function to model the amount of Os-182 in a sample over time is given below :Given: A radioactive isotope of the element osmium Os-182 has a half-life of 21.5 hours.

The initial amount is Ag The amount after time t in hours is A We know that if there are 100 grams of Os-182 in a sample, after 21.5 hours, there will only be 50 grams of that isotope remaining .Let's substitute these values in the exponential decay function to find the value of k. We get, The required exponential decay function is[tex]A = Ag × e^(-kt)[/tex]

Note: We are multiplying by 100/100 because the initial amount is given as 100 grams. We can also simplify the function as shown below: [tex]A = 100 × e^(-0.0322t)[/tex]Hence, the exponential decay function to model the amount of Os-182 in a sample over time [tex]is A = Ag × e^(-kt) = 100 × e^(-0.0322t).[/tex]

To know more about exponential  visit:

brainly.com/question/3985777

#SPJ11

By using the multiplication rule for transposes,  (cd)^t = d^t c^t  it is proved that the inverse of a^t is (a^- 1 )^t.The multiplication rule of transposes states that , the transpose of the product of two matrices is equal to the product of their transposes in the reverse order.

Follow the steps below to prove that inverse of a^t is (a- 1 )t,  (Let us assume A = a):

Thus, we have verified that the inverse of A^T is indeed (A^-1)^T. Therefore it is proved that  inverse of a^t is (a^- 1 )^t.

To learn more about inverse : https://brainly.com/question/3831584

#SPJ11

By removing the quiz scores 0 and 100, the median stays the same (57.5) and the mean decreases (from 62.5 to 59.375).

To remove 2 quiz scores so the median stays the same and the mean decreases, follow these steps:

1. Arrange the scores in ascending order: 0, 45, 45, 55, 60, 60, 85, 85, 90, 100.
2. Identify the current median: (55 + 60)/2 = 57.5.
3. Calculate the current mean: (0 + 45 + 45 + 55 + 60 + 60 + 85 + 85 + 90 + 100)/10 = 62.5.
4. To maintain the median, remove one score from each side of the median (one lower and one higher). This way, the remaining middle scores will still average to 57.5.
5. Remove 0 and 100 to decrease the mean, as they are the lowest and highest scores. New list: 45, 45, 55, 60, 60, 85, 85, 90.
6. Calculate the new mean: (45 + 45 + 55 + 60 + 60 + 85 + 85 + 90)/8 = 59.375.

So, by removing the quiz scores 0 and 100, the median stays the same (57.5) and the mean decreases (from 62.5 to 59.375).

Learn more about median here:

https://brainly.com/question/24460174

#SPJ11

The missing side length of the triangle with legs of 6 and 7 is approximately 9.22 units.

To determine the missing side length of a triangle with the legs of 6 and 7, we need to apply the Pythagorean theorem. The Pythagorean theorem states that in a right-angled triangle, the sum of the squares of the two shorter sides (legs) is equal to the square of the longest side (hypotenuse). This theorem is represented mathematically as:a² + b² = c²Where a and b are the lengths of the legs and c is the length of the hypotenuse. In this case, we know the lengths of the legs a and b. We need to find the length of the hypotenuse c. Therefore, we can write the Pythagorean theorem as:6² + 7² = c²Simplify this expression:36 + 49 = c²85 = c²Take the square root of both sides to find c:c = √85c ≈ 9.22 units

Know more about triangle  here:

https://brainly.com/question/28982469

#SPJ11

The divergence of f is ∇ · f = 2x + 4y + 4z. The curl of the vector field is ∇ ✕ f = < -4yz, -2x, 4xy >.

Let's first write the vector field f in component form:

f(x,y,z) = < [tex]x^2, 2y^2, 2z^2[/tex] >

Now we can compute the divergence and curl:

Divergence:

The divergence of a vector field F = < F1, F2, F3 > is defined as:

∇ · F = (∂F1/∂x) + (∂F2/∂y) + (∂F3/∂z)

Applying this formula to our vector field f(x,y,z), we get:

∇ · f = (∂/∂x)([tex]x^2[/tex]) + (∂/∂y)(2[tex]y^2[/tex]) + (∂/∂z)(2[tex]z^2[/tex])

= 2x + 4y + 4z

So the divergence of f is:

∇ · f = 2x + 4y + 4z.

Curl:

The curl of a vector field F = < F1, F2, F3 > is defined as:

∇ ✕ F = < (∂F3/∂y) - (∂F2/∂z), (∂F1/∂z) - (∂F3/∂x), (∂F2/∂x) - (∂F1/∂y) >

Applying this formula to our vector field f(x,y,z), we get:

∇ ✕ f = < (∂/∂y)(2[tex]z^2[/tex]) - (∂/∂z)(2[tex]y^2[/tex]), (∂/∂z)([tex]x^2[/tex]) - (∂/∂x)(2[tex]z^2[/tex]), (∂/∂x)(2[tex]y^2[/tex]) - (∂/∂y)([tex]x^2[/tex]) >

= < -4yz, -2x, 4xy >

So the curl of f is:

∇ ✕ f = < -4yz, -2x, 4xy >.

for such more question on divergence

https://brainly.com/question/4344214

#SPJ11

We have the vector field f = <x^2, 2y^2, 2z^2>. The divergence of f is given .

The curl of f is given by:

curl(f) = <(∂f_3/∂y - ∂f_2/∂z), (∂f_1/∂z - ∂f_3/∂x), (∂f_2/∂x - ∂f_1/∂y)>

= <0, -2z, 4y - 4x>

Therefore, div(f) = 2x + 4y + 4z and curl(f) = <0, -2z, 4y - 4x>.

Learn more about divergence here :brainly.com/question/31383099

#SPJ11

The statement, "the intensity of sound varies inversely with the square of its distance," can be explained using the inverse square law. The inverse square law states that a specified physical quantity or strength is inversely proportional to the square of the distance from the source of the physical quantity.

In other words, if the distance between the source and the receiver of the sound is doubled, the sound intensity will decrease by a factor of four. Similarly, if the distance is tripled, the sound intensity will decrease by a factor of nine.
This law applies to sound intensity because sound waves radiate outward from their source and spread out over an increasingly large area as they travel. This means that the same amount of sound energy must be spread out over a larger and larger area, resulting in a decrease in intensity.
The inverse square law is important to consider in situations where sound intensity needs to be measured or controlled. For example, in designing a concert hall, engineers need to take into account the inverse square law to ensure that sound is evenly distributed throughout the space. Similarly, in industrial settings where workers are exposed to high levels of noise, the inverse square law is important for calculating the required distance between workers and machinery to reduce the risk of hearing damage.
In conclusion, the inverse square law explains the relationship between distance and sound intensity, stating that the intensity of sound varies inversely with the square of its distance. Understanding this law is crucial in designing spaces or machinery that produce sound, as well as in protecting workers from the harmful effects of noise.

To know more about inverse square law visit:

https://brainly.com/question/30562749

#SPJ11

To write a mixed number as a division expression, one must follow certain steps. The steps are as follows:Step 1: Write the mixed number as an improper fraction. To do this, multiply the denominator by the whole number and add the numerator to it.

The result is the numerator of the improper fraction, while the denominator remains the same. For example, 3 1/2 can be written as (3 × 2 + 1) / 2 = 7/2.Step 2: Use the numerator of the improper fraction as the dividend and the denominator as the divisor in the division expression. For example, to write 7/2 as a division expression, we use 7 as the dividend and 2 as the divisor.7 ÷ 2 = Remainder 1The quotient is 3 and the remainder is 1, which means the mixed number 3 1/2 can also be written as the division expression 7 ÷ 2 with a remainder of 1. Therefore, the completed statement would be:First, write the mixed number as an improper fraction. Then, use the numerator as the dividend and the denominator as the divisor in the division expression.

To know more about division expression, visit:

https://brainly.com/question/29189074

#SPJ11

The probability that a student was born in August is 1/8

To further clarify, the probability of an event happening is calculated by taking the number of favorable outcomes and dividing it by the total number of possible outcomes.

In this case, the favorable outcome is being born in August and the total number of possible outcomes is the total number of students in the class.

The given table shows that there are 5 students who were born in August.

The total number of students in the class is 40.

Therefore, the probability of a student being born in August is:

P(August) = Number of students born in August / Total number of students

P(August) = 5 / 40

P(August) = 1/8

So, the probability that a student was born in August is 1/8 or approximately 0.125.

Learn more about probability

brainly.com/question/30034780

#SPJ11

The absolute maximum of f(x) occurs at x = -4, with a value of -25, and the absolute minimum of f(x) occurs at x = 2, with a value of -5

To find the absolute extrema of f(x) = 4x-x^2-1 on the interval [-4,0], we first find its critical points:

f'(x) = 4-2x

Setting f'(x) = 0, we get:

4 - 2x = 0

2x = 4

x = 2

Since this critical point lies outside the interval [-4,0], we must also check the endpoints of the interval:

f(-4) = 4(-4)-(-4)^2-1 = -25

f(0) = 4(0)-(0)^2-1 = -1

Therefore, the absolute maximum of f(x) occurs at x = -4, with a value of -25, and the absolute minimum of f(x) occurs at x = 2, with a value of -5.

Learn more about absolute here:

https://brainly.com/question/29213159

#SPJ11

As per the given data, the value of x is not an integer, so the value of the perimeter of the rectangle will not be an integer. the perimeter of the rectangle is 54.4 cm (approx).

Given, Length of a rectangle= (4x+7)cm

Breadth of a rectangle= (5x-4)cm

Area of a rectangle= 209cm²

Area of the rectangle is given by the formula;

Area of the rectangle = Length × Breadth

Substituting the given values;

209 = (4x + 7) (5x - 4)

Simplify the above equation

209 = 20x² - 3x - 28

Simplifying further

20x² - 3x - 237 = 0

Factoring the equation

(4x + 19) (5x - 12) = 0

Either 4x + 19 = 0

Or 5x - 12 = 0

If 4x + 19 = 0x = -19/4 (N.V)

If 5x - 12 = 0

x = 12/5

Perimeter of the rectangle= 2(Length + Breadth)

Substituting the value of Length and Breadth in the above equation

2 (4x + 7 + 5x - 4) = 2 (9x + 3) = 18 (x + 1)

∴The value of x is 12/5 (2.4)

N.V - No Value

Therefore, the perimeter of the rectangle is

18 (x + 1) or 18(2.4+1) = 54.4 cm (approx).

Note: As per the given data, the value of x is not an integer, so the value of the perimeter of the rectangle will not be an integer.

To know more about integer visit:

https://brainly.com/question/490943

#SPJ11

The probability that a randomly selected male has a systolic blood pressure between 126.26 and 159.16 mmHg is approximately 0.8219 or 82.19%.

a) We can use the formula z = (x - μ) / σ to calculate the z-scores for the given systolic blood pressures.

For x = 102 mmHg:

z = (102 - 125) / 14 = -1.64

For x = 150 mmHg:

z = (150 - 125) / 14 = 1.79

Rounding to 2 decimal places, we get:

z-score for 102 mmHg: -1.64

z-score for 150 mmHg: 1.79

b) To find the probability that a randomly selected male has a systolic blood pressure between 126.26 and 159.16 mmHg, we need to find the area under the standard normal distribution curve between the corresponding z-scores.

Using a standard normal distribution table or a calculator, we can find:

P( -1.64 < z < 1.79 ) ≈ 0.8219

Rounding to 4 decimal places, we get:

P( 126.26 < x < 159.16 ) ≈ 0.8219

Learn more about probability at: brainly.com/question/32004014

#SPJ11

(a), we are asked to find the value of a missing quantity after performing addition. (b), we are given the total number of bears and asked to determine the number of bears that belong to a specific category.(c), we are given the final result of an operation and asked to determine one of the operands.(d), we are given the number of one category and a relationship between the two categories, and asked to determine the number of the other category.

a. Type: Missing value. Subtype: Direct question.

The problem asks for a missing value, which is the number of bears Clare got. It is a direct question because the problem asks for a specific value rather than asking to solve for a general equation.

b. Type: Part-whole. Subtype: Unknown part.

The problem involves a part-whole relationship, where the whole is the total number of bears that Clare has, and the part is the number of blue bears. It is an unknown part problem because the problem asks to find the unknown quantity of blue bears that Clare has.

c. Type: Change. Subtype: Start-unknown.

The problem involves a change in the number of bugs that Kwon has, and asks for the initial number of bugs that Kwon had before the change. It is a start-unknown problem because the starting value is unknown and needs to be determined.

d. Type: Comparison. Subtype: Unknown difference.

The problem involves a comparison between the number of red bugs and blue bugs that Kwon has, and asks to find the unknown quantity of blue bugs. It is an unknown difference problem because the problem asks to find the difference between the known quantity of red bugs and the unknown quantity of blue bugs.

For such more questions on Operands:

https://brainly.com/question/30715928

#SPJ11

a. Type: Join Result Unknown, Subtype: Change Unknown b. Type: Part-Part-Whole, Subtype: Part Unknown c. Type: Join Result Unknown, Subtype: Start Unknown d. Type: Part-Part-Whole, Subtype: Part Unknown In problem a, the type of problem is Join Result Unknown, as the problem involves adding an unknown amount to a known amount to reach a certain total.

The subtype is Change Unknown, as the problem is asking how much more bears Clare got. In problem b, the type of problem is Part-Part-Whole, as the problem involves knowing the total amount and the amount of one part to find the amount of the other part. The subtype is Part Unknown, as the problem is asking how many blue bears Clare has.
In problem c, the type of problem is Join Result Unknown, as the problem involves adding an unknown amount to a known amount to reach a certain total. The subtype is Start Unknown, as the problem is asking how many bugs Kwon had at first. In problem d, the type of problem is Part-Part-Whole, as the problem involves knowing the total amount and the amount of one part to find the amount of the other part. The subtype is Part Unknown, as the problem is asking how many blue bugs Kwon has. Understanding the type and subtype of math problems can help students identify the problem-solving strategy to use. By recognizing the structure of a problem, students can develop a plan to solve it more efficiently. It also helps teachers design appropriate instructional activities that target specific problem types.

Learn more about Subtype here: brainly.com/question/166075

#SPJ11

The question that needs to be answered is "A collection of 40 coins is made up of dimes and nickels and is worth $2.60. Find how many were dimes and how many were nickels. According to the solving 28 dimes and 12 nickels were there.

"Given, There are 40 coins in total. Let the number of nickels be x and the number of dimes be y. Then the total value of coins is $2.60, which can be expressed in terms of the number of nickels and dimes:x + y = 40 ...(1)0.05x + 0.10y = 2.60  ...(2)Multiplying the first equation by 0.05, we get:

0.05x + 0.05y = 2 ... (3)

Subtracting equation (3) from equation (2), we get:

0.10y - 0.05y

= 2.6 - 2

=> 0.05y

= 0.6

=> y = 12

We can use the elimination method to solve the equations.

Multiplying equation (1) by 0.05, we get:

0.05x + 0.05y = 2 ...(3)

Now, subtracting equation (3) from equation (2), we get:

0.10y - 0.05y = 2.60 - 2 => 0.05y = 0.6 => y = 12

Therefore, the number of dimes is 28 (40-12) and the number of nickels is 12. Answer: 28 dimes and 12 nickels were there.

To know more about Subtracting equations visit:

https://brainly.com/question/12063954

#SPJ11

Express 0.38 as a ratio of integers, we can write it as a repeating decimal:  0.38 = 0.38383838, we can express 0.38 as the ratio of integers 38:99.

Find the ratio of integers, we can set x = 0.38383838... and then multiply both sides by 100:
100x = 38.38383838...
Now we can subtract the first equation from the second:
100x - x = 38.38383838... - 0.38383838...
Simplifying both sides, we get:
99x = 38
Dividing both sides by 99, we get:
x = 38/99
Therefore, we can express 0.38 as the ratio of integers 38:99.

Read more about ratio of integers.

https://brainly.com/question/31384833

#SPJ11

The value of y that gives an angle of 30 degrees between u and v is approximately 4.14.

The angle between two vectors u and v is given by the formula:

cosθ = (u . v) / (|u| |v|)

where u.v is the dot product of u and v, and |u| and |v| are the magnitudes of u and v, respectively.

In this case, we have:

u = i + 4j

v = 5i + yj

The dot product of u and v is:

u.v = (i)(5i) + (4j)(yj) = 5i^2 + 4y^2

The magnitude of u is:

|u| = sqrt(i^2 + 4j^2) = sqrt(1 + 16) = sqrt(17)

The magnitude of v is:

|v| = sqrt((5i)^2 + (yj)^2) = sqrt(25 + y^2)

Substituting these values into the formula for the cosine of the angle, we get:

cosθ = (5i^2 + 4y^2) / (sqrt(17) sqrt(25 + y^2))

Setting cosθ to 1/2 (since we want the angle to be 30 degrees), we get:

1/2 = (5i^2 + 4y^2) / (sqrt(17) sqrt(25 + y^2))

Simplifying this equation, we get:

4y^2 - 25 = -y^2 sqrt(17)

Squaring both sides and simplifying, we get:

y^4 - 34y^2 + 625 = 0

This is a quadratic equation in y^2. Solving for y^2 using the quadratic formula, we get:

y^2 = (34 ± sqrt(1156 - 2500)) / 2

y^2 = (34 ± sqrt(134)) / 2

y^2 ≈ 16.85 or 17.15

Since y must be positive, we take y^2 ≈ 17.15, which gives:

y ≈ 4.14

Therefore, the value of y that gives an angle of 30 degrees between u and v is approximately 4.14.

Learn more about angle here

https://brainly.com/question/1309590

#SPJ11

The level of measurement of the data is

a. Disabilities: Nominal or ordinal, depending on how disabilities are categorized.

b. Weight: Ratio.

c. Change in health: Ordinal.

d. Temperature: Interval.

a. Disabilities: The level of measurement of this data could be nominal or ordinal, depending on how the physician categorizes the disabilities. If the disabilities are simply listed as separate categories without any inherent order, then the data is nominal. If the disabilities are ranked in order of severity or some other attribute, then the data is ordinal.

b. Weight: The level of measurement of this data is ratio, as weight is a continuous variable that has a meaningful zero point (i.e., absence of weight).

c. Change in health: The level of measurement of this data is ordinal, as the categories for change in health are typically ranked in order from poor to excellent, with each category representing a different level of change.

d. Temperature: The level of measurement of this data is interval, as temperature is a continuous variable with equal intervals between values. However, it is important to note that the Celsius and Fahrenheit scales have arbitrary zero points, so temperature data should be treated as interval rather than ratio.

Learn more about ratio

brainly.com/question/13419413

#SPJ11

If the cost equation, which represents the "total-cost" for "Lavish-landscaping" is "y=36x", then True statement is Option (c) because "Lavish-Landscaping" costs $12 per-hour-less than "Landscape designs.

To select the True statement, we compare the cost of Landscape Designs with the cost of Lavish Landscaping and determine the difference in cost per hour.

We can start by finding the cost per hour for Lavish-Landscaping using the given equation:

y = 36x,

Here, y represents the total cost in dollars and x represents the number of hours of work.

When x = 3, the total cost is $108,

So, the per-hour cost of "Lavish-Landscaping" is $36.

Next, we find the cost per hour for "Landscape-Designs" when x = 3,

For x = 3, the value of y is $144;

So, the per hour cost of "Landscape-Designs" is $48.

To find difference in cost-per-hour, we can subtract the cost per hour for Landscape Designs from the cost per hour for Lavish Landscaping:

⇒ $48 - $36 = $12;

This means that "Lavish-Landscaping" costs $12 "per-hour" less than "Lavish-Landscaping".

Therefore, the correct statement is (c).

Learn more about Equation here

https://brainly.com/question/17337691

#SPJ1

The given question is incomplete,  the complete question is

The equations y = 36x represents the totals cost, y, in dollars, to hire Lavish Landscaping for x hours of work. The table represents the cost to hire Landscape Designs.

   Number Of Hours       Total Cost($)

                  3                           144

                 4                            192

                 5                            240

                 6                            288

Which statement is true?

(a) Landscape designs costs $12 per hour less than Lavish Landscaping.

(b) Landscape designs costs $108 per hour less than Lavish Landscaping.

(c) Lavish Landscaping costs $12 per hour less than Landscape designs.

(d) Lavish Landscaping costs $108 per hour less than Landscape designs

A toxicologist aiming to determine the lethal dosages for an industrial feedstock chemical based on exposure data would most likely utilize logistic regression.

So, the correct answer is D.

This modeling technique is appropriate because it helps predict the probability of an event, such as lethality, occurring given a set of independent variables like exposure levels.

Unlike linear regression, which assumes a linear relationship between variables, logistic regression is suitable for binary outcomes.

Polynomial regression and ANOVA may not be ideal in this case, as they focus on modeling different relationships between variables.

Scatterplots, on the other hand, are a graphical tool for data visualization and not a modeling technique.

Hence the answer of the question is D.

Learn more about exposure data at

https://brainly.com/question/30167575

#SPJ11

To calculate SST, we first need to find the sum of squares of deviations from the overall mean:

SS_total = Σ(xᵢ - μ)²

where Σ represents the sum over all 15 numbers, xᵢ is each individual number, and μ is the overall mean.

Since the overall mean is 0, we have:

SS_total = Σ(xᵢ - 0)² = Σxᵢ²

To calculate SSB, we need to find the sum of squares of deviations between the group means and the overall mean:

SS_between = n₁(ȳ₁ - μ)² + n₂(ȳ₂ - μ)² + n₃(ȳ₃ - μ)²

where n₁, n₂, and n₃ are the sample sizes of the three groups, and ȳ₁, ȳ₂, and ȳ₃ are their respective means.

Since the sample sizes are not given, we can't calculate SSB.

To calculate SSW, we need to find the sum of squares of deviations within each group:

SS_within = Σ(xᵢ - ȳᵢ)²

where Σ represents the sum over all 15 numbers, xᵢ is each individual number, and ȳᵢ is the mean of the group to which xᵢ belongs.

Using the formula above, we get:

SS_within = (x₁ - 2)² + (x₂ - 2)² + (x₃ - 2)² + ... + (x₁₅ + 5)²

We can simplify this expression by noting that each term is of the form (x - a)², where x is an individual number and a is the mean of the group to which x belongs. We can expand each term using the identity:

(x - a)² = x² - 2ax + a²

Substituting xᵢ for x and ȳᵢ for a, we get:

SS_within = (x₁² - 2x₁ȳ₁ + ȳ₁²) + (x₂² - 2x₂ȳ₁ + ȳ₁²) + ... + (x₁₅² - 2x₁₅ȳ₃ + ȳ₃²)

Simplifying and collecting like terms, we get:

SS_within = Σxᵢ² - n₁ȳ₁² - n₂ȳ₂² - n₃ȳ₃²

Since we know the group means are 2, 3, and -5, respectively, we can substitute these values into the equation above:

SS_within = Σxᵢ² - 2²n₁ - 3²n₂ - (-5)²n₃

= Σxᵢ² - 4n₁ - 9n₂ - 25n₃

Using the fact that the sample standard deviation is 5, we can write:

SS_total = Σxᵢ² = (n₁ + n₂ + n₃)S² = 15(5²) = 375

Substituting this value into the expression for SS_within, we get:

SS_within = 375 - 4n₁ - 9n₂ - 25n₃

Therefore, the values for SST, SSB, and SSW are:

SST = 375

SSB = cannot be calculated without knowing the sample sizes

SSW = 375 - 4n₁ -

To know more about derivations refer here:

https://brainly.com/question/30365299

#SPJ11

Rachel made an error in simplifying the given rational expression. Let's go through the steps to identify her mistake and find the correct simplified expression.

Given rational expression:

[tex](x^2 + 3x) / (32 + 6x)[/tex]

Rachel's work:

[tex](x^3 + 3x^2) / (22 + 6x)[/tex]

Step 1: Rachel incorrectly wrote [tex]x^3[/tex] instead of [tex]x^2[/tex] in the numerator. This is where the mistake occurred.

The correct work should be as follows:

Step 1: The numerator remains the same as [tex]x^2 + 3x.[/tex]

Step 2: The denominator should be simplified, which is [tex]32 + 6x.[/tex]

Therefore, the correct simplified expression would be:

[tex](x^2 + 3x) / (32 + 6x)[/tex]

It is important to note that no further simplification can be done without more information about the values of x or any other constraints. So, the final answer would be [tex](x^2 + 3x) / (32 + 6x)[/tex]. Rachel mistakenly wrote x^3 instead of x^2 in her work. The correct simplified expression is             [tex](x^2 + 3x) / (32 + 6x).[/tex]

For more such questions on  rational expression.

https://brainly.com/question/29061047

#SPJ8

Answer:

(the letter 'x' represents the amount of miles he hiked)

x≤8

The amount of money, in dollars, spent per gym class is $\$7.65.

Given that money spent on gym classes is proportional to the number of gym classes taken.

Max spent $45. 90$ to take $6$ gym classes.

To find the amount of money, in dollars, spent per gym class, we need to determine the constant of proportionality.

Let's assume the amount of money spent per gym class as x.

Therefore, the proportionality constant is given by:

Amount spent / number of gym classes taken

= x45.90 / 6 = x

Simplifying the above expression, we get

x = $7.65

Therefore, the amount of money spent per gym class is $\$7.65 per gym class (rounded off to the nearest cent).

Hence, the amount of money, in dollars, spent per gym class is $\$7.65.

To know more about dollars visit:

https://brainly.com/question/15169469

#SPJ11

The value of the limit is -4/3.

Using the Taylor series expansion for sin(2x) and simplifying, we get:

sin(2x) = 2x - (4/3)x^3 + (2/15)x^5 + O(x^7)

Substituting this into the expression sin(2x) - 2x, we get:

sin(2x) - 2x = - (4/3)x^3 + (2/15)x^5 + O(x^7)

Dividing by x^3, we get:

(sin(2x) - 2x)/x^3 = - (4/3) + (2/15)x^2 + O(x^4)

As x approaches 0, the dominant term in this expression is -4/3x^3, which goes to 0. Therefore, the limit of the expression as x approaches 0 is:

lim x → 0 (sin(2x) - 2x)/x^3 = -4/3

Therefore, the value of the limit is -4/3.

To know more about limit refer here:

https://brainly.com/question/8533149

#SPJ11

The given series will converge for all values of x.

To determine the convergence of the series, we need to analyze the terms and check if they approach zero as n approaches infinity. In this case, the given series is ∑[n=1 to infinity] 6*(-5)^(1/9).

Since (-5)^(1/9) is a constant value, the series can be simplified to ∑[n=1 to infinity] 6*(-5)^(1/9) = ∑[n=1 to infinity] k, where k is a constant.

For any constant value k, the series ∑[n=1 to infinity] k is an infinite geometric series. This series converges if the absolute value of the common ratio is less than 1. In our case, k is a constant value, so the common ratio is 1.

Since the absolute value of the common ratio is 1, the series ∑[n=1 to infinity] k converges for all values of x.

For more questions like Series click the link below:

https://brainly.com/question/28167344

#SPJ11

The best fit quadratic polynomial for the given data is f(x) = -1/2 x^2 + 5/2 x - 3.

Best fit quadratic polynomial for the given data:

We can use the method of least squares to find the best fit quadratic polynomial for the given data. This involves finding the quadratic function of the form f(x) = ax^2 + bx + c that minimizes the sum of the squared errors between the function and the given data points.

To find the coefficients a, b, and c, we need to solve the following linear system of equations:

Σxi^4 a + Σxi^3 b + Σxi^2 c = Σxi^2 yi

Σxi^3 a + Σxi^2 b + Σxi c = Σxi yi

Σxi^2 a + Σxi b + Σi = Σyi

where xi and yi are the coordinates of the given data points.

Substituting the values of the given data points into the above system, we get:

10a - 4b + 3c = -17

-4a + 2b - c = -5

-2a - b + 5c = -8

Solving the above system, we get:

a = -1/2, b = 5/2, c = -3

Therefore, the best fit quadratic polynomial for the given data is f(x) = -1/2 x^2 + 5/2 x - 3.

Learn more about quadratic polynomial here

https://brainly.com/question/30339345

#SPJ11

sin(α + β) = -260/493.

To solve this problem, we will use the trigonometric identities for the sum and difference of angles.

(a) We can use the identity sin(α + β) = sin(α)cos(β) + cos(α)sin(β). We have sin(α) and cos(β), so we need to find cos(α) and sin(β). Using the identity sin^2(α) + cos^2(α) = 1, we have:

cos(α) = sqrt(1 - sin^2(α)) = sqrt(1 - (21/29)^2) = 20/29

Similarly, using the identity sin^2(β) + cos^2(β) = 1, we have:

sin(β) = -sqrt(1 - cos^2(β)) = -sqrt(1 - (15/17)^2) = -8/17

Now, we can substitute into the formula for sin(α + β):

sin(α + β) = sin(α)cos(β) + cos(α)sin(β) = (21/29)(15/17) + (20/29)(-8/17) = -260/493

Therefore, sin(α + β) = -260/493.

To know more about trigonometric identities  refer here:

https://brainly.com/question/3785172

#SPJ11

To find the surface area of a right triangular prism, we need to calculate the area of each face and add them up.

The triangular faces:

The base of the triangular faces is the right triangle with legs of size 6 yd. The area of a triangle can be calculated using the formula A = (1/2) * base * height.

In this case, the base is 6 yd and the height is also 6 yd, as they are the lengths of the legs.

So, the area of each triangular face is (1/2) * 6 yd * 6 yd = 18 yd².

The rectangular faces:

There are three rectangular faces on a right triangular prism, each with dimensions of length (12 yd) and width (6 yd). The area of a rectangle is calculated by multiplying the length and width.

The area of two rectangular faces is 12 yd * 6 yd = 72.

The area of the bottom rectangular faces is 12 yd * 6 √2 yd =  101.82.

Now, let's calculate the total surface area by summing up the areas of all the faces:

Total surface area = 2 * (area of triangular faces) + 3 * (area of rectangular faces)

= 2 * 18 + 2 * 72 +101.82

= 281.82 yd²

To find the volume of a right triangular prism, we multiply the area of the triangular base by the length of the prism.

Volume = (area of triangular base) * (length)

= (1/2) * 6 yd * 6 yd * 12 yd

= 216 yd³

Learn more about the Surface area here:

https://brainly.com/question/29298005

#SPJ1

The solution to the integral is ∫ (16x-130) / (x²-16x+63) dx = -ln|x-9| + 41ln|x-7| + C

Now, let's get into the details of the problem. We are given the integral:

∫ (16x-130) / (x²-16x+63) dx

To solve this integral, we first need to factor the denominator. We can factor it using the quadratic formula, which gives us:

x²-16x+63 = (x-9)(x-7)

Therefore, we can rewrite the integral as:

∫ (16x-130) / [(x-9)(x-7)] dx

To apply this technique, we need to first write the fraction as:

(16x-130) / [(x-9)(x-7)] = A/(x-9) + B/(x-7)

where A and B are constants that we need to find. We can find A and B by multiplying both sides by the common denominator and then equating the numerators. This gives us:

16x - 130 = A(x-7) + B(x-9)

Now, we can solve for A and B by substituting values of x that make one of the terms zero. For example, if we substitute x=9, we get:

16(9) - 130 = A(9-7) + B(9-9)

Simplifying this expression gives us:

2A = -2

Therefore, A = -1.

Similarly, if we substitute x=7, we get:

16(7) - 130 = A(7-7) + B(7-9)

Simplifying this expression gives us:

-2B = -82

Therefore, B = 41.

Now that we have found A and B, we can rewrite the original fraction as:

(16x-130) / [(x-9)(x-7)] = -1/(x-9) + 41/(x-7)

Using this decomposition, we can integrate the original function by integrating each term separately. This gives us:

∫ (16x-130) / [(x-9)(x-7)] dx = ∫ [-1/(x-9) + 41/(x-7)] dx

= -ln|x-9| + 41ln|x-7| + C

where C is the constant of integration.

To know more about integral here

https://brainly.com/question/18125359

#SPJ4

a region refers to a specific part of a space, typically a subset of a plane, a three-dimensional space or higher-dimensional space.

1. To find the area between the two functions, we need to find their intersection points. Setting f(x) = g(x), we have:

-7x^3 + 4x^2 - 5 = -6x^3 - 5x^2 - 5

-x^3 + 9x^2 = 0

x^2(x - 9) = 0

So x = 0 or x = 9. We can verify that f(x) > g(x) for x in between, so the area is given by:

∫[0, 9] (f(x) - g(x)) dx

= ∫[0, 9] (-x^3 + 9x^2) dx

= [-¼ x^4 + 3 x^3]_0^9

= 81/4 square units

2. To find the area between the two functions over the given interval, we need to evaluate:

∫[33, 34] (f(x) - g(x)) dx

= ∫[33, 34] (-x - 18) dx

= [-½ x^2 - 18x]_33^34

= -671/2 square units

3. To find the area between the two functions over the given interval, we need to evaluate:

∫[8, 12] (f(x) - g(x)) dx

= ∫[8, 12] (-x^3 - 17x^2 + 70x) dx

= [-¼ x^4 - 17/3 x^3 + 35x^2]_8^12

= 68 square units

4. The region is shown below:

perl

Copy code

        |      /

        |    /

        |  /

        |/

---------*---------

       /|

     /  |

   /    |

 /      |

We need to integrate from y = 0 to y = 5. At y = 0, we have x = -5, and at y = 5, we have x = 5. So the area is given by:

∫[0, 5] [√(25 - y) - (y - 10)] dy

= ∫[0, 5] (√(25 - y) - y + 10) dy

= [2/3 (25 - y)^(3/2) - ½ y^2 + 10y]_0^5

= 125/6 square units

5. The solid is a cylinder with a frustum on top. The radius of the cylinder is 1, and its height is 1. The height of each frustum is given by h = l/4, where l is the length of the base of the frustum. Since the base of the frustum is a circle of radius r, we have l = 2√(r^2 - h^2). So we need to find the volume of the frustum from h = 0 to h = 1. At a given height h, the radius of the frustum is r = √(1 - h)^2 = 1 - h. So the volume of the frustum is given by:

∫[0, 1] π (1 - h)^2 (2√(1 - h^2))/4 dh

= π/2 ∫[0, 1] (1 - h)^2 √(1 - h^2) dh

= [π/8 (-6 (1 - h)^3 - (1

To learn more about three-dimensional visit

brainly.com/question/27271392

#SPJ11