Which of the following best describes the motion of a working gyroscope moving through space? a. the gyroscope both translates and rotates b. the gyroscope rotates, abut does not translate c. the gyroscope neither translates nor rotates d. the gyroscopes translates, but does not rotates

Answer:

The correct answer is B. Energy cannot be created or destroyed.

The law of conservation of energy states that energy cannot be created or destroyed, but it can be transformed from one form to another. This means that in any physical process, the total amount of energy in a system remains constant. Energy can be converted from one form to another, such as from kinetic energy to potential energy or from electrical energy to light energy, but the total amount of energy in the system remains the same.

The statement "Something established by authority as a rule for measurement is called a standard unit" is True.

Something established by authority as a rule for measurement is called a standard unit. Standard units provide a consistent and universally accepted basis for measuring quantities in various fields such as science, engineering, and commerce.

Standard units are essential because they ensure consistency and accuracy in measurements across different contexts and locations. They serve as a reference point for comparing and quantifying physical quantities. By establishing standardized units, authorities promote uniformity and facilitate effective communication and collaboration in scientific research, technological advancements, and global trade.

In the International System of Units (SI), which is the most widely used system of measurement, there are seven base units: meter (length), kilogram (mass), second (time), ampere (electric current), kelvin (temperature), mole (amount of substance), and candela (luminous intensity). These base units are defined based on fundamental physical constants or natural phenomena, providing a reliable and reproducible foundation for measurement.

Standard units are typically defined and maintained by internationally recognized organizations like the International Bureau of Weights and Measures (BIPM) to ensure global consistency. These organizations establish precise definitions, measurement protocols, and calibration procedures for standard units, often using advanced scientific techniques and technologies.

The use of standard units simplifies scientific research, enables accurate engineering designs, ensures fair trade practices, and facilitates international cooperation. It allows for the seamless exchange of information and data, promotes quality assurance, and supports the development of common standards and regulations in various industries.

In summary, a standard unit is a measurement rule established by authority to provide a consistent and universally accepted reference for quantifying physical quantities. It is a fundamental aspect of scientific progress, technological advancements, and global collaboration.

for more such questions on measurement

https://brainly.com/question/24842282

#SPJ11

Answer: An object's velocity can be different from its average velocity when the object's velocity is changing over time.

Average velocity is calculated by dividing the total displacement of an object by the total time taken. It represents the overall motion of an object during a given time interval. If the object's velocity remains constant during that time interval, then its velocity and average velocity will be the same.

However, if the object's velocity is not constant and changes during the given time interval, then its velocity at any specific moment may be different from its average velocity. This occurs when the object's speed or direction changes at different points in time, resulting in variations in its instantaneous velocity.

To summarize, an object's velocity can differ from its average velocity when there are changes in its speed or direction during the time interval under consideration

The weight at the foot of each glass will be the same because it is decided by the stature of the fluid column over it and the increasing speed due to gravity. Be that as it may, the weight applied by the fluid on the dividers of the holder will be diverse due to contrasts in thickness.

Since natural product juice incorporates a higher thickness than water, the mass of the same volume of natural product juice will be more noteworthy than that of water.

This implies that the constraint applied by the natural product juice on the dividers of the glass will be more prominent than the constraint applied by the water on the dividers of its glass, as the drive is straightforwardly corresponding to mass.

Subsequently, the weight of the glass of natural product juice will be higher than the weight of the glass of water.

In rundown, in spite of the fact that the weight at the foot of each glass will be the same, the weight applied by the fluid on the dividers of the holder will be diverse due to the contrasts in thickness, with the natural product juice applying a more noteworthy weight. 

To know more about pressure refer to this :

https://brainly.com/question/25736513

#SPJ1

The net force on particle q2 is a positive force pointing to the right.

To determine the net force on particle q2, we need to calculate the individual forces exerted on q2 by q1 and q3 and then add them vectorially.

The force between two charged particles can be calculated using Coulomb's law, which states that the force (F) between two charged particles is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them:

F = k * (|q1| * |q2|) / r^2

where k is the electrostatic constant.

Given:

q1 = +8.0 μC

q2 = +3.5 μC

q3 = -2.5 μC

Distance between q1 and q2 (r12) = 0.10 m

Distance between q2 and q3 (r23) = 0.15 m

First, let's calculate the force between q1 and q2:

F12 = k * (|q1| * |q2|) / r12^2

Substituting the values:

[tex]F12 = (9 \times 10^9 N m^2/C^2) * ((8.0 \times 10^-6 C) * (3.5 \times 10^-6 C)) / (0.10 m)^2[/tex]

Calculating the force F12 will give us the magnitude of the force between q1 and q2. However, since q1 and q2 have the same charge sign, the force will be repulsive, pointing to the right.

Next, let's calculate the force between q2 and q3:

[tex]F23 = k * (|q2| * |q3|) / r_{23}^2[/tex]

Substituting the values:

F23 = (9 x 10^9 N m^2/C^2) * ((3.5 x 10^-6 C) * (2.5 x 10^-6 C)) / (0.15 m)^2

Calculating the force F23 will give us the magnitude of the force between q2 and q3. Since q2 and q3 have opposite charge signs, the force will be attractive, pointing to the left.

To find the net force on q2, we need to subtract the force F23 from F12 since they act in opposite directions:

Net force on q2 = F12 - F23

Finally, we need to consider the direction of the forces. Since F12 is repulsive (positive) and F23 is attractive (negative), the net force on q2 will be positive, pointing to the right.

For more such questions on  net force visit:

https://brainly.com/question/14361879

#SPJ8

The statement "all cells are not created equal" emphasizes that within a multicellular organism, cells differentiate and specialize to possess unique characteristics and perform distinct functions, contributing to the complexity and efficiency of the organism's overall functioning.

The statement "all cells are not created equal" emphasizes the idea that within a multicellular organism, different cells can possess unique characteristics and perform distinct functions. This concept is often discussed in the field of developmental biology, which explores how cells differentiate and specialize during the growth and maturation of an organism.

During early embryonic development, cells undergo a process called cell differentiation, where they acquire specific characteristics and functions. This process is regulated by various factors, such as gene expression patterns and signaling molecules. As a result, cells differentiate into various types, such as muscle cells, nerve cells, skin cells, and blood cells, among others.

Once cells have differentiated, they become specialized to perform specific tasks in different tissues and organs. For instance, muscle cells have contractile proteins that enable movement, while nerve cells have specialized extensions called axons and dendrites that facilitate communication between different parts of the body. Similarly, blood cells have diverse roles, including carrying oxygen (red blood cells), defending against infections (white blood cells), and facilitating blood clotting (platelets).

These specialized cells are adapted to carry out specific functions efficiently and effectively, and their structures and characteristics reflect their roles within the organism.

Therefore, the statement "all cells are not created equal" highlights the idea that cells within a multicellular organism are diverse and have distinct features and functions that contribute to the overall functioning and complexity of the organism.

To learn more about The organelle plant cells click:

brainly.com/question/23970132

#SPJ1

Answer:  60 Joules (J)

Explanation:

To compute the work done by a force, you can use the formula:

Work = Force × Distance × cosθ

In this case, the force applied is 300 N, and the distance is 20 cm (which can be converted to meters by dividing by 100, giving us 0.20 m).

The angle θ represents the angle between the direction of the force and the direction of displacement. Since the force is used to compress the spring, the displacement is in the same direction as the force, and the angle θ is 0 degrees. The cosine of 0 degrees is 1, so we can omit the cosine term.

Now we can calculate the work done:

Work = 300 N × 0.20 m

Work = 60 Joules (J)

Therefore, the work done by the force in compressing the spring is 60 Joules (J).

Answer:

reflect the light

refract the light

Both Technician A and Technician B are correct.

option C.

When the pinion gear of a power rack and pinion steering gear becomes binding or stuck on the rack gear, it can cause serious problem to the vehicle and one of the prolems is that the vehicle will pull to one side.

So if we consider the statement made by the technicians,

Technician A says when a vehicle pulls to one side; the problem may be caused by a pinion gear binding on the rack gear of a power rack and pinion steering gear.

Technician B says when a power steering rack and pinion steering gear spool valve binds it may cause a vehicle to pull to one side.

So both technicians are correct.

Learn more about power steering rack here: https://brainly.com/question/30611616

#SPJ1

Doppler radars work by using radio waves that bounce off objects and thus the object can be tracked.

Doppler radars work by emitting a beam of energy from an antenna known as radio waves. The energy they release when they collide with airborne objects scatters in all directions, with some of it returning directly to the radar.

The quantity of energy returned to the radar increases with object size. We can now perceive raindrops in the atmosphere because of this.

The amount of time it takes for the energy beam to be delivered and returned to the radar also gives us the object's distance.

To learn more about Doppler radars, click:

https://brainly.com/question/28096266

#SPJ1

To know more about meter

https://brainly.com/question/30295612

#SPJ1

To ensure basic human dignity in relation to safe and healthy living, governments can implement various measures such as accessible healthcare, adequate housing, and sanitation and clean water.

Governments should place a high priority on ensuring that everyone has access to healthcare services, enabling them to receive the essential medical care without suffering financial difficulty. This entails providing access to necessary pharmaceuticals, cheap healthcare, and a strong healthcare system.

All citizens should have access to affordable and good housing, according to governments. Policies may include restrictions on rental costs, programs to expand the supply of affordable housing, and efforts to combat homelessness. Basic hygienic and safety criteria should be met by housing.

Governments must make sure that everyone has access to clean, safe drinking water and adequate sanitary facilities. The spread of diseases and the maintenance of sanitary living circumstances can be aided by investments in sewage systems, water treatment facilities, and public hygiene education.

Learn more on healthy living here https://brainly.com/question/27440736

#SPJ1

The term that best describes translational motion along a curved line is option B. curvilinear.

The translational motion refers to the movement of an object in a straight line, where all points of the object move parallel to each other. However, when the motion occurs along a curved path, such as a circle, arc, or any other non-linear trajectory, it is referred to as curvilinear motion.

In curvilinear motion, the object follows a curved path, and the velocity and acceleration vectors change direction as the object moves along the curve. This is different from rectilinear motion, which refers to motion in a straight line.

The rotational motion refers to the movement of an object around an axis or a point, such as the spinning of a wheel or the rotation of a planet. Rotational motion involves objects rotating around a fixed axis rather than moving along a curved line.

General is a broad term that does not specifically describe the type of motion along a curved line. It does not provide any specific information about the nature or characteristics of the motion. Therefore, the correct answer is option B.

The Question was Incomplete, Find the full content below :

Which of the following terms best describes translational motion along a curved line?

A. rectilinear

B. curvilinear

C. rotational

D. general

know more about translational motion here:

https://brainly.com/question/30770506

#SPJ8

The intrepid hero has done 2.332 x[tex]10^6[/tex] Joules of work in pushing the crate.

To ascertain the work done by the traveler, we first need to find the power he applied on the case. As per Newton's subsequent regulation, force is equivalent to mass times speed increase, so the power applied by the traveler on the container is:

Force = mass x speed increase

Force = 220 kg x 2 [tex]m/s^2[/tex] = 440 N

Then, we really want to work out the distance the case was moved. The pilgrim pushed the box a distance of 5.3 km, or 5,300 m.

At long last, we can compute the work done by the pioneer utilizing the equation:

Work = force x distance

Work = 440 N x 5,300 m

Work = [tex]2.332 x 10^6[/tex] Joules

Thusly, the valiant legend has done 2.332 x [tex]10^6[/tex] Joules of work in pushing the case.

The space pilgrim takes care of business on the case by applying a power that makes it speed up. The work done is equivalent to the power duplicated by the distance over which the power is applied. Involving the recipe for force, F=ma, and the given qualities for mass and speed increase, we can ascertain the power applied. Then, at that point, involving the recipe for work, W=Fd, and the given distance, we can ascertain the work done. The work done by the adventurer is 2.332 x [tex]10^6[/tex] J.

To learn more about work, refer:

https://brainly.com/question/29167651

#SPJ1

A broken stabilizer link is the most likely cause of excessive body lean and sway.

The most likely cause of excessive body lean and sway while cornering is worn or broken stabilizer (sway) bar links. The stabilizer bar, also known as the sway bar, plays a crucial role in reducing body roll and maintaining stability during cornering.

When the stabilizer bar links wear out or become broken, they lose their ability to effectively transfer forces between the suspension components, leading to increased body lean and sway. This can result in a less stable and potentially unsafe driving experience, as the vehicle may feel unstable and have reduced cornering capabilities.

In summary, while all the mentioned components can impact suspension performance, a broken or worn stabilizer bar link is the most likely cause of excessive body lean and sway while cornering. It is crucial to have the stabilizer bar links inspected and replaced if necessary to restore proper stability and handling during cornering maneuvers.

Know more about forces here:

https://brainly.com/question/12785175

#SPJ11

On one cookie containing 50 calories, you could potentially go approximately 298 meters

Given that one food calorie is equivalent to 4184 joules, we can calculate the total energy in joules contained in the 50 calorie cookie:

50 food calories * 4184 J/calorie = 209,200 joules

Assuming an average efficiency of around 25% (meaning 25% of the energy is effectively used for movement), and a body weight of 70 kilograms, we can use a rough estimation that it takes about 1 joule of energy to move 0.4 meters (based on the energy cost of walking).

Distance = (Energy obtained from the cookie * Efficiency) / (Energy cost per meter * Body weight)

Distance = (209,200 J * 0.25) / (1 J/m * 0.4 m/kg * 70 kg)

Distance ≈ 298 meters

Therefore, on one cookie containing 50 calories, you could potentially go approximately 298 meters

Learn more about calories on

https://brainly.com/question/11460467

#SPJ1

Approximately 5.88 grams of steam will pass into the calorimeter to raise the temperature of the system from 0°C to 30°C, assuming no heat loss to the surroundings.

To calculate the mass of steam that will pass into the calorimeter, we need to consider the heat exchange that occurs during the process.

First, we need to determine the heat required to raise the temperature of the water and ice from 0°C to 30°C. We can use the specific heat capacity (c) of water to calculate this:

Heat required for water: Q_water = m_water * c_water * ΔT_water

Where:

m_water = mass of water

c_water = specific heat capacity of water

ΔT_water = change in temperature of water

Given:

m_water = 80 g

c_water = 4.18 J/g°C (specific heat capacity of water)

ΔT_water = (30°C - 0°C) = 30°C

Q_water = 80 g * 4.18 J/g°C * 30°C = 9972 J

Next, we need to consider the heat required to melt the ice at 0°C into water at 0°C. This can be calculated using the heat of fusion (ΔH_fus) of ice:

Heat required for ice: Q_ice = m_ice * ΔH_fus

Where:

m_ice = mass of ice

ΔH_fus = heat of fusion of ice (334 J/g)

Given:

m_ice = 10 g

ΔH_fus = 334 J/g

Q_ice = 10 g * 334 J/g = 3340 J

Now, let's calculate the total heat required:

Total heat required = Q_water + Q_ice

Total heat required = 9972 J + 3340 J = 13312 J

Since we neglect heat loss to the surroundings, this total heat is equal to the heat gained by the steam when it condenses:

Heat gained by steam = m_steam * ΔH_vap

Where:

m_steam = mass of steam

ΔH_vap = heat of vaporization of steam (2260 J/g)

Given:

ΔH_vap = 2260 J/g

Substituting the known values into the equation, we can solve for m_steam:

13312 J = m_steam * 2260 J/g

m_steam = 13312 J / 2260 J/g ≈ 5.88 g

For more such questions on calorimeter visit:

https://brainly.com/question/28537741

#SPJ11

Answer:

As you travel up through the Earth's atmosphere, the composition of gases changes. Near the Earth's surface, the atmosphere consists mainly of nitrogen (about 78%) and oxygen (about 21%) with traces of other gases like carbon dioxide and argon. As you go higher, the amount of oxygen decreases, and the concentration of other gases becomes more prominent, such as helium, hydrogen, and ozone.

Answer:

88.89 km/h.

Explanation:

D = S + T

   = 320km + 320km = 640km.

T = D/S

T1 = 320km / 80km/h = 4 hours

T2 = 320km / 100 km/h = 3.2 hours

Ttotal = T1 + T2 = 4 hours + 3.2 hours = 7.2 hours.

S = D/T

  = 640km / 7.2 hours

  = 88.89 km/h.

*Note:

S = Average speed.

D = Total distance.

T = Total time.

The average speed of the motorist for the entire trip is approximately 88.89 km/h.

To calculate the average speed of the motorist for the entire trip, we need to consider the total distance traveled and the total time taken. In this case, the motorist travels 320 km at 80 km/h and then another 320 km at 100 km/h.

First, let's calculate the time taken for each leg of the trip:

Time taken for the first 320 km at 80 km/h:

Time = Distance / Speed = 320 km / 80 km/h = 4 hours

Time taken for the second 320 km at 100 km/h:

Time = Distance / Speed = 320 km / 100 km/h = 3.2 hours

Now, let's calculate the total distance and total time for the entire trip:

Total distance = 320 km + 320 km = 640 km

Total time = 4 hours + 3.2 hours = 7.2 hours

Finally, we can calculate the average speed:

Average speed = Total distance / Total time = 640 km / 7.2 hours ≈ 88.89 km/h

For such more questions on speed

https://brainly.com/question/30000550

#SPJ11

The external force acting on the artillery shell is 2970 x 10⁴N, which is same as the force exerted by the shell on the ship. Both acts in the opposite directions.

Mass of the artillery shell, m = 1350

Acceleration of the artillery shell, a = 2.2 x 10⁴ m/s²

a) The mass of an object is inversely proportional to its acceleration, which is directly proportional to the net force acting onto it.

A moving object accelerates more quickly as the force pushing on it increases. A decline in acceleration is observed when the mass of the object increases.

So, the external force acting on the artillery shell is,

F = ma

F = 1350 x 2.2 x 10⁴

F = 2970 x 10⁴N

b) According to Newton's third law, the magnitude of force exerted by the shell on the ship will be equal to 2970 x 10⁴N, but it will be acting in the opposite direction.

To learn more about force, click:

https://brainly.com/question/30959077

#SPJ1

The resistance indicated by the platinum thermometer at 200°C is 1.648 times the reference resistance Ro at 0°C.

For more questions on thermometer

https://brainly.com/question/29503787

#SPJ8

Answer:

[tex]W_{by}=9.00 \times 10^4 \ J\\\\W_{on}=-9.00 \times 10^4 \ J[/tex]

Option (c) is correct.

Explanation:

[tex]\boxed{\left\begin{array}{ccc}\text{\underline{Work done on/by a gas:}}\\W_{by}=P \Delta V \ or \ \int\limits^{V_f}_{V_0} {P} \, dV \\W_{on}=-P\Delta V \ or \ -\int\limits^{V_f}_{V_0} {P} \, dV \end{array}\right }[/tex]

Given:

[tex]P=1.8 \times 10^5 \ Pa\\\\V_0=1.2 \ m^3\\\\V_f=1.7 \ m^3[/tex]

Find:

[tex]W_{by}=?? \ J\\\\W_{on}=?? \ J[/tex]

(1) - Calculating the change in volume

[tex]\Delta V= V_f-V_0\\\\\Longrightarrow \Delta V=1.7-1.2\\\\\therefore \boxed{\Delta V=0.5 \ m^3}[/tex]

(2) - Calculating the work done by the gas

[tex]W_{by}=P \Delta V\\\\\Longrightarrow W_{by}=(1.8 \times 10^5)(0.5)\\\\\therefore \boxed{\boxed{W_{by}=9.00 \times 10^4 \ J}}[/tex]

(3) - Calculating the work done on the gas

[tex]W_{on}=-P \Delta V\\\\\Longrightarrow W_{on}=-(1.8 \times 10^5)(0.5)\\\\\therefore \boxed{\boxed{W_{on}=-9.00 \times 10^4 \ J}}[/tex]

Options (a) and (d) can be eliminated. Option (b) can be eliminated since there is no negative in front of the answer. This leaves the correct answer being option (c).

The delivery man exerts a force of approximately 3,012,987 N on the pizza to lift it a height of 3.85 cm.

The work done on the pizza to lift it a level of 3.85 cm can be determined utilizing the equation W = Power*d, where W is the work done, F is the power applied, and d is the distance moved. We are given W = 116 kJ and d = 3.85 cm.

To find the power , we want to switch the distance over completely to meters and the work to joules. 3.85 cm is equivalent to 0.0385 m, and 116 kJ is equivalent to 116,000 J.

Presently we can substitute the qualities in the equation and address for F:

W = Power * d

116,000 J = F0.0385 m

F = 116,000 J/0.0385 m

F = 3,012,987.01 N

Hence, the conveyance man applies a power of roughly 3,012,987 N on the pizza to lift it a level of 3.85 cm.

To learn more about force and work, refer:

https://brainly.com/question/11347650

#SPJ1

The total distance traveled by the block in a one full or complete cycle is  2A.

option C.

If a block on the end of a spring is pulled to position x = A and released. In one full cycle of its motion, it will travel the following distance as shown below;

x = A cos (ωt)

where;

During a half cycle the block will travel a total distance of A.

During another half cycle the block will travel a total distance of A.

The total distance traveled by the block in a one full or complete cycle is calculated as follows;

distance = A + A

distance = 2A

Learn more about distance of oscillation here: https://brainly.com/question/30426721

#SPJ1

Answer:

The acceleration due to gravity on the surface of a planet or celestial body is given by the formula:

g = G M / R^2

where G is the gravitational constant, M is the mass of the planet, and R is the radius of the planet.

Plugging in the values for Mercury, we get:

g = (6.674 x 10^-11 m^3/kg s^2) (3.30 x 10^23 kg) / (2.44 x 10^6 m)^2

Simplifying this expression gives:

g = 3.70 m/s^2

Therefore, the acceleration due to gravity on the surface of Mercury is approximately 3.70 m/s^2.

The position of their center of mass is also shown. the square cuboids is the most stable. Hence option B is correct.

A cuboid is a six-sided solid known as a hexahedron in geometry. Quadrilaterals make up its faces. Cuboid is short for "like a cube". A cuboid is similar to a cube in that a cuboid may become a cube by varying the lengths of the edges or the angles between the faces.

The square cuboid has its center of mass on the center of square, the masses are uniformly distributed about it.

Hence option B is correct.

To know more about cuboid :

https://brainly.com/question/29568631

#SPJ1.

The amount of acetone that was spilt is around 0.36 liters, or 360 milliliters.

To solve this problem, use the formula for volumetric thermal expansion:

ΔV = V₀βΔT

Where:

ΔV = change in volume

V₀ = initial volume

β = coefficient of volumetric expansion

ΔT = change in temperature

Also use the formula for linear thermal expansion to find the change in length of the container:

ΔL = L₀αΔT

Where:

ΔL = change in length

L₀ = initial length

α = coefficient of linear expansion

ΔT = change in temperature

Initial length can be calculated as follows:

V = L³ ⇒ L = ∛V = ∛6 L ≈ 1.82 meters

Now calculate the change in length of the container and the change in volume of acetone:

ΔL = L₀αΔT = (1.82 m)(10⁻⁵ °C⁻¹)(40 °C) ≈ 0.00073 meters

ΔV = V₀βΔT = (6 liters)(1.5 x 10⁻³ °C⁻¹)(40 °C) ≈ 0.36 liters

Since the acetone spills out of the container, its final volume is equal to the initial volume minus the change in volume:

Vf = Vi - ΔV = 6 L - 0.36 L = 5.64 L

Therefore, the volume of spilled acetone is approximately 0.36 liters or 360 milliliters.

Find out more on acetone here: https://brainly.com/question/14498053

#SPJ1

Answer:

C. Taste aversion can develop after only one pairing of a stimulus and response.

Explanation:

Taste aversion is a unique type of learned response where an individual develops a strong aversion or avoidance to a specific taste or food after a single pairing of that taste with a negative reaction, such as nausea or illness. This is in contrast to traditional conditioning, where multiple pairings of a stimulus and response are typically required for learning to occur. Taste aversion demonstrates a unique rapidity and specificity in its development, which deviates from the general principles of conditioning.

The glycerin index predicts the way certain foods affect​ the blood glucose.

The glycemic index is a numerical scale that ranks carbohydrates in foods based on how they affect blood glucose levels compared to a reference food, typically pure glucose  or white bread. Foods with a high glycerin index cause rapid increase in blood sugar levels, while foods with a low glycerin index result in a slower and more gradual increase.

The glycerin index is often used as a tool for managing blood sugar levels, particularly in individuals with diabetes. Foods with a lower glycerin index are generally considered healthier as they provide more sustained energy and have a lesser impact on blood sugar levels.

Learn more about glycerin index below.

https://brainly.com/question/30364885

#SPJ1

The CMB radiation's current temperature of 2.7 Kelvin is a result of the cooling and redshifting caused by the expansion of the Universe, which has been slowing down over time due to gravity.

The Cosmic Microwave Background (CMB) radiation is a remnant of the early hot and dense Universe. About 380,000 years after the Big Bang, the Universe cooled enough to allow the formation of neutral atoms, which made it transparent to radiation. This released the CMB radiation, which has been traveling through the Universe ever since, and its temperature has been cooling due to the expansion of the Universe. The CMB radiation is currently observed at a temperature of about 2.7 Kelvin, much cooler than the early Universe's temperature of 3000 Kelvin. This cooling is due to the expansion of the Universe, which causes the radiation to redshift to lower energies and longer wavelengths. This effect is known as the cosmological redshift. Moreover, the expansion of the Universe is not constant, but rather it is slowing down due to the gravitational pull of matter. This means that the early Universe's rate of expansion was faster than it is today, causing the CMB radiation to cool more rapidly in the past.

For such more questions on gravity

https://brainly.com/question/30054501

#SPJ11