The physical signal is always repeated to all ports on hub devices, which are used to connect numerous network hosts.
Which of the following gadgets doesn't pass broadcast data?Any broadcast packets that are received by a hub, switch, or all other segments in the broadcast domain will be forwarded by those devices, but not by a router.
What network device can be used to link several devices and does not block broadcast traffic?A hub is a basic type of Layer 1 Ethernet repeater that enables the connection of numerous devices to the same Ethernet network. All ports on a network hub get the same traffic since, unlike a switch, a hub DOES NOT split up collision domains.
To know more about hub visit :-
https://brainly.com/question/14332796
#SPJ4
A desktop computer does not have a lit link light on the back of the computer. Which of the following is the most likely reason for this
The desktop computer is not connected to a network cable, so there is no need for a link light.
What type of connection is the computer using? The type of connection a computer is using depends on the type of device that is being used to connect to the Internet. For example, if the computer is connecting to the Internet via a modem, then it is using a dial-up connection. Dial-up connections are slow, but they are still used in some rural areas where other options are not available. Alternatively, if the computer is using an Ethernet cable to access the Internet, then it is using a wired connection. Wired connections are more reliable than dial-up connections, but they require access to a physical network such as a router.Wireless connections are also popular for connecting to the Internet. Wireless connections use radio waves to transmit data, allowing users to connect without a physical connection. This can be done via a Wi-Fi router or a cellular data connection, such as 3G or 4G. Wi-Fi connections are typically faster than wired connections, but they are also more vulnerable to interference and can be difficult to set up.Finally, some computers are able to use satellite connections to access the Internet. These connections are typically slower than wired or wireless connections, but they can be used in places where other options are unavailable. Satellite connections can be expensive, however, so they are not always the best option.To learn more about desktop computer refer to:
https://brainly.com/question/28716381
#SPJ4
You have configured a wireless access point to create a small network. For security, you have disabled SSID broadcast. From a client computer, you try to browse to find the access point. You see some other wireless networks in the area, but cannot see your network. What should you do
Create a profile on the wireless client and try to browse from a client computer to the access point. You notice a few additional wireless networks.
How do you set up a wireless access point so that a wireless client can connect to it?You can use a serial cable to connect a laptop or PC to the wireless access point's console port in order to configure the access point for your client. You can see access point setup panels using terminal software and modify particular settings, including radio channel and transmit power.
Which of the above items can be turned off to assist block access to a wireless network?Utilizing MAC address filtering, turning down DHCP, and deactivating SSID broadcast all aid in limiting illegal access to wireless networks.
To know more about SSID broadcast visit:-
https://brainly.com/question/13191413
#SPJ4
Can anyone please answer this question?
What are the uses of a relational database?
Answer:
Explanation:
tool for storing various types of information that are related to each other in various ways. For example, a relational database for an online store might maintain customer data and maintain related information as well, such as their various addresses, wish lists, orders, etc.
how to make the user input a word and a letter, and display the number of times the letter is in the number
Using while loops is the purpose of my code. The user-entered words and the number of letters in each word should be printed as the final result.
How are a character and a number entered in Python?In Python, the input() and print() functions are used to receive input from users and produce output that is displayed on the screen. Users can supply the application with any information in the form of texts or numbers by using the input() function.
How can I count the number of times a word appears in a Python string?The count() method can count how many times a substring appears in a longer string. The count() function in Python iterates across a string. The result is equal.
To know more about loops visit:-
https://brainly.com/question/14390367
#SPJ4
Elias wants to name his data in an Excel file. Each column of his data begins with a label. He follows these steps in order to create a name from labels.
1. Select the Formula tab.
2. Highlight any cell that includes the label.
3. In the Defined Names group, select “Create from Selection.”
4. Select “Top row” in the Create Names from Selection pop-up box.
Which step is incorrect?
Step 1: The Data tab should be selected since it contains the Defined Names section.
Step 2: The entire data range must be selected to create names from labels.
Step 3: “Create from Selection” should be selected in the Data Tools group.
Step 4: “Top column,” not “Top row,” should be selected in the pop-up box.
According to the scenario, the incorrect step is the top column,” not “Top row,” which should be selected in the pop-up box. Thus, the correct option for this question is D.
How do you name data in Excel?Select the range you want to name, including the row or column labels. Select Formulas. Create from Selection. In the Create Names from Selection dialog box, designate the location that contains the labels by selecting the Top row, Left column, Bottom row, or Right column check box. Select ok.
The Name Box in Excel is the fastest way to create a named range: -Select a cell or a range of cells that you want to name. -Type a name into the Name Box. -Press the Enter key.
Select the range you want to name, including the row or column labels. Click Formulas then create from Selection.
In the Create Names from the selection dialog box, select the checkbox (es) depending on the location of your row/column header. Click OK.
Therefore, the incorrect step is the top column,” not “Top row,” which should be selected in the pop-up box. Thus, the correct option for this question is D.
To learn more about the Formula tab, refer to the link:
https://brainly.com/question/30000832
#SPJ1
Which of the following is NOT a means used by an attacker to do reconnaissance on a network?
a. Smurf attack
b. DNS footprinting
c. TCP/IP Stack fingerprinting
d. Christmas tree attack
e. Banner grabbing
f. Port scan attack
Option A is corret, A Smurf attack is an attack where the attacker tries to flood the target with ICMP using spoofed ping messages. This creates a huge network traffic on victim’s network, making it work abnormally.
What is a smurf attack?Disabling computer networks is the goal of a Smurf assault, a sort of distributed denial of service (DDoS) attack. The Smurf malware achieves this by exploiting weaknesses in the Internet Control Message Protocol (ICMP) and the Internet Protocol (IP).
Why is it called a Smurf attack?The name refers to the idea of several, little attackers overpowering a much larger adversary (see Smurfs). Few networks are still subject to Smurf attacks since administrators may now render a network impervious to such misuse.
To know more about Smurf attack visit:
https://brainly.com/question/29358198
#SPJ4
You are purchasing a PC system that will be used as a file and print server in a small business. Which of the following hardware selection criteria is the MOST important for this system?
RAID 1+0 array, 64-bit multi-core processor.
Which PC parts should I purchase first?The motherboard is indeed the circuit that links everything together, including your hardware, your power supply, and the graphics cards, thus you should pick it as your initial component.
According to this quiz, which tool could you use to manage the equipment on your PC?You may manage peripheral devices and other hardware components by using Windows' Device Manager app.You can update drivers and fix hardware issues with Device Manager, which also lets you inspect the technical details of hardware devices.
To know more about PC system visit:
https://brainly.com/question/13885035
#SPJ4
To represent relationships, ________ are added to tables.
A. locking keys
B. value keys
C. entity keys
D. normalized keys
E. foreign keys
foreign keys, Tables are enhanced with foreign keys to represent relationships.
What does "foreign key" mean?A row or columns of information in one table that relate to the distinct data values, frequently the primary key data, in another table are said to be "foreign keys." In a relational database, foreign keys link between two or more tables.
How do primary keys and foreign keys differ?A main key typically emphasizes the table's uniqueness. It guarantees that the value in that particular column is distinct. Typically, a foreign key is utilized to establish a connection among the two tables.
To know more about foreign key visit :
https://brainly.com/question/15177769
SPJ4
Which of the following is not an aggregate function that can be applied in a total row?
a. MAX
b. AVERAGE
c. COUNT
d. VLOOKUP
VLOOKUP is not a aggregation function that can be applied in a total row. Correct option is 'd' .
Aggregate functions perform calculations on a set of values and return a single value. This function ignores null values. Often used in the GROUP BY clause of SELECT statements.
All aggregate functions are deterministic. That is, aggregate functions return the same value each time they are called with a particular set of input values.
SQL does not have all as a built-in aggregate function. Average is used to find the average, MAX is used to find the maximum value and count is used to COUNT the number of values.
For further information regarding aggregate functions, click the link below:
brainly.com/question/28536009
#SPJ4
There is no aggregation function in VLOOKUP.
A single value is returned by aggregate functions after they have performed calculations on a set of values. Null values are ignored by this function. frequently used the SELECT statements' GROUP BY clause.
They are all deterministic aggregate functions. In other words, when an aggregate function is run with a specific set of input values, it always returns the same result.
All is not a built-in aggregate function in SQL. The terms average, max, and count are used to determine the average, max, the maximum value, and count, the number of values.
To know more about aggregate function, refer:
brainly.com/question/28536009
#SPJ4
For this assignment, you will create a calendar program that allows the user to enter a day, month, and year in three separate variables as shown below.
Please enter a date
Day:
Month:
Year:
Then, your program should ask the user to select from a menu of choices using this formatting:
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
If a user chooses option one, the program should display how many days are in the month that they entered. If a user chooses option two, the program should display how many days have passed in the year up to the date that they entered.
Your program must include the three following functions:
leap_year: This function should take the year entered by the user as a parameter. This function should return 1 if a year is a leap year, and 0 if it is not. This information will be used by other functions. What is a Leap Year? (Links to an external site.)
number_of_days: This function should take the month and year entered by the user as parameters. This function should return how many days are in the given month. (Links to an external site.)
days_passed: This function should take the day, month, and year entered by the user as parameters. This function should calculate the number of days into the year, and return the value of number of days that have passed. The date the user entered should not be included in the count of how many days have passed.
Hints
Start by defining your variables, using comments. You will need a separate variable for day, month, and year that store numbers input from the user.
Make sure to name your three functions exactly as they are named above, and pass the parameters exactly in the order specified below:
leap_year(y)
number_of_days(m, y)
days_passed(d, m, y)
Once you have a function that calculates whether a year is a leap year, that function should be called within your number_of_days() function. February can have either 28 or 29 days, so your number_of_days() function needs to take into account whether or not it is a leap year.
Once you have a function that calculates the number of days in a given month, that function should be called within your days_passed() function. Different months have different numbers of days, so your days_passed() function needs to take into account what month of the year it is.
Sample Run 1
Please enter a date
Day: 5
Month: 5
Year: 1984
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
1
31
Sample Output 1
Please enter a date
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
31
Sample Run 2
Please enter a date
Day: 21
Month: 6
Year: 2016
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
2
172
Sample Output 2
Please enter a date
Menu:
1) Calculate the number of days in the given month.
2) Calculate the number of days passed in the given year.
172
Answer:
hummm i have the same work i got a A
is this it is
Explanation:
For this assignment, you will create a calendar program that allows the user to enter a day, month, and year in three separate variables as shown below. Please enter a date Day: Month: Year: Then, your program should ask the user to select from a menu of choices using this formatting: Menu: 1) Calculate the number of days in the given month. 2) Calculate the number of days passed in the given year. If a user chooses option one, the program should display how many days are in the month that they entered. If a user chooses option two, the program should display how many days have passed in the year up to the date that they entered. Your program must include the three following functions: leap_year: This function should take the year entered by the user as a parameter. This function should return 1 if a year is a leap year, and 0 if it is not. This information will be used by other functions. What is a Leap Year? (Links to an external site.) number_of_days: This function should take the month and year entered by the user as parameters. This function should return how many days are in the given month. (Links to an external site.) days_passed: This function should take the day, month, and year entered by the user as parameters. This function should calculate the number of days into the year, and return the value of number of days that have passed. The date the user entered should not be included in the count of how many days have passed. Hints Start by defining your variables, using comments. You will need a separate variable for day, month, and year that store numbers input from the user. Make sure to name your three functions exactly as they are named above, and pass the parameters exactly in the order specified below: leap_year(y) number_of_days(m, y) days_passed(d, m, y) Once you have a function that calculates whether a year is a leap year, that function should be called within your number_of_days() function. February can have either 28 or 29 days, so your number_of_days() function needs to take into account whether or not it is a leap year. Once you have a function that calculates the number of days in a given month, that function should be called within your days_passed() function. Different months have different numbers of days, so your days_passed()
To achieve server scalability, more servers may be added to a configuration and make use of:
Choose matching definition
1. Inbound packets are traversing the active firewall and return traffic is being sent through the passive firewall
2. load balancers
3. RAID
Clustering
Load balancing
To achieve server scalability, more servers may be added to a configuration and make use of: 2. load balancers
How does a load balancer operate?A load balancer serves as the "traffic cop" in front of your servers, distributing client requests among all servers equipped to handle them in a way that maximizes speed & capacity utilization and makes sure that no server is overloaded, which can result in performance degradation.
What is load balancing at Layer 4?Without needing to see the content of messages, Layer 4 load balancing controls traffic based on network metadata like protocols and application ports.
To know more about server scalability visit:
https://brainly.com/question/29869699
#SPJ4
which of the following consists of rules and standards that define how a database organizes data?
Answer: The rules and standards that define how a database organizes data are called the database schema. The schema specifies the structure of the database, including the names and data types of the fields in each table, as well as any relationships between tables. It provides a blueprint for how the data is stored and accessed, and it helps to ensure the integrity and consistency of the data within the database. The schema is typically defined using a specialized language or tool, and it can be modified as needed to reflect changes in the data or the needs of the users.
You are working on a computer with a host name of nntp-9.BoutiqueHotel. What is the NETBIOS name of this computer
NetBIOS domain name: The DNS domain name is often the parent domain of the NetBIOS domain name. For instance, the NetBIOS domain name is contoso if the DNS domain name is contoso.com.
Windows 10: Where can I locate my NetBIOS name?You may verify NetBIOS and your Active Directory domain FQDN with a few straightforward command prompt commands. Information is seen when you type nbtstat -n. There will be numerous entries under Name, and one of the Group types will be NetBIOS.
How many characters may a fully qualified domain name (FQDN) have in total?The host name and fully qualified domain name (FQDN) are limited to 63 bytes per label and 255 characters per FQDN, respectively.
To know more about DNS visit:-
https://brainly.com/question/17163861
#SPJ4
under what circumstances would a multi-domain structure not be an ideal choice?
A multi-domain structure would not be the best option in PDC emulator master. conditions.
Can a forest contain many domains?Multiple domain trees may exist in a forest. When a new tree is created in a forest, its root is a child domain of the original root domain.
What is a domain and how can members of the domain's machines and users benefit from it?Network resources including computers, servers, and user accounts that allow for centralized management are grouped together as domains. It is possible to control which resources, including shared folders and printers, users and computers within a domain can access.
To know more about multi-domain structure visit :-
https://brainly.com/question/1133820
#SPJ4
Which of the following can be described as an isolated guest operating system installed on top of a normal operating system?
Select one:
a. virtual machine
b. physical server
c. host computer
d. emulated PC
An isolated guest operating system that is put on top of a regular operating system is what is known as a virtual machine.
What advantages can virtual machines offer?
Data accessibility, sharing, backup, and recovery are made simple with the aid of virtual machine solutions, providing flexibility and mobility in company operations. This helps to ensure company continuity as well as the benefits of cooperation and enhanced productivity.
What are the workings of a virtual machine? It is what?
A computer file that mimics the operation of a real computer is called a virtual machine. Typically, these files are referred to as images. It can function as the entire computer experience for the user or operate in a window as a separate computing environment, typically using a different operating system.
To know more about virtual machine visit:
https://brainly.com/question/29535108
#SPJ4
To change rows for which a specific condition is true, use the ____ command
a. CHANGE b. MODIFY c. UPDATE d. ALTER
Use the update command to modify any rows for which a specified condition is true. As a result, choice (c) is the appropriate response to the question.
In what command are the rows modified?The existing records in a table can be changed using the SQL UPDATE query. To only update the chosen rows rather than all the data, we can use the WHERE clause with the UPDATE query.
What command should I use to change the data in a table?ALTER is a Data Definition Language (DDL) statement and a SQL command used in Relational DBMS. ALTER can be used to modify the database's table's structure (like add, delete, drop indexes, columns, and constraints, modify the attributes of the tables in the database).
To learn more about update command visit:
brainly.com/question/15497573
#SPJ1
URGENT: What questions would you ask a USER when in a requirements-gathering session? Multiple answers may be selected.
1. Are there any websites that you like or dislike?
2. What key information do you expect to find on the site?
3. What kind of security would you like to be implemented for the transactions you might do?
4. What might help you to navigate the sire?
The questions would you ask a user when in a requirements-gathering session are:
2. What key information do you expect to find on the site?
3. What kind of security would you like to be implemented for the transactions you might do?
What is a requirements-gathering session?The act of developing a list of requirements to explain what a project is about and its aim is known as requirement gathering. Stakeholders, whether clients, employee users, consumers, or vendors, can provide insights.
Requirement gathering is frequently used to create project blueprints. Developers, for example, adjust requirements between iterations.
Therefore, the correct options are 2 and 3.
To learn more about the requirements-gathering session, refer to the link:
https://brainly.com/question/29768295
#SPJ1
Jack wants to insert a Win/Loss sparkline in Excel. To do this, he can click on the cell he wants to insert a Sparkline in, then click Apps tab, select Win/Loss Sparkline from the Sparklines group and then click OK. (T/F)
In Excel, Jack wishes to add a Win/Loss sparkline. He may accomplish this by clicking in the cell where he wants to place the Sparkline, selecting the Apps tab, and then selecting the Given statement is True.
Where is the Sparklines group in Excel?
Simply click Sparklines on the Insert tab to choose the correct sparkline type. Due to your decision in step 1, you will notice that the first field in the Insert Sparklines dialog box is already populated.
The Sparklines crew where are they?
Follow these instructions to make a sparkline in Excel: Wherever you wish to add a sparkline, usually at the end of a row of data, choose a blank cell. the Sparklines group on the Insert tab.
To know more about sparkline group visit:
https://brainly.com/question/29832130
#SPJ4
Authorized holders must meet the requirements to access ____________ in accordance with a lawful government purpose: Activity, Mission, Function, Operation, and Endeavor. Select all that apply.
Authorized holders must meet the requirements to access Operation in accordance with a lawful government purpose. An authorized person can be meant as a person approved or assigned by the employer to perform a specific type of duty or to be at a specific location at the jobsite.
The five items listed (Activity, Mission, Function, Operation, and Endeavor) are all different types of tasks or projects that the government may conduct, and access to them is restricted to authorized individuals who meet the necessary requirements. All of the five items are included in the sentence and are being referred as the things that authorized holders must meet the requirements to access, therefore all of them apply.
Learn more about Authorized here, https://brainly.com/question/30101679
#SPJ4
To generate a surrogate key, Microsoft Access uses a(n) ____ data type.
a. identity
b. autoNumber
c. surrogate
d. sequence
Consider the following code segment. int[] nums = {10, 5, 8, 13}; for (int i : nums) { System.out.print(i + " "); } What is printed when this code segment is run?
Since the code section does not compile, the array newVals will be empty. A value that can be printed is not returned by the reset procedure.
What will happen to the program's output if the array's starting address is 65486?# Incorporate Stdio H void main () int arr [] 12 14 15 23 45; printf%U%U ARR &ARR);?
The array's base address is 65486, therefore arr, &arr points to the array's base address arr. As a result, the program's output is 65486, 65486.
How to use length () in C++ to determine an array's length?Thus, by simply dividing the array's size by the size each member of the same acquired, we can determine the total number.
To know more about array visit:-
https://brainly.com/question/19570024
#SPJ4
Which term is used to describe the overall structure the OS uses to name, store, and organize files on a drive
The term 'File System' is used to describe the overall structure the operating system uses to name, organize, and store files on a drive
An integral part of an operating system (OS) is known as a File System. A File System is a data structure that name, organize, and store data and information on storage devices ( such as hard drives, floppy disc, etc.), making them retrievable easily. FaT32 and NTFS are examples of file systems of operating systems. Different operating systems use different file systems, but all have similar features. Microsoft Windows is always installed on a disk volume that uses the NTFS file system.
Thus, the overall structure that an operating system uses to name, organize, and store files on a disk is called File System.
You can learn more about operating system at
https://brainly.com/question/22811693
#SPJ4
A directory includes the files a.py, b.py, and c.txt. Which command will copy the two files ending in .py to the /tmp/ directory?
A. cp !!.py /tmp/
B. cp *.py /tmp/
C. cp. \.py /tmp/
D. cp #.py /tmp/
E. cp $?.py /tmp/
The command that will copy the two files ending in .py to the /tmp/ directory is B. cp *.py /tmp/. The command cp !!.py /tmp/ uses the !! history substitution, it means that it will copy the last command which is not in this case the files that ends with .py, it could be any command.
The command cp. \.py /tmp/ it's not a valid command because cp. is not a valid option and \.py is not a valid file extension, it will return an error. the command cp #.py /tmp/ doesn't copy the files that ends with .py because # is used to reference the command number in history not the files, it will return an error. The command cp $?.py /tmp/ doesn't copy the files that ends with .py because $? is used to reference the exit status of the last command, it will return an error.
Learn more about code, here https://brainly.com/question/30087302
#SPJ4
___________ characters is the average character length that will appear on a mobile device for your email.
25 to 30 characters is the average character length that will appear on a mobile device for your email.
How much time is excessive for an email?The studies and guidance from industry professionals indicate that 125 words maximum is your best bet. However, you should limit it to between 75 and 100 words for optimum impact. This is not to mean that you must adhere to this guideline in every single instance for every email you send.
What is the ideal email character count?40–100 characters is the optimum length. Best practises: Keep in mind that some of your readers might open your emails on their mobile devices. By making your preheader text mobile-optimized, you can raise your open rates.
To know more about email visit
brainly.com/question/14666241
#SPJ4
WILL GIVE BRAINLIEST!!! Please help me create an image filter in Python, for my Code HS assignment. I have tried everything and nothing will work.
Below is an example of a custom image filter that inverts the colors of an image:
from PIL import Image
def custom_filter(image):
width, height = image.size
pixels = image.load()
for x in range(width):
for y in range(height):
r, g, b = pixels[x, y]
pixels[x, y] = (255-r, 255-g, 255-b)
return image
# Usage example
original_image = Image.open("example.")
inverted_image = custom_filter(original_image)
inverted_image.save("inverted_example.")
What is the Image Filter about?The above filter uses the Python Imaging Library (PIL) to open an image file, iterate through each pixel, and invert the red, green, and blue color channels by subtracting each channel's value from 255. The resulting image will have inverted colors, like a negative film.
Therefore, You can use this as a starting point and experiment with different ways of modifying the pixels to create your own unique filter. Some ideas to try:
Modifying only a specific color channel in each pixelSwapping color channels in each pixelModifying pixels based on their brightness or saturationModifying pixels based on the pixels around them (e.g. blur, sharpen)Combining multiple modifications togetherLearn more about Filter from
https://brainly.com/question/10169776
#SPJ1
See transcribed text below
Create an Image Filter
In this project, you can pair up with a partner to develop a novel image filter that can be applied to any digital image of your choosing! You will describe your image filter, your development process, and embed your image filter along with its description on your personal portfolio website.
YOUR TASK:
Fill in the function custom_filter that takes in an Image as a parameter, and modifies the pixels in the image in some way to create a new image, then returns that modified Image!
Make your filter unique. Experiment with different ways of modifying each pixel in the image.
Here are some questions to help you brainstorm your custom filter:
• What happens if you only modify one specific color channel in each pixel (red, blue, or green)? • What happens if you swap color channels in each pixel?
• What happens if you only modify pixels if they have a certain amount of red, blue, or green? • What happens if you modify a pixel based on the pixels around it?
Have fun!
Which of the following CSS3 properties configure the alignment of text within a table?
a. align
b. caption
c. text-align
d. border-spacing
Text-align
How should text be aligned?Text-align illustration Paragraph alignment,To align a paragraph, click anywhere within it, or choose several paragraphs. In the Paragraph group, select an alignment choice. Shortcuts: Ctrl + L will align you to the left. Ctrl + R will align you to the right. Ctrl + C will align the center. To justify, use Ctrl + J.
Text alignment is a paragraph layout property that influences how text appears within a paragraph. For example, in a left-aligned paragraph (the most frequent alignment), text is aligned with the left margin. Text in a justified paragraph is aligned with both margins.
To learn more about text-align to refer:
https://brainly.com/question/13423071
#SPJ4
Perfective maintenance usually is cost effective ____ the system's operational life.
A) early in
B) during the middle of
C) late in
D) all of the above
In the middle of the system's operational life, perfective maintenance is typically cost-effective.
Which kind of maintenance improves an existing system?An operating system receives improvements through adaptive maintenance, making it simpler to utilize the system. Contrary to corrective maintenance, adaptive maintenance is less urgent since business and technological changes may take time to materialize.
What is the procedure for managing modifications to the system requirements while the software is being developed?The Software Development Life Cycle (SDLC) is a procedure used in software engineering to systematically manage, coordinate, and regulate changes made to documents, codes, and other entities.
To know more about cost-effective visit :-
https://brainly.com/question/28448166
#SPJ4
True or False: A base register is used to transform physical addresses (generated by the program) into virtual addresses.
False, a base register is not employed to convert physically generated addresses into virtual addresses.
How does the base & bounds method translate virtual memory addresses?Each memory reference's virtual address and bound register are checked, and the result is added to the base register to create the physical address. An operating system trap is set off by a bound violation. The bound register appears to control the extent of a wholly private memory that is shared by all processes.
In an operating system, what does address translation mean?Translation of addresses The system converts the logical address into a physical address and creates an entry in the page table when allocating a frame to any page. This entry will be used throughout the execution of the application.
To know more about virtual addresses visit :-
https://brainly.com/question/28261277
#SPJ4
Consider the following correct implementation of the selection sort algorithm public static void selectionsort(int[] elements) for (int j = 0; j < elements.length - 1; j++) { int minIndex = 1; for (int k = 1 + 1; k < elements.length; k++) { if (elements[k] < elements[minIndex]) minIndex - k; } > if (1 minIndex) int temp = elements[i]; elements - elements[minIndex); elements[minIndex] - temp; // Line 19 The following declaration and method call appear in a method in the same class as selectionsort. int[] arr - (9, 8, 7, 6, 5): selectionsort(arr); How many times is the statement elements[minIndex] - temp: in line 19 of the method executed as a result of the call to selectionsort The following declaration and method call appear in a method in the same class as selectionsort. int arr - 19, 8, 7, 6, 5): selectionsort(arr); How many times is the statement elements[minIndex] = temp: in line 19 of the method executed as a result of the call to selectionsort? 2 3 D 4 5
In line 19 the method executed as a result of the call to selection sort is 4. Option E is correct.
[5, 10, 2, 1, 12]
iteration 1:
Line 11 is executed 2
iteration 2:
Line 11 is executed 1
iteration 3:
Line 11 is executed 1
iteration 4:
Line 11 is executed 0
Line 11 is executed a total of 2+1+1 = 4 times
Answer: 4
The access specifier public indicates that the method can be accessed by anyone static. In this case, accessing static members is not reliant on the object. This indicates that the method returns nothing or void.
To learn more about static void
https://brainly.com/question/14008300
#SPJ4
A user reports a laser jet printer is not printing properly. A technician prints a test page and notices the toner is smeared on the page. The technician confirms the toner cartridge is installed correctly and the paper in the tray is the right size. Which of the following printer components is the MOST likely cause of the problem
Fuser is the MOST likely cause of the problem. NCSoft and Harmonix have jointly produced the rhythm game Fuser.
What is Fuser?On December 19, 2022, Harmonix made the decision to end the game's online functionality. After this date, gamers will still be able to utilize all of their purchased material in the game's offline modes, but the game and all DLC will no longer be available for purchase.Inkjet printers cannot print as quickly as laser printers. Most can print more pages per time since they have high-capacity paper trays. Additionally, they are designed to withstand monthly printing of thousands of pages without experiencing wear and tear.The printer's fuser unit, which consists of two heated rollers, is what fuses the toner to the paper being printed on. In light of this, it is important to inspect the fuser if toner smears appear on the printed page after printing.The complete question is,
A user reports a laserjet printer is not printing properly. A technician prints a test page and notices the toner is smeared on the page. The technician confirms the toner cartridge is installed correctly and the paper in the tray is the right size. Which of the following printer components is the MOST likely cause of the problem?
A. Fuser
B. Roller
C. Memory
D. Toner
To learn more about Fuser refer to:
https://brainly.com/question/14339069
#SPJ4