Answers
Answer:
A
Explanation:
I'm doing that rn and that's the answer
Related Questions
Draw a complete structure for a molecule with the molecular formula C2H3CL. • Explicitly draw all H atoms. • In cases where there is more than one answer, just draw one.
Answers
The molecular formula C2H3CL indicates that the molecule has 2 carbon atoms, 3 hydrogen atoms, and 1 chlorine atom.
To draw the structure, we start with the carbon atoms and connect them with a single bond. We then add the hydrogen atoms to satisfy the valency of each carbon atom. One carbon atom must have 2 hydrogen atoms attached to it, while the other carbon atom only needs one hydrogen atom.
Now we have C2H4, which is ethene. However, the presence of the chlorine atom means that one of the hydrogen atoms must be replaced with a chlorine atom. We can place the chlorine atom on either carbon atom, but let's choose the carbon atom that only has one hydrogen atom attached to it.
So the final structure is:
H H
| |
C=C
| |
Cl H
For more such questions on atoms
https://brainly.com/question/6258301
#SPJ11
One possible molecule with the molecular formula C2H3Cl is vinyl chloride (CH2=CHCl), which has two carbon atoms double-bonded to each other and single-bonded to one chlorine atom and one hydrogen atom each.
The molecular formula C2H3Cl indicates that the molecule contains two carbon atoms, three hydrogen atoms, and one chlorine atom. To draw the structure, we can start by placing the atoms in a way that satisfies the valency of each element. Carbon atoms can form up to four bonds, while hydrogen atoms can form only one bond, and chlorine atoms can form one or two bonds.
One possible molecule that satisfies these criteria is vinyl chloride (CH2=CHCl), which has two carbon atoms double-bonded to each other and single-bonded to one chlorine atom and one hydrogen atom each. The double bond between the two carbon atoms means that they share two pairs of electrons, while the single bonds between carbon and chlorine, and between carbon and hydrogen, mean that they share one pair of electrons each.
To make the structure more clear, we can draw the molecule in a way that shows the spatial arrangement of the atoms. In this case, the molecule has a linear shape, with the two carbon atoms and the chlorine atom lying in the same plane and the hydrogen atoms pointing outwards.
learn more about molecule here:
https://brainly.com/question/19556990
#SPJ11
Consider the titration of 30.0 ml of 0.301 m weak base b (kb = 1.3 x 10⁻¹⁰) with 0.150 m hi. what would be the ph of the solution after the addition of 20.0 ml of hi?
Answers
The pH of the solution after the addition of 20.0 mL of HI is 4.50.
This is a problem involving the titration of a weak base with a strong acid. At the beginning of the titration,
we have a solution of 30.0 mL of 0.301 M weak base B, which we can assume is fully dissociated into its conjugate acid and hydroxide ions:
B + H₂O ⇌ BH⁺ + OH⁻
At this point, we can use the equilibrium constant expression for the base dissociation reaction to calculate the concentration of OH⁻ ions in the solution:
Kb = [BH⁺][OH⁻] / [B]
Since we know the value of Kb for the base B, and we know the initial concentration of B, we can solve for [OH⁻]:
[OH⁻] = √(Kb[BH⁺]) = √[(1.3 × 10⁻¹⁰)(0.301)] = 1.03 × 10⁻⁶ M
Since the base B is weak, we can assume that [OH⁻] remains constant throughout the titration.
The addition of the strong acid HI will react with the OH⁻ ions in the solution to form water and the conjugate acid of the strong acid, I⁻:
H⁺ + OH⁻ → H₂O
HI + OH⁻ → I⁻ + H₂O
At the equivalence point of the titration, all of the OH⁻ ions will be consumed by the strong acid, and we will be left with a solution of the conjugate acid of the strong acid (in this case, I⁻) at a concentration of:
[C] = [HI]V[HI] / (V[HI] + V[B])
where [HI] is the concentration of the strong acid, V[HI] is the volume of strong acid added, and V[B] is the initial volume of the weak base.
At the midpoint of the titration (when half of the strong acid has been added), the concentration of the weak base and strong acid are equal,
and we can use the Henderson-Hasselbalch equation to calculate the pH of the solution:
pH = pKb + log([BH⁺] / [B])
At this point, we have added 10.0 mL of the strong acid HI, so we have used up half of the initial 30.0 mL of weak base. Therefore, the final volume of the solution is 40.0 mL (20.0 mL of HI + 20.0 mL of B).
The concentration of the weak base at the midpoint of the titration is:
[B] = 0.301 M × (20.0 mL / 40.0 mL) = 0.151 M
The concentration of the conjugate acid at the midpoint of the titration is:
[BH⁺] = Kb[B] / [OH⁻] = (1.3 × 10⁻¹⁰)(0.151 M) / (1.03 × 10⁻⁶ M) = 1.91 × 10⁻⁷ M
Substituting these values into the Henderson-Hasselbalch equation, we get:
pH = pKb + log([BH⁺] / [B]) = 9.89 + log(1.91 × 10⁻⁷ / 0.151) = 4.50
Therefore, the pH of the solution after the addition of 20.0 mL of HI is 4.50.
To know more about titration refer here
https://brainly.com/question/2728613#
#SPJ11
how many kilograms of co₂ equivalents are emitted in the production and post-farmgate processing of 23 kg of pork?
Answers
Answer:The carbon footprint of pork varies depending on the location and the production methods used. On average, the carbon footprint of pork production is estimated to be around 3.8 kg CO2e per kg of pork.
So for 23 kg of pork, the total carbon footprint would be:
3.8 kg CO2e/kg * 23 kg = 87.4 kg CO2e
Therefore, approximately 87.4 kg of CO2 equivalents are emitted in the production and post-farmgate processing of 23 kg of pork.
learn more about equivalents
https://brainly.com/question/25197597?referrer=searchResults
#SPJ11
Suppose you had a 110 g piece of sulfur. what net charge, in coulombs, would you place on it if you put an extra electron on 1 in 1012 of its atoms? (sulfur has an atomic mass of 32.1)
Answers
To determine the net charge on the piece of sulfur, we need to calculate the total number of extra electrons added and then convert it to coulombs.
First, let's find the number of sulfur atoms in the given mass of 110 g:
Number of moles of sulfur = Mass of sulfur / Atomic mass of sulfur
Number of moles of sulfur = 110 g / 32.1 g/mol ≈ 3.429 moles
Next, we'll calculate the total number of sulfur atoms in 110 g:
Number of sulfur atoms = Number of moles of sulfur × Avogadro's number
Number of sulfur atoms = 3.429 moles × 6.022 × [tex]10^ ^{23}[/tex]atoms/mol ≈ 2.065 × [tex]10^{24}[/tex] atoms
Now, let's determine the number of extra electrons added to 1 in [tex]10^{12}[/tex] atoms:
Number of extra electrons = Number of sulfur atoms / [tex]10^{12}[/tex]
Number of extra electrons = 2.065 × [tex]10^{24 }[/tex] atoms / [tex]10^{12}[/tex]≈ 2.065 × [tex]10^{12}[/tex]extra electrons
Finally, we'll convert the number of extra electrons to coulombs. The elementary charge of an electron is approximately 1.602 × [tex]10^{(-19)} ^[/tex]coulombs:
Net charge in coulombs = Number of extra electrons × Elementary charge
Net charge in coulombs ≈ 2.065 × [tex]10^{12}[/tex] extra electrons × 1.602 × [tex]10^{(-19)} ^[/tex] C ≈ 3.311 × [tex]10^{(-7)}[/tex] C
Therefore, the net charge on the piece of sulfur would be approximately 3.311 × [tex]10^{(-7)}[/tex]coulombs.
To know more about sulfur refer here
https://brainly.com/question/34373942#
#SPJ11
The hypothetical compound X has molar mass 84.91 g/mol and vapor pressure of 565 mmHg at 24°C. 50.0 g of coumpound X are introduced in a 15.0 L evacuated flask, sealed and left to rest until the liquid reaches equilibrium with its vapor phase. What will the mass of the liquid be once equilibrium is reached?
Answers
Answer:We can use the ideal gas law and the definition of vapor pressure to solve this problem.
First, we need to convert the vapor pressure from mmHg to atm:
565 mmHg = 0.743 atm
Next, we can use the ideal gas law to calculate the number of moles of gas in the flask:
PV = nRT
n = PV/RT
n = (0.743 atm) x (15.0 L) / [(0.08206 L·atm/mol·K) x (297 K)]
n = 0.436 mol
Since the molar mass of compound X is 84.91 g/mol, the mass of the gas in the flask is:
m = n x M
m = 0.436 mol x 84.91 g/mol
m = 37.0 g
Therefore, the mass of the liquid in the flask is:
50.0 g - 37.0 g = 13.0 g
So, the mass of the liquid once equilibrium is reached will be 13.0 g.
learn more about vapor pressure
https://brainly.com/question/29640321?referrer=searchResults
#SPJ11
A 50. 0 ml sample of gas is cooled from 119° C. If the pressure remains constant, what is the final volume of the gas?
Answers
To use Charles's Law, which states that at constant pressure, the volume of a gas is directly proportional to its temperature. Mathematically, Charles's Law can be expressed as V₁ / T₁ = V₂ / T₂
Where V₁ and T₁ are the initial volume and temperature of the gas, and V₂ and T₂ are the final volume and temperature of the gas, respectively. In this case, we are given that the initial volume (V₁) is 50.0 mL and the initial temperature (T₁) is 119°C. We need to find the final volume (V₂), but we don't have the final temperature (T₂) explicitly mentioned.
However, we are told that the pressure remains constant. When pressure is held constant, the ratio of volumes is directly proportional to the ratio of temperatures. Therefore, we can set up the following equation:
V₁ / T₁ = V₂ / T₂
Plugging in the known values:
50.0 mL / 119°C = V₂ / T₂
Now, we can solve for V₂ by rearranging the equation:
V₂ = (50.0 mL / 119°C) * T₂
Since we don't have the specific final temperature, we cannot calculate the final volume without additional information about the final temperature of the gas.
Learn more about Charles's Law here
https://brainly.com/question/14842720
#SPJ11
Use the octet rule to predict the number of bonds C, P, S, and Cl are likely to make in a molecule.a. four, four, three, three, respectively b. three, three, two, two, respectively c. four, one, one, one, respectively d. four, three, two, one, respectively
Answers
The correct predictions for the number of bonds C, P, S, and Cl are likely to make in a molecule are four, four, two, and three, respectively.
The octet rule is a chemical principle that states atoms tend to bond in such a way that they achieve a stable configuration of eight electrons in their outermost shell. Based on this principle, we can predict the number of bonds that C, P, S, and Cl are likely to make in a molecule.
Carbon (C) has four valence electrons and therefore tends to form four covalent bonds to complete its octet. Hence, option A is correct, which states that C is likely to make four bonds in a molecule.
Phosphorus (P) has five valence electrons and needs three more electrons to complete its octet. Therefore, P is likely to form three covalent bonds, as mentioned in option A.
Sulfur (S) has six valence electrons and requires two more electrons to complete its octet. Thus, S is likely to form two covalent bonds. Therefore, option D is incorrect, and option B, which predicts that S is likely to make two bonds, is correct.
Finally, Chlorine (Cl) has seven valence electrons and requires only one more electron to achieve a stable octet. Therefore, Cl is likely to form one covalent bond, and the correct answer is option A, which predicts that Cl will make three bonds.
In conclusion, the correct predictions for the number of bonds C, P, S, and Cl are likely to make in a molecule are four, four, two, and three, respectively.
To know more about molecule visit:
brainly.com/question/19556990
#SPJ11
for the formation of your photchromic imine you use ammonium bromide. why? 2 reasons.
Answers
The use of ammonium bromide in the formation of photchromic imine has two main reasons: To increase the solubility of the imine: Photchromic imine is not very soluble in common solvents such as water or ethanol. However, the addition of ammonium bromide to the reaction mixture increases the solubility of the imine.
2. To catalyze the formation of the imine: Ammonium bromide also acts as a catalyst in the formation of the photchromic imine. This means that it speeds up the reaction between the amine and the aldehyde to form the imine. This is due to the fact that ammonium bromide can protonate the amine, making it more reactive towards the aldehyde. Additionally, the bromide ion can act as a nucleophile, attacking the carbonyl group of the aldehyde and facilitating the formation of the imine.
In summary, the use of ammonium bromide in the formation of photchromic imine is necessary to increase the solubility of the imine and catalyze the reaction between the amine and aldehyde.
To know more about ammonium bromide visit:-
https://brainly.com/question/31817489
#SPJ11
A power plant uses 54 million Joules of chemical energy to produce 17 million Joules of electrical energy. What is the efficiency of this process
Answers
the efficiency of the process is approximately 31.48%. To calculate the efficiency of the power plant, we need to divide the output energy (electrical energy) by the input energy (chemical energy) and multiply the result by 100 to express it as a percentage.
Efficiency = (Output Energy / Input Energy) * 100
Given that the power plant produces 17 million Joules of electrical energy (output) using 54 million Joules of chemical energy (input), we can substitute these values into the formula:
Efficiency = (17 million J / 54 million J) * 100
Simplifying the expression:
Efficiency = (0.3148) * 100
Efficiency = 31.48%
Therefore, the efficiency of the process is approximately 31.48%. This means that around 31.48% of the input chemical energy is converted into useful electrical energy, while the remaining percentage is lost as waste heat or other forms of energy.
To learn more about percentage click here:brainly.com/question/30697911
#SPJ11
The release of carbon dioxide from the complete oxidation of pyruvate can pose problems for cells. What molecule can easily be formed from carbon dioxide that can serve as a one carbon donor and double as a biological buffer? A. Biotin B Acetate C. Glyceraldehyde 3-phosphate D. Glycine E. Bicarbonate
Answers
The molecule that can easily be formed from carbon dioxide and serve as a one-carbon donor while also doubling as a biological buffer is bicarbonate (E).
Bicarbonate (HCO3-) can accept a proton (H+) to become the weak acid carbonic acid (H2CO3), which can then dissociate into water and carbon dioxide (CO2).
Bicarbonate is an important component of the carbon dioxide-bicarbonate buffer system, which helps to maintain the pH of biological fluids.
Additionally, one-carbon groups can be transferred to tetrahydrofolate (THF) to form various intermediates in pathways such as nucleotide biosynthesis and amino acid metabolism.
To know more about molecule refer here
https://brainly.com/question/19922822#
#SPJ11
how many of the following ab3 molecules and ions have a trigonal pyramidal molecular geometry: nf3, bcl3, ch3– , and sf3 ? 3 4 2 0 1
Answers
To determine which molecules and ions have a trigonal pyramidal molecular geometry, we need to first understand what a trigonal pyramidal shape looks like.
A trigonal pyramidal shape is characterized by a central atom bonded to three other atoms and one lone pair of electrons. This results in a distorted tetrahedral shape with a bond angle of approximately 107 degrees.
Now, let's analyze each of the given molecules and ions:
1. NF3: This molecule has a trigonal pyramidal shape. Nitrogen is bonded to three fluorine atoms and has one lone pair of electrons.
2. BCl3: This molecule has a trigonal planar shape. Boron is bonded to three chlorine atoms and has no lone pairs of electrons.
3. CH3-: This ion has a trigonal pyramidal shape. Carbon is bonded to three hydrogen atoms and has one lone pair of electrons.
4. SF3: This molecule has a trigonal pyramidal shape. Sulfur is bonded to three fluorine atoms and has one lone pair of electrons.
Therefore, the answer is that two molecules and one ion have a trigonal pyramidal molecular geometry. NF3, CH3-, and SF3 all have a trigonal pyramidal shape. BCl3 does not have a trigonal pyramidal shape, as it has a trigonal planar shape.
For more such questions on molecules
https://brainly.com/question/24191825
#SPJ11
There are two molecules and ions that have a trigonal pyramidal molecular geometry among nf3, bcl3, ch3– , and sf3.
NF3 and NH3 are examples of molecules that have a trigonal pyramidal molecular geometry. In these molecules, there are three bond pairs and one lone pair of electrons around the central atom. This geometry is determined by the VSEPR theory, which predicts the molecular shape based on the electron pairs surrounding the central atom. The bond angles in a trigonal pyramidal molecule are slightly less than 109.5 degrees due to the lone pair-bond pair repulsion. BCl3 and SF3 have a trigonal planar molecular geometry with bond angles of 120 degrees, while CH3- has a tetrahedral geometry.
learn more about VSEPR here
brainly.com/question/31162132?
#SPJ11
Consider the following system at equilibrium where Kc = 9.52×10-2 and H° = 18.8 kJ/mol at 350 K. CH4 (g) + CCl4 (g) goes to 2 CH2Cl2 (g) The production of CH2Cl2 (g) is favored by: Indicate True (T) or False (F) for each of the following: 1. decreasing the temperature. 2. decreasing the pressure (by changing the volume). 3. increasing the volume. 4. removing CH2Cl2 . 5. removing CCl4 .
Answers
(1) decreasing the temperature- True, (2)decreasing the pressure (by changing the volume)-False, (3) increasing the volume-True, (4) removing CH2Cl2-False, (5) removing CCl4-False
According to Le Chatelier's principle, if a system at equilibrium is subjected to a change, the system will adjust to reestablish the equilibrium. The production of CH2Cl2 (g) is favored by decreasing the temperature and increasing the volume, and is disfavored by decreasing the volume, removing CH2Cl2, and removing CCl4.
1. True - Decreasing the temperature will shift the equilibrium towards the side with higher enthalpy, which in this case is the production of CH2Cl2 (g).
2. False - Decreasing the pressure (by changing the volume) will cause the system to shift towards the side with a higher number of moles, which in this case is the reactant side. Therefore, it will not favor the production of CH2Cl2 (g).
3. True - Increasing the volume will decrease the pressure and cause the system to shift towards the side with a higher number of moles, which in this case is the production of CH2Cl2 (g).
4. False - Removing CH2Cl2 will cause the system to adjust by producing more CH2Cl2 to reestablish the equilibrium, so it will not favor the production of CH2Cl2 (g).
5. False - Removing CCl4 will cause the system to adjust by producing more CCl4 to reestablish the equilibrium, so it will not favor the production of CH2Cl2 (g).
In summary, the production of CH2Cl2 (g) is favored by decreasing the temperature and increasing the volume, while it is disfavored by decreasing the volume, removing CH2Cl2, and removing CCl4.
To know more about equilibrium visit:
https://brainly.com/question/14186148
#SPJ11
convert the following compound to 1−hexyne, hc≡cch2ch2ch2ch3. be sure to answer all parts.
Answers
A triple bond between the terminal and adjacent carbons, and add a methyl group to the other end of the chain. The final structure is hc≡cch2ch2C≡CH.
To convert hc≡cch2ch2ch2ch3 to 1-hexyne, we need to replace the terminal methyl group with a triple bond.
Identify the terminal carbon in hc≡cch2ch2ch2ch3. This is the carbon at the end of the chain, which is attached to the methyl group.
Remove the methyl group from the terminal carbon. This will leave us with hc≡cch2ch2ch2-.
Add a triple bond between the terminal carbon and the adjacent carbon. This will convert hc≡cch2ch2ch2- to hc≡cch2ch2C≡C.
Add a methyl group to the other end of the chain to complete the molecule. This will give us 1-hexyne, which has the structure hc≡cch2ch2C≡CH.
In summary, to convert hc≡cch2ch2ch2ch3 to 1-hexyne, we need to remove the methyl group from the terminal carbon, add a triple bond between the terminal and adjacent carbons, and add a methyl group to the other end of the chain. The final structure is hc≡cch2ch2C≡CH.
Learn more about triple bond
brainly.com/question/19331363
#SPJ11
A power plant uses a 1,029 kelvin boiler and a river at 314 kelvin for cooling. what is the heat engine efficiency (in percent) of this power plant? use exact numbers; do not estimate.
Answers
The heat engine efficiency of the power plant is 35.4% (to the nearest tenth of a percent).
The efficiency of a heat engine is given by the formula:
η = 1 - (T_c / T_h)
where η is the efficiency, T_c is the temperature of the cold reservoir (in Kelvin), and T_h is the temperature of the hot reservoir (in Kelvin).
In this case, the boiler temperature is T_h = 1029 K and the river temperature is T_c = 314 K. Substituting these values into the formula gives:
η = 1 - (314 K / 1029 K) = 1 - 0.305 = 0.695
Multiplying this by 100 to express the result as a percentage gives an efficiency of 69.5%. However, since the question asks for the answer using exact numbers without estimation, we must keep all the significant figures in the calculation. Therefore, the efficiency is 0.695, which when multiplied by 100 and rounded to the nearest tenth of a percent gives an efficiency of 35.4%.
learn more about Heat engine here:
https://brainly.com/question/31789438
#SPJ11
calculation of cu2 usiing measured cell potentialand the nernst equation
Answers
To calculate the concentration of Cu²⁺ in a solution using a measured cell potential and the Nernst equation, we need to know the standard reduction potential of the Cu²⁺/Cu couple, as well as the measured cell potential and the concentrations of the other species in the cell.
Assuming the standard reduction potential of the Cu²⁺/Cu couple is +0.34 V at 25°C, we can use the Nernst equation, Ecell = E°cell - (RT/nF)lnQ, to relate the measured cell potential to the concentration of Cu²⁺.
If the cell is a Cu²⁺/Cu half-cell and a reference hydrogen half-cell, and the measured cell potential is 0.62 V at 25°C, then we can write:
0.62 V = 0.34 V - (0.0257 V/K)(298 K)/(2)(96,485 C/mol)ln[Cu²⁺]
Solving for [Cu²⁺], we get:
[Cu²⁺] = 1.5 x 10⁻⁴ M
Therefore, the concentration of Cu²⁺ in the solution is approximately 1.5 x 10⁻⁴ M. Learn more about electrochemistry and the Nernst equation at
https://brainly.com/question/13043546
#SPJ11
hwat are the equilibriu concnetreation of mg and co3 ions in a sturate solution of magnesiu crabonte at 25c? ksp = 3.5x10-8
Answers
The equilibrium concentration of Mg2+ and CO32- ions in a saturated solution of magnesium carbonate at 25°C is approximately 1.87x10^-4 M.
The balanced chemical equation for the dissolution of magnesium carbonate in water is:
MgCO3(s) ⇌ Mg2+(aq) + CO32-(aq)
The solubility product expression for magnesium carbonate is:
Ksp = [Mg2+][CO32-]
We can assume that the dissolution of magnesium carbonate in water is an equilibrium reaction, which means that the concentrations of the magnesium and carbonate ions in the solution are related to the solubility product constant by the following equation:
Qsp = [Mg2+][CO32-]
At equilibrium, Qsp = Ksp. Therefore:
Ksp = [Mg2+][CO32-] = 3.5x10^-8
Since magnesium carbonate is a strong electrolyte, we can assume that the concentration of Mg2+ ion is equal to the concentration of MgCO3 that dissolves. Let x be the equilibrium concentration of Mg2+ and CO32- ions in the solution. Therefore, we can write:
Ksp = [Mg2+][CO32-] = x^2
x = sqrt(Ksp) = sqrt(3.5x10^-8) = 1.87x10^-4 M
Click the below link, to learn more about Equilibrium Concentration:
https://brainly.com/question/16645766
#SPJ11
Arrange the following compounds in order of decreasing acidity: Rank from most acidic to least acidic: To rank items a5 equivalent; overlap them: Reset Help CH3C = CH CH,COOH CHzNHz CH,CHz CH;SOzH CHzSH CH;OH Most acidic Least acidic The correct ranking cannot be determined
Answers
The correct ranking cannot be determined. to determine the acidity of a compound, we need to compare the stability of the corresponding conjugate bases. However, the given compounds belong to different functional groups, and their corresponding conjugate bases differ in structure and stability.
Therefore, we cannot directly compare their acidities. Additionally, the position of substituents in the molecule can affect the acidity of the compound, making it difficult to determine a clear ranking. Therefore, we cannot establish a definitive ranking of the given compounds based on their acidity.
Learn more about acidity here:
https://brainly.com/question/14072179
#SPJ11
Consider the following system at equilibrium where Kc = 1.20×10-2 and ΔH° = 87.9 kJ/mol at 500K. PCl5(g) <=> PCl3(g) + Cl2(g) The production of PCl3(g) is favored by: (Indicated true (T) or false (F) for each of the following choices) 1. ____ Increasing the temperature 2. __ Increasing the pressure (by changing the volume) 3. _____ Decreasing the volume 4. _____ Adding PCl5 5. ______ Removing Cl2
Answers
1. True Increasing the temperature 2. False Increasing the pressure (by changing the volume) 3. True Decreasing the volume 4. False Adding PCl5 5. True Removing Cl2
1. True - According to Le Chatelier's principle, if the equilibrium constant is small, the forward reaction is endothermic. Therefore, increasing the temperature would shift the equilibrium towards the products, favoring the production of PCl3.
2. False - Changing the pressure by increasing the volume would shift the equilibrium towards the side with more moles of gas. In this case, there is no difference in the number of moles of gas on either side of the equation, so changing the pressure would not affect the equilibrium position.
3. True - Decreasing the volume would increase the pressure, which would favor the side with fewer moles of gas. In this case, there is only one mole of gas on the product side and two moles of gas on the reactant side, so decreasing the volume would favor the production of PCl3.
4. False - Adding more PCl5 would shift the equilibrium towards the side with more PCl5, favoring the production of Cl2 and PCl3.
5. True - Removing Cl2 would shift the equilibrium towards the products, favoring the production of PCl3.
For more such questions on temperature , Visit:
https://brainly.com/question/27988898
#SPJ11
The chemical reaction is PCl5(g) <=> PCl3(g) + Cl2(g)
where Kc = 1.20×10-2 and ΔH° = 87.9 kJ/mol at 500K
The production of PCl3(g) is favored by:
1. T - Increasing the temperature (since ΔH° is positive, the reaction is endothermic, and increasing the temperature will favor the endothermic reaction, thus producing more PCl3(g))
2. F - Increasing the pressure (by changing the volume) (this will favor the side with fewer moles of gas, which is the PCl5 side)
3. F - Decreasing the volume (this also increases the pressure, favoring the side with fewer moles of gas, which is the PCl5 side)
4. T - Adding PCl5 (according to Le Chatelier's principle, adding more PCl5 will shift the equilibrium to the right, increasing the production of PCl3(g))
5. T - Removing Cl2 (removing Cl2 will also shift the equilibrium to the right, favoring the production of PCl3(g))
Learn more about Le Chatelier's principle click here:
https://brainly.com/question/29009512
#SPJ11
which of the actions would cause the molecules of a gas to get closer together?
Answers
Cooling the gas or increasing the pressure would cause the molecules of a gas to get closer together. The behavior of a gas can be explained using the kinetic molecular theory.
The Kinetic Molecular Theory provides a theoretical framework to understand the behavior of gases at the molecular level. According to this theory, gases consist of a large number of small particles (molecules or atoms) that are in constant random motion. These particles collide with each other and with the walls of the container in which the gas is contained.
When the pressure of a gas is increased, it means that more particles are contained in a given volume, and therefore, there are more collisions happening between the particles and with the walls of the container.
These collisions result in an increased force per unit area, which is what we measure as pressure. As the particles get closer together, the volume they occupy decreases, and the density of the gas increases.
Similarly, cooling a gas means that the particles have less kinetic energy and move more slowly. The particles' slower motion results in fewer collisions with the walls of the container, and the pressure decreases.
To know more about molecules, refer here:
https://brainly.com/question/1078183#
#SPJ11
Calculate the [OH-] of each of the following solutions at 25°C. Identify each solution as neutral, acidic, or basic. Also calculate the pH and pOH of each of these solutions. a. [H+] = 1.0 x 10-7 M [OH-]= M The solution is pH = pOH = b. H+] = 8.3 x 10-16 M [OH]= M The solution is pH pOH =
Answers
To calculate the [OH-] of the given solutions, we can use the formula [H+][OH-] = 1.0 x 10^-14 (at 25°C). Using this formula, we can determine the [OH-] for each solution:
a. [H+] = 1.0 x 10^-7 M
[OH-] = 1.0 x 10^-14 / 1.0 x 10^-7 = 1.0 x 10^-7 M
Since [H+] and [OH-] are equal, the solution is neutral.
pH = -log[H+] = -log(1.0 x 10^-7) = 7
pOH = -log[OH-] = -log(1.0 x 10^-7) = 7
b. [H+] = 8.3 x 10^-16 M
[OH-] = 1.0 x 10^-14 / 8.3 x 10^-16 = 1.2 x 10^-9 M
Since [H+] < [OH-], the solution is basic.
pH = -log[H+] = -log(8.3 x 10^-16) = 15.08
pOH = -log[OH-] = -log(1.2 x 10^-9) = 8.92
In summary, the [OH-] of the first solution is 1.0 x 10^-7 M and it is neutral with a pH and pOH of 7. The [OH-] of the second solution is 1.2 x 10^-9 M and it is basic with a pH of 15.08 and a pOH of 8.92.
To know more about solutions visit:
https://brainly.com/question/30665317
#SPJ11
How many grams of NH4HCO3 are equivalent to 2. 8 moles of NH4HCO3?
Answers
2.8 moles of NH4HCO3 is equivalent to approximately 222.39 grams of NH4HCO3.
To determine the grams of NH4HCO3 equivalent to 2.8 moles, we use the molar mass of NH4HCO3, which is approximately 79.056 g/mol.
The molar mass represents the mass of one mole of a substance. By multiplying the molar mass by the number of moles, we can calculate the corresponding mass in grams.
Grams = Moles * Molar Mass
Plugging in the given values:
Grams = 2.8 moles * 79.056 g/mol
Grams ≈ 221.3568 g
Rounding to the appropriate number of significant figures, we find that approximately 221.36 grams of NH4HCO3 are equivalent to 2.8 moles of NH4HCO3..
To learn more about molar mass click here
brainly.com/question/12127540
#SPJ11
determine the mass of potassium in 34.8 g of ki .
Answers
The mass of Potassium in 34.8 g of Potassium Iodide is 8.20g.
To determine the mass of potassium (K) in 34.8 g of potassium iodide (KI), we can use the concept of molar mass and stoichiometry.
First, calculate the molar mass of KI, which is the sum of the molar masses of potassium (K) and iodine (I). Potassium has a molar mass of 39.10 g/mol, and iodine has a molar mass of 126.90 g/mol. The molar mass of KI is 39.10 g/mol + 126.90 g/mol = 166.00 g/mol.
Next, we can find the moles of KI in the given mass. Moles of KI = (34.8 g) / (166.00 g/mol) = 0.2096 moles.
Since the ratio of potassium to iodide in KI is 1:1, there are also 0.2096 moles of potassium present. Now, we can find the mass of potassium by multiplying the moles of potassium by its molar mass:
Mass of potassium (K) = (0.2096 moles) x (39.10 g/mol) = 8.1976 g
So, there are approximately 8.20 g of potassium in 34.8 g of potassium iodide (KI).
Know more about Molar mass here:
https://brainly.com/question/22997914
#SPJ11
This is the term used to characterize a group on a benzene that makes it more reactive.a. Aromaticb. Electron donating groupc. Electron Withdrawing groupd. Aliphatic
Answers
The term used to characterize a group on a benzene that makes it more reactive is "Electron Withdrawing Group" (EWG).
EWGs are typically characterized by their ability to withdraw electron density from the ring, which can make the benzene ring more susceptible to electrophilic attack.
Examples of EWGs include nitro (-NO2), carbonyl (-C=O), and cyano (-CN) groups.
To know more about refer benzene here
brainly.com/question/14525517#
#SPJ11
knowing the following: mp = 1.0073 amu, mn = 1.0087 amu, and me- = 0.00055 amu, calculate the energy released by the fusion of one mole of br-81 (mass = 80.9163 amu)
Answers
Using Einstein's equation, we can calculate the energy released by the fusion of one mole of br-81: E = Delta m * c² * Avogadro's number
E = -1.9885 amu * (2.998 x 10⁸ m/s)² * 6.022 x 10²³/mol
E = -3.17 x 10¹¹ J/mol
To calculate the energy released by the fusion of one mole of br-81, we need to first determine the mass of the products after fusion.
The fusion of br-81 involves the combination of a bromine atom with a hydrogen atom to form krypton-83 and a neutron. The mass of krypton-83 is 82.91413 amu (80.9163 amu + 1.0073 amu + 0.00055 amu) and the mass of the neutron is 1.0087 amu.
Therefore, the total mass of the products after fusion is 83.92283 amu (82.91413 amu + 1.0087 amu).
To calculate the energy released by fusion, we can use the famous Einstein's equation E = mc², where E is the energy, m is the mass, and c is the speed of light.
The change in mass during fusion is given by the difference between the mass of the reactants (br-81 and hydrogen) and the mass of the products (krypton-83 and neutron), which is:
Delta m = (mass of reactants) - (mass of products)
Delta m = (80.9163 amu + 1.0073 amu) - (82.91413 amu + 1.0087 amu)
Delta m = -1.9885 amu
The negative sign indicates that mass is lost during fusion.
Using Einstein's equation, we can calculate the energy released by the fusion of one mole of br-81:
E = Delta m * c² * Avogadro's number
E = -1.9885 amu * (2.998 x 10⁸ m/s)² * 6.022 x 10²³/mol
E = -3.17 x 10¹¹ J/mol
Note that the negative sign indicates that energy is released during fusion, as expected. The magnitude of the energy released is quite large, which highlights the potential of fusion as a source of energy.
To know more about energy, refer
https://brainly.com/question/13881533
#SPJ11
Balance the following half-reactions by adding the appropriate number of electrons (e"). Then, classify each reaction as an oxidation or reduction half-reaction 1st attempt Part 1 (2 points) Note that for each of the four reactions, one of the gray boxes will be left blank and the other will be filled with electron(s). Use the symbole to represent an electron ____ + Fe2+ (aq) —> Fe3+ (aq) + ___
Choose one: - Oxidation - Reduction Part 2 (2 points)
___ + Agl(s) —> Ag(s) + I- (aq) + ___
Choose one: - Oxidation - Reduction Part 3 (2 points)
___ +VO2+ (aq) + 2H+ (aq) —> VO2+ (aq) +H2O(l) + ___
Choose one: - Oxidation - Reduction
Answers
Oxidation half-reaction: Fe2+ (aq) —> Fe3+ (aq) + 1e- Explaination1: Fe2+ is losing an electron, which means it is undergoing oxidation.
Oxidation half-reaction: VO2+ (aq) + 2H+ (aq) + 1e- —> VO2+ (aq) + H2O(l) Explaination1: VO2+ is losing an electron, which means it is undergoing oxidation. When balancing a redox reaction, it is necessary to add electrons to one side of the equation in order to balance the charges.
The half-reaction that gains electrons is the reduction half-reaction, while the half-reaction that loses electrons is the oxidation half-reaction. In Part 1, Fe2+ is losing an electron and is therefore undergoing oxidation, while in Part 2, I- is gaining electrons and is therefore undergoing reduction. In Part 3, VO2+ is losing an electron and is therefore undergoing oxidation.
To know more about Oxidation visit
https://brainly.com/question/9496279
#SPJ11
A volume of 25.0 mL of 0.100 M HCl is titrated against a 0.100 M CH3NH2 solution added
to it from a burette. Calculate the pH values of the solution (a) after 10.0 mL of CH3NH2 solution
have been added, (b) after 25.0 mL of CH3NH2 solution have been added.
Answers
a) The pH of the solution after 10.0 mL of [tex]CH_3NH_2[/tex] solution have been added is 4.55.
b) The pH of the solution after 25.0 mL of [tex]CH_3NH_2[/tex] solution have been added is 9.10.
When 10.0 mL of 0.100 M [tex]CH_3NH_2[/tex] solution is added to 25.0 mL of 0.100 M HCl solution, a weak base-strong acid titration occurs. At this point, the HCl will be neutralized by the [tex]CH_3NH_2[/tex] solution to form [tex]CH_3NH_3^+[/tex] and Cl-.
The limiting reagent in this reaction is the HCl, so it will be fully consumed first. The excess [tex]CH_3NH_2[/tex] solution will then react with water to form [tex]CH_3NH_3^+[/tex] and OH-.
The pH can be calculated using the Henderson-Hasselbalch equation.
At the equivalence point, the moles of [tex]CH_3NH_2[/tex] = moles of HCl. Therefore, 0.0100 L of HCl contains 0.00250 mol of HCl. After 10.0 mL of [tex]CH_3NH_2[/tex] solution is added, the volume of the solution is 35.0 mL.
Therefore, the concentration of [tex]CH_3NH_2[/tex] solution is (0.0100 L / 0.0350 L) x 0.100 M = 0.0286 M.
Using the Henderson-Hasselbalch equation,
pH = pKa + log([A-]/[HA]),
where pKa of [tex]CH_3NH_2[/tex] is 10.64,
[A-] = [OH-] = 0.00250 mol / 0.0350 L = 0.0714 M, and
[HA] = [[tex]CH_3NH_2[/tex]] - [OH-] = 0.0286 M - 0.00250 mol / 0.0350 L = 0.00071 M.
Therefore, pH = 10.64 + log(0.0714 / 0.00071) = 4.55.
When 25.0 mL of [tex]CH_3NH_2[/tex] solution is added, the volume of the solution becomes 50.0 mL.
At this point, all the HCl in the solution has been neutralized by the [tex]CH_3NH_2[/tex] solution. Further addition of [tex]CH_3NH_2[/tex] solution will cause the solution to become basic.
The excess [tex]CH_3NH_2[/tex] solution will react with water to form [tex]CH_3NH_3^+[/tex] and OH-. The OH- concentration can be calculated by determining the amount of [tex]CH_3NH_2[/tex] that has been added in excess.
At the equivalence point, the moles of [tex]CH_3NH_2[/tex] = moles of HCl. Therefore, 0.0250 L of [tex]CH_3NH_2[/tex]solution contains 0.00250 mol of [tex]CH_3NH_2[/tex]. After adding 25.0 mL of [tex]CH_3NH_2[/tex] solution, the volume of the solution is 50.0 mL.
Therefore, the concentration of [tex]CH_3NH_2[/tex] solution is (0.0250 L / 0.0500 L) x 0.100 M = 0.0500 M.
The amount of[tex]CH_3NH_2[/tex] in excess is 0.00250 mol - 0.00125 mol = 0.00125 mol.
Therefore, the OH- concentration is 0.00125 mol / 0.0500 L = 0.0250 M. The pOH of the solution is 1.60.
Therefore, the pH of the solution is 14.00 - 1.60 = 12.40.
To know more about "pH" refer here:
https://brainly.com/question/30761746#
#SPJ11
Draw structures for the alkene (or alkenes) that gives the following reaction product. Br Br2 2123 Br You do not have to consider stereochemistry . Submit more than one structure only if the structures are constitutional isomers.
Answers
The above structure represents one possible alkene that would give the specified reaction product. Other alkene isomers may also give the same product.
Provide the alkene (or alkene isomers) that would give the product "Br Br2 2123 Br" when reacted with bromine (Br2) without considering stereochemistry?I am unable to generate or provide visual images.
I can describe the reaction and provide you with the structural formula of the alkene that gives the specified reaction product.
When an alkene reacts with Br2 (bromine), it undergoes a halogenation reaction.
In this reaction, one bromine atom adds to each carbon atom of the alkene, resulting in the addition of a Br atom to each carbon and the formation of a vicinal dibromide product.
Based on the given reaction product "Br Br2 2123 Br," it suggests that two bromine atoms have been added to a carbon-carbon double bond, resulting in a vicinal dibromide.
The structural formula of the alkene that would give this product can be represented as follows:
CH2=CH-CH2-CH=CH2
In this structure, the double bond between the second and third carbon atoms is where the bromine atoms would be added to form the vicinal dibromide product.
Learn more about structure represents
brainly.com/question/29692235
#SPJ11
Which ion would you expect to have the largest crystal field splitting delta ?
a. [Os(H2O)6]^2
b. [Os(CN)6]^3 c. [Os(CN)6]^4- d. [Os( H2O)6]^3+
Answers
[Os(CN)6]^3- is expected to have the largest CFS delta.
Crystal field splitting (CFS) is a phenomenon that occurs when transition metal ions are surrounded by ligands, resulting in the splitting of the degenerate d-orbitals into higher and lower energy levels. The size of the splitting is measured by delta (Δ), which is influenced by the electronic configuration and the identity of the ligands. The ligands' ability to cause a larger splitting is known as the spectrochemical series. The stronger the field of the ligand, the higher the CFS. Among the given ions, [Os(CN)6]^3- is expected to have the largest crystal field splitting delta. This is because cyanide (CN-) is a strong field ligand, and Os has a 5d^2 electronic configuration. The Os atom has seven d-electrons, and it has a formal charge of +3, making it more polarizable than the other Os ions. As a result, the electrons are pulled closer to the ligands, causing a greater splitting between the d-orbitals. Thus, [Os(CN)6]^3- is expected to have the largest CFS delta.
To know more about crystal field splitting visit: https://brainly.com/question/28304987
#SPJ11
Looking at the nickel complexes as an example, it is found that those formed with ammonia give the complex [Ni(NH3)6]^2+ and when formed with ethylenediamine the complex [Ni(en)3)^2+ is the result. Even though both are octahedran complexes, why do you think that nickel is coordinated with six ammonia ligands in one case and only three ethylenediamine ligands in the other?
Answers
The coordination number (i.e. the number of ligands attached to the central metal ion) in a complex depends on a variety of factors, including the size of the ligand, its charge, its shape, and its ability to form stable bonds with the metal ion.
In the case of nickel complexes, the difference in coordination number between [Ni(NH3)6]^2+ and [Ni(en)3]^2+ can be attributed to the differences in the size and shape of the ligands.
Ammonia (NH3) is a relatively small and flexible ligand, with a lone pair of electrons that can form a coordinate bond with the nickel ion.
Because of its small size and flexibility, ammonia can approach the nickel ion from many different angles and can occupy all six of the available coordination sites around the nickel ion. This results in an octahedral complex with a coordination number of 6.
Ethylenediamine (en), on the other hand, is a larger and more rigid ligand, with two nitrogen atoms separated by a carbon chain.
Because of its larger size and rigid structure, ethylenediamine cannot approach the nickel ion from as many angles as ammonia, and it can only form three coordinate bonds with the nickel ion. This results in an octahedral complex with a coordination number of 3.
In summary, the difference in coordination number between [Ni(NH3)6]^2+ and [Ni(en)3]^2+ can be attributed to the differences in the size and shape of the ligands, which affect their ability to approach the central metal ion and form stable coordinate bonds.
To know more about number refer here
https://brainly.com/question/17429689#
#SPJ11
calculate the mass percent of nickel chlorate in a solution made by dissolving 0.265 g ni(clo3)2 in 10.00 g water
Answers
The mass percent of nickel chlorate in the solution is 2.57%. to calculate the mass percent, you first need to find the mass of the solution. The mass of the solution is the sum of the mass of nickel chlorate and the mass of water, which is 0.265 g + 10.00 g = 10.265 g.
Next, you can calculate the mass of nickel chlorate in the solution by subtracting the mass of water from the total mass of the solution: 10.265 g - 10.00 g = 0.265 g.
Finally, the mass percent of nickel chlorate can be calculated by dividing the mass of nickel chlorate by the total mass of the solution and multiplying by 100: (0.265 g / 10.265 g) x 100 = 2.57%.
Therefore, the mass percent of nickel chlorate in the solution is 2.57%.
Learn more about chlorate here:
https://brainly.com/question/20758434
#SPJ11