Write the chemical equation that the diagram

represents.

A  positive correlation does not necessarily indicate a causal link, and a negative correlation does not necessarily indicate a causal link; option A.

A correlation is a relationship that exists between two variables.

A positive correlation indicates a direct relationship while a negative correlation shows an inverse relationship.

However, a positive correlation does not necessarily indicate a causal link, and a negative correlation does not necessarily indicate a causal link.

In conclusion, a correlation indicates a relationship between two values.

Learn more about correlation at: https://brainly.com/question/4219149

#SPJ1

If your client receives a letter from SilverScript requesting proof of Creditable Coverage, they can ignore the letter is a false statement

Creditable coverage is known to be a form of an health insurance, that consist of prescription drug and also other kinds of health benefit plan that is known to meets  the minimum amount of qualifications.

Note that  the types of creditable coverage plans are group and individual health plans, student health plans,  and others.

It is not right to ignore any letter sent to you concerning the case above as it may be vital and as such, the statement of If your client receives a letter from SilverScript requesting proof of Creditable Coverage, and the client has already submitted proof of creditable coverage with the enrollment application, they can ignore the letter is a wrong/false statement.

Learn more about Creditable Coverage from

https://brainly.com/question/14547867

#SPJ1

Answer:

The removal of one or more electrons from a neutral atom results in a cation.

Explanation:

When you remove electrons from a neutral atom, the atom becomes more positive. Electrons have a negative charge and the protons inside of the nucleus have a positive charge. When electrons are removed, the positive charges from the protons outweigh the negative charges. This results in a positively charged atom, called a cation.

The Neutral Gator program used methods that reduced the amount of carbon dioxide already in the atmosphere and also helps in decreased production of carbon dioxide.

The rate of CO2 increase is in the last few hundred years is 10 times more with the rate of increase (or decrease, for that matter) in the preceding 400,000 years.

There are many possible reasons for this cause , some primary factors are listed below:

Learn more about green house effect here...

brainly.com/question/19521661

#SPJ1

The equilibrium pressure of [tex]H_{2}[/tex] is 288 torr. and [tex]K_{p}[/tex] for this reaction is 0.786 atm.

from the reaction:-        [tex]2AsH_{3}[/tex] ⇄ [tex]2As + 3H_{2}[/tex]

initial concentration     392 torr.              0

at equilibrium.              392 - [tex]2x[/tex].               [tex]3x[/tex]

and the final pressure in the flask = 488 torr.

Hence,

[tex]( 392 - 2x ) + 3x = 488\\ x = 488-392\\x = 96 torr.[/tex]

The partial  pressure of [tex]H_{2}[/tex] is 3 × 96 =  288 torr.

and [tex]AsH_{3}[/tex] is 392 - ( 2 × 96 ) = 392 - 192 = 200 torr.

Now, to find [tex]K_{p}[/tex] for this reaction, we will use [tex]K_{p} = \frac{(P_{H_{2} })^{2} }{( P_{AsH_{3} } )^{2}}[/tex]

putting all the values, we get,

[tex]K_{p} = \frac{(288)^{3} }{(200)^{2} }[/tex]

     = 597.1968 torr.

     = 0.786 atm.  ( 1 atm = 760 torr. )

what do you mean by equilibrium?

Equilibrium in chemistry is the phase that exists when a chemical reaction and its opposite reaction happen at the same rates. This word's Latin origin dates back to the prefix aequi-, which means equal, and lbra, that indicates scale or balance.

Learn more about equilibrium reaction here:-

https://brainly.com/question/15118952

#SPJ4

Pure liquids and solids at the equilibrium stage:

Pure solids and pure liquids are not included in expressions for the equilibrium constant of heterogeneous equilibria since their concentrations are constant across time. Therefore, including it in our equilibrium expression is not significant.

Equilibrium expression:

When a certain chemical reaction is in equilibrium, the rates of the forward and backward reactions are equal, which means that there is no net change in the concentrations of the reactants and products and that the reaction mixture's composition does not change.

The concentration of solid and liquid:

Solid or liquid concentration,

= No. of Moles/ Volume in L

= Mass/(Volume × molar mass)

= Density/ Molar mass

Pure solids and liquids have constant densities and molar masses at a constant temperature.

Because of this, they have constant molar concentrations, which means that they are not considered in the equilibrium constant for a heterogeneous reaction.

Learn more about the pure solids, liquids, and heterogenous mixture here,

https://brainly.com/question/1811148

#SPJ4

Answer:

Can you be more clear with your question

Answer:

Option (2)

Explanation:

Since the amount of each sample is the same, we are looking for the metal with the greatest density, which is copper.

The energy profile representing the reaction of the formation of NO2  is energy profile B; option D.

An energy profile diagram is a diagram which illustrates in the form of a graph the energy changes that occur as reactant molecules react to form products.

An energy profile has energy of the molecules plotted on the y-axis and the reaction pathway or the reaction progress on the x-axis.

The shape of an energy profile depends on whether the reaction is an endothermic or exothermic reaction.

An exothermic reaction will have the energy of reactants higher than that of products, whereas an endothermic reaction will have the energy of products higher than the reactants.

The formation of NO2 is an endothermic reaction which requires 33.1kJ/mol of energy to complete.

Therefore, the energy profile representing the reaction is energy profile B.

In conclusion, an energy profile diagram shows energy changes that occur in a reaction graphically.

Learn more about energy profile at: https://brainly.com/question/1041883

#SPJ1

To learn more about transfer of heat visit:

https://brainly.com/question/13433948

#SPJ4

According to the available literature, standard nanoparticle (NP) production processes make it especially challenging to reach the catalytically important and highly complicated intermetallic -brass crystal structure.

We present a straightforward and logical method for obtaining this phase in M-Zn (M = Pd, Cu, Ni) systems as silica-supported single-phase nanocrystals. This hybrid technique begins with the synthesis of supported M/SiO2 using typical methods (dry impregnation and strong electrostatic adsorption), followed by several hours of heating to high temperatures in the presence of a stoichiometric quantity of metallic Zn in an evacuated closed system.

Pd-Zn is by far the most common in catalytic applications and produces the smallest particle size (8 nm). We investigated the effect of various synthesis parameters on phase purity and particle size distribution in the case of synthesized -brass Pd-Zn/SiO2 supported catalysts and provided general guidelines for synthesis optimization.

Pd/SiO2 is transformed to -brass Pd-Zn/SiO2, resulting in a precipitous drop in CO adsorption and a 25 kJ/mol increase in the ethylene hydrogenation barrier, indicating that the catalytic active sites are significantly modified as a result of alloying. We anticipate that these catalysts will find use in a variety of Pd-catalyzed chemistries.

To learn more about Nanoparticles  from the given link

https://brainly.com/question/16929122

#SPJ4

Use of thermostat is the most effective way to keep the reaction at a control temperature.

The reaction takes place in a thermostat is the most effective way to keep the reaction at a controlled and steady temperature because thermostat regulates the temperature of that solution which is placed in it. If the temperature goes higher then the extra heat is released from the system.

So we can conclude that use of thermostat is the most effective way to keep the reaction at a control temperature.

Learn more about temperature here: https://brainly.com/question/24746268

#SPJ1

Explanation:

However if the two atoms have different affinities for electrons, or electronegativities, then the electrons are more likely to be found closer to the more electronegative atom. In this case, the more electronegative atom gains a partial negative charge, while the less electronegative atom becomes partially positive.

hope it helps please mark me brainlist if you are satisfied with the answer

If a non-volatile sugar is  added to water , the vapor pressure of liquid will tend to decreases and this reduction of vapor pressure is said to be proportional to the numbers of mole fraction of solute that was added to it.

In the case above,  the vapor pressure of the solution is known to be lowered if compared to the vapor pressure of the pure solution.

Therefore if a non-volatile solute is said to be place or added to a pure solution such as water, the vapor pressure of the solution will be reduced than that of the pure solution.

Hence, the statement that If a non-volatile sugar is  added to water , the vapor pressure of liquid will tend to decreases and this reduction of vapor pressure is said to be proportional to the numbers of mole fraction of solute that was added to it is correct.

Learn more about non-volatile solute from

https://brainly.com/question/1408304

#SPJ1

According to the Planck-Einstein relation, the energy of a photon emitted with a wavelength of 448 nm is 4.44 × 10⁻¹⁹ J.

A photon is a particle representing a quantum of light or other electromagnetic radiation. A photon carries energy proportional to the radiation frequency but has zero rest mass.

A photon is emitted with a wavelength (λ) of 448 nm. Given the speed of light (c) is 3.00 × 10⁸ m/s, we can calculate the frequency (ν) of the photon using the following expression.

ν = c/λ

ν = (3.00 × 10⁸ m/s ) / (4.48 × 10⁻⁷ m) = 6.70 × 10¹⁴ s⁻¹

We will use the Planck-Einstein relation, being Planck's constant h = 6.63 × 10⁻³⁴ J.s.

E = h × ν

E = (6.63 × 10⁻³⁴ J.s) × (6.70 × 10¹⁴ s⁻¹) = 4.44 × 10⁻¹⁹ J

According to the Planck-Einstein relation, the energy of a photon emitted with a wavelength of 448 nm is 4.44 × 10⁻¹⁹ J.

Learn more about photons here: https://brainly.com/question/15946945

#SPJ1

The volume of [tex]NH_3[/tex] that will be produced is 2.4 liters. The correct option is 2.

The equation of the reaction goes thus: [tex]N_2 + 3H_2 --- > 2NH_3[/tex]

The ratio of H2 to NH3 is 3:2.

Thus, with 3.6 L of H2, the volume of NH3 that will be produced is:

                     2/3 x 3.6 = 2.4 liters.

More on volume ratios can be found here: https://brainly.com/question/7071992

#SPJ1

An example of investigating an intensive property is determining if a rock is magnetic. That is option C.

Intensive property is defined as the property of a substance that doesn't rely on the amount of the substance.

Examples of Intensive property include:

Learn more about magnetic properties here:

https://brainly.com/question/14411049

#SPJ1

Red curve shows the course of the reaction in the presence of an enzyme. Line a represents the activation energy for that reaction.

Hence, Option (iv) is correct answer.

Activation energy is the minimum energy required an input of energy to initiate the reaction.

[tex]k = Ae^{\frac{-E_a}{RT}}[/tex]

where,

k = rate constant

A = pre-exponential factor

Eₐ = activation energy

R = universal gas constant

T = absolute temperature (in K)

Activation energy = Threshold energy - Energy of colliding molecule.

Thus from the above conclusion we can say that Red curve shows the course of the reaction in the presence of an enzyme. Line a represents the activation energy for that reaction.

Hence, Option (iv) is correct answer.

Learn more about the Activation Energy here: https://brainly.com/question/1380484

#SPJ4

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: This graph illustrates the course of a chemical reaction with and without an enzyme. While the products and reactants are the same, the presence of an enzyme changes the amount of energy required for the reaction to begin.

Part A - Interpreting the graph

Which curve shows the course of the reaction in the presence of an enzyme--the black curve or the red curve? Which line represents the activation energy for that reaction--a, b, or c?

(i) a black curve; line a

(ii) black curve; line b

(iii) black curve; line c

(iv) red curve; line a

(v) red curve; line b

(vi) red curve; line c

Answer:

B.) Na₂SO₄

Explanation:

Covalent bonds are bonds which involve electrons being shared between two atoms. These bonds only occur between nonmetals.

Ionic bonds are bonds which involve electrons being given or taken by two atoms. These bonds form between a metal and a nonmetal.

NH₃ contains nitrogen and hydrogen, two nonmetals. Therefore, this molecule only contains covalent bonds.

Na₂SO₄ has both covalent and ionic bonds. The covalent bonds are found within the polyatomic ion, SO₄²⁻. Sulfur and oxygen are both nonmetals, thus covalently combining. The ionic bond forms between the  Na⁺ and SO₄²⁻. Sodium (Na) is a metal which wishes to give up electrons to have a complete octet. SO₄²⁻ serves as the anion which it bonds with.

CH₃COOH contains hydrogen, carbon, and oxygen. All of these are nonmetals, thus the only bonds formed are covalent.

NaCl contains sodium, a metal, and chlorine, a nonmetal. Therefore, this compound is held together by an ionic bond.

Answer:

561 g P₂O₃

Explanation:

To find the mass of P₂O₃, you need to (1) convert moles H₃PO₃ to moles P₂O₃ (via mole-to-mole ratio from equation coefficients) and then (2) convert moles P₂O₃ to grams P₂O₃ (via molar mass). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the amount of sig figs in the given value.

Atomic Mass (P): 30.974 g/mol

Atomic Mass (O): 15.998 g/mol

Molar Mass (P₂O₃): 2(30.974 g/mol) + 3(15.998 g/mol)

Molar Mass (P₂O₃): 109.942 g/mol

1 P₂O₃ + 3 H₂O -----> 2 H₃PO₃

10.2 moles H₃PO₃            1 mole P₂O₃              109.942 g
----------------------------  x  --------------------------  x  -------------------  =  561 g P₂O₃
                                        2 moles H₃PO₃              1 mole

The 0.05 moles of [tex]Na_{3}PO_{4}[/tex] required to make 1 L of solution in which the [tex]Na[/tex] concentration is 0. 15 M.

Calculation,

The Sodium phosphate dissolves as follows:

[tex]Na_{3}PO_{4}(s)[/tex] → [tex]3Na^{+} (aq)+PO_{4}^{-} (aq)[/tex]

To make 1. L of solution in which the  [tex]Na^{+[/tex]concentration is 0. 15 M

The morality  of [tex]Na^{+[/tex]= 0.15 M = number of moles / volume in lit

The morality of [tex]Na^{+[/tex]= 0.15 M = number of moles /1 Lit

number of moles of [tex]Na^{+[/tex] = 0.15 mole

The mole ratio is 1: 3

It means, the 1 mole of [tex]Na_{3}PO_{4}(s)[/tex] required to form 3 mole of [tex]Na^{+[/tex]

So, to form 0.15 mole of [tex]Na^{+[/tex]  = 1×0.15 / 3 moles of [tex]Na_{3}PO_{4}(s)[/tex]required.

Hence, number of moles of [tex]Na_{3}PO_{4}(s)[/tex] required = 0.05 moles.

learn about moles

brainly.com/question/26416088

#SPJ4

Answer: b

Explanation:

Answer:

D.) in the cloud-like areas around the nucleus

Explanation:

A.) is incorrect. Electrons exist in orbitals in the Bohr's Model.

B.) is incorrect. Electrons do not exist in the nucleus. They always exist outside of the nucleus, but their exact position has been debated.

C.) is incorrect. While the electron clouds in the quantum mechanical model can cover a relatively large amount of space, the distance from the nucleus is not great. Within this cloud, electrons can exist closer to the nucleus at a particular time.

D.) is correct. Electrons are said to exist somewhere within these clouds around the nucleus. The model uses the cloud references to display how you can never be sure where the electrons are located - they are always moving around.

Potassium can be a component of the cream.

An element's presence can be determined using a flame test. The potassium in cream of tartar is what gives it its white-purple color.

Low ionization enthalpy elements allow the flame to display color. Due to low ionization enthalpy, when an element is heated, its valence electrons are quickly excited to higher orbits and emit light as they return to their original orbit. Salts of potassium emit a white-purple color when ignited. The cream of tartar's chemical formula is KC₄H₅O₆.

Learn more about flame test here:

https://brainly.com/question/22043426

#SPJ4

The higher temperature will be:

As the temperature is increased from 22°C to a higher temperature, the rate constant increases by a factor of 7.00. The final temperature will be 271.74K.

What is the activation energy?

Activation energy is defined as the extra energy provided required to activate the molecules to start reacting and forming intermediate and later product.

Arrhenius equations given the relation rate constant and activation energy.

[tex]LnK=Ae^{-\frac{E_a}{RT}\\\\[/tex]

Where,

K= Rate constant

A= Pre exponential factor

[tex]E_a=[/tex] Activation energy

When two rate constants are given [tex]K_1\,[/tex] and [tex]\,K_2[/tex]

[tex]ln\frac{K_2}{K_1}=\frac{E_a}{R}(\frac{1}{T_2}-\frac{1}{T_1})[/tex]

Given,

[tex]T_1[/tex] = 22°C = 295K

Rate constant[tex](K_1)[/tex] increases by a factor of 7,i.e, [tex]K_2=7K_1[/tex]

[tex]E_a[/tex]= 54 kJ/mole = 54000 J/mole

R= 8.314 [tex]J\,mol^{-1}K^{-1}[/tex]

Putting the values,

[tex]ln\frac{K_2}{K_1}=\frac{E_a}{R}(\frac{1}{T_2}-\frac{1}{T_1})[/tex]

ln 7 x 8.31454000 = (1/[tex]T_{2}\\[/tex] - 1/295)

0.299 x [tex]10^{-3}[/tex] + 1/295 = 1/[tex]T_{2}[/tex]

0.00368 = 1/[tex]T_{2}[/tex]

[tex]T_{2}[/tex] = 1/0.00368

[tex]T_{2}[/tex] = 271.74 K

Therefore,

The increase in temperature will change from 295K to 271.74K.

Learn more about Arrhenius equation of activation here,

https://brainly.com/question/14977272

#SPJ4

Valence bond theory stating that a bond between two atoms is the strongest when the nuclei of the atoms are touching each other is true.

This theory states that when two valence orbitals of two different atoms overlap on each other, the bond is usually strong.

The bond formed in this scenario is usually covalent which involves sharing of the valence electrons.

Read more about Valence bond theory here https://brainly.com/question/11625586

#SPJ1

Concentration of base in terms of x is 0.1 - x.

The amount of solute that has dissolved in a specific amount of solvent or solution is measured as solution concentration. A concentrated solution is one that has a significant amount of dissolved solute in it. A diluted solution is one that has a little amount of dissolved solute in it.

A 0.10M buffer solution mean the sum of concentration of acid and base in the buffer is 0.1M

if A is acid nd B is its conjugate base

[A] + [B] = 0.1

[B] = 0.1 - [A]

if [A] or acid concentration is x, [B] or base concentration is

[B] = 0.1 - x

to know more about Concentration go to - https://brainly.com/question/13872928

#SPJ4

Answer:

A.) 0.43 g

Explanation:

Before you can calculate the mass, you need to find the moles. You can do this by using Avogadro's Law:

V₁ / n₁ = V₂ / n₂

In this equation, "V₁" and "n₁" represent the first balloon's volume and mole value. "V₂" and "n₂" represent the second balloon's volume and mole value. Since you are searching for the first balloon's mole value, you can plug the other values into the equation and simplify to find n₁.

V₁ = 1.54 L                         V₂ = 0.72 L

n₁ = ? moles                      n₂ = 0.100 moles

V₁ / n₁ = V₂ / n₂                                               <----- Avogadro's Law

1.54 L / n₁ = 0.72 L / 0.100 moles                 <----- Insert values

1.54 L / n₁ = 7.2                                              <----- Simplify right side

1.54 L = 7.2 x n₁                                              <----- Multiply both sides by n₁

0.214 = n₁                                                       <----- Divide both sides by 7.2

Now, you can find the mass using the molar mass of the gas. Remember, hydrogen exists as a diatomic molecule.

Atomic Mass (H₂): 2(1.008 g/mol)

Molar Mass (H₂): 2.016 g/mol

0.214 moles He            2.016 g
--------------------------  x  -----------------  =  0.43 g H₂
                                       1 mole

Answer:

506.81J

Explanation:

H = MC(T1 - T0)

H = 5 × 0.897 × (419 - 306)

H = 5 × 0.897 × 113

H = 506.81 J

As per specific heat of aluminium ,506.81 J of energy is gained  by the sample.

Specific heat capacity is defined as the amount of energy required to raise the temperature  of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.

It varies with temperature  and is different for each state of  matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.

It is given by the formula ,

Q=mcΔT

For the given example, Q=energy

m=mass=5 g, C=0.897 J/g.K

T₂=419 K

T₁=306 K

substituting in the formula ,Q=5×0.897(419-306)=506.81 J.

Thus, 506.81 J of energy is required.

Learn more about specific heat capacity,here:

https://brainly.com/question/1747943

#SPJ2

Answer:

               b option is correct

Explanation: