The things would which would be needed to survive the mesosphere include the following below:
Food and waterOxygen supply.What is a Mesosphere?This is refereed to as the third layer of the atmosphere which is present above the stratosphere and directly below the thermosphere.
It has a low density of gas and water vapor present in the area which is why it is no place for human life as there is a shortage of oxygen and other gases needed for some biochemical reactions in the ecosystem. This is therefore the reason why things such as food, water and oxygen supply is neeeded tio survive in the mesosphere.
Read more about Mesosphere here https://brainly.com/question/20542996
#SPJ1
Write words with a similar meaning to the given words for old, stubble and room help me?pls
Answer:
Old = senior. geriatric. senescent. unyoung. over-the-hill.
Stubble= bristles
whiskersdesigner stubblehairfacial hairbeardfive o'clock shadowFeedbackA jug containing water at 26° C while another contains water at 82°C,if a patient wish to bath with water 40°C , the ratio of the mass of hot water to that of cold water is_
Answer:2:7
Explanation:
Quantity of heat energy before mixing= Quantity of heat energy after mixing
M1. S1.T1+ M2.S2.T2= M.S3.T3
Let, .
M1 = mass of cold water
M2 = mass of hot water
S1=S2=S3=S
M=M1+M2
T1=28,T2=82,T3= 40
M1.28 + M2.82= (M1+M2)40
M1.28 + M2.82= M1 40+M2.40
M2.82 -M2.40= M2.40–M1.28
M2.42= M1. 12
M2/M1= 12/42= 2/7
Or
M2: M1= 2:7
The monster wants to make himself known to the family in the cottage in chapters 9-12 of Frankenstein. He decides he can't do that until he masters something. What skill
must he master?
A. How to dress properly
B. Language
C. The rules of etiquette
D. Music
Answer:
c
Explanation:
A iguana runs back and forth along the ground. The horizontal position of the iguana in meters over time is shown
What is the displacement of the iguana between 3 s and 6 s?
m
What is the distance traveled by the iguana between 3 s and 6 s?
The displacement of the iguana between 3 s and 6 s is 6.71 meters.
The distance traveled by the iguana between 3 s and 6 s is 8.08 meters.
What are distance and displacement?Distance is the sum of an object's movements, regardless of direction.
The term "displacement" refers to a shift in an object's position.
According to the graph:
The displacement of the iguana between 3 s and 6 s
= √{ (3-6)²+(6-0)²} meters
= 6.71 meters.
The distance traveled by the iguana between 3 s and 6 s
= [ √{ (3-5)²+(6-6)²} +√{ (5-6)²+(6-0)²}] meters
= [2+ 6.08] meters
= 8.08 meters.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ1
8. If the m<5 is 63°, find the
measure of <3.
The statement indicates that angle 3 seems to have a 117 degree measurement.
Short answer: What is measure?Compare of an untold amount with a fixed quantity that is known or A attribute of an item or event is measured when a number is assigned to it so that it may be compared to other things or occurrences.
Briefing:An angle is the figure produced by two photons that must intersect at a shared terminal in geometry. The symbol should indicate an angle.
The sum of the two degrees is 180 degrees but since radius 5 is 63 degrees.
Angle 3 is therefore = 180 - 63 = 117 degrees.
Consequently, angle 3 has a measure of 117 degrees.
To know more about Measure visit:
https://brainly.com/question/28827992
#SPJ1
A 25 kg box of roofing shingles is lifted 15 meters vertically to the top of a roof. How much work is done on the box?
Important Formulas:
[tex]F=ma[/tex]
force(measured in newtons) = mass(measured in kg) * acceleration(measured in m/s^2)
[tex]w=Fd[/tex]
work(measured in joules) = force(measured in newtons) * distance(measured in meters)
__________________________________________________________
Given:
[tex]m=25kg[/tex]
[tex]d=15m[/tex]
[tex]w=?[/tex]
We know that the acceleration due to gravity is 9.8 m/s^2.
__________________________________________________________
Finding force:
[tex]F=ma[/tex]
[tex]F=25\times9.8[/tex]
[tex]F=245N[/tex]
__________________________________________________________
Finding work:
[tex]w=Fd[/tex]
[tex]w=245\times15[/tex]
__________________________________________________________
[tex]\fbox{w = 3675 Joules}[/tex]
Equilibrium exists in a system where three forces are acting concurrently on an object. If the system includes a 5.0-newton force due north and a 2.0-newton force due south, the third force must be?
The third force must be 3.0 newtons due north in order for equilibrium to exist in the system.
Why should equilibrium exist in system?This is so because the total of all the forces acting on the object equals the net force acting on it. The net force in this situation is 3.0 newtons due north and is calculated by subtracting the 5.0 newton force due north from the 2.0 newton force due south.In equilibrium, the net force on an object is zero.A chemical reaction is said to be in a state of north equilibrium when the reactant and product concentrations remain stable throughout time. The concentrations of the reactants and products stay unchanged, and the rate of the forward reaction is equal to the rate of the reverse reaction.To know more about equilibrium, check out :
https://brainly.com/question/18849238
#SPJ1
At what separation will two charges, each of magnitude 6.0 μC, exert a force of 0.70 N on each other?
At separation of 1470 meters, the two charges exert a force of 0.70 N on each other.
What is electric force?Electric force is the interaction between any two charged objects that can be either attractive or repelling. Newton's rules of motion, which apply to all forces, explain how each one affects the target body and how it does so. The electric force is one of the many forces that operate on objects.
We know that electric force can be mathematically defined as:
F = kQq/r²
0.70 = 9.0 × 10⁹ × (6.0×10⁻⁹)²/r²
r = 1.47 meter.
Hence, the separation between two charges is 1.47 meters.
Learn more about electric force here:
https://brainly.com/question/20935307
#SPJ1
The sum of the x components of vectors A and B in (Figure 1 ) is
-5
4
14
6
Vectors A and B are shown in a tip to tail arrangement. Vector A begins at the origin (0,0) and ends at the x y coordinate (9,3). Vector B begins at the tip of vector A and ends at the x y coordinate (4,6).
The resultant (x,y) coordinate of vector B is (- 5, 3) and that of A is (9,3). Then, the sum of x components of vector A and B is 4.
What are vectors ?Vectors are physical quantities having both magnitude and direction. For example force, velocity, displacement etc .are vector quantities. Coordinates are used to describe the position of these vectors.
The coordinates of tail of the vector A is (0, 0) and the head is (9,3)
Then the coordinate of A is (9 -0, 3-0) = (9,3)
Similarly, the tail coordinate of B is (9,3) and head is (4,6). The coordinates of B vector is (4-9, 6-3) = (-5, 3)
Now the sum of x components of A and B is = - 5 + 9 = 4.
Therefore, option b is correct.
Find more on vectors:
https://brainly.com/question/14447709
#SPJ1
What is electronic dispersion theory?
Dispersion in wave theory is the phenomena where a wave's phase velocity changes depending on its frequency. The article can explore different definitions. This is the typical definition for dispersion (waves).
When sinusoidal waves with various wavelengths propagate at various speeds, a wave packet with mixed wavelengths has a tendency to disperse in space. Dispersion in wave theory is the phenomena where a wave's phase velocity changes depending on its frequency.
The article can explore different definitions. This is the typical definition for dispersion (waves).
A full set of approximate solutions to the one-electron Schrödinger equation are found in a three-dimensional atomic lattice that is randomly filled with atoms of different kinds and has, on average, the periodicity of a Bloch wave.
Equations are provided that enable the calculation of each wave's energy, average behavior, absent a phase factor, close to any sort of atom, and damping parameter.
A comparison is made between a periodic lattice with a complicated, energy-dependent potential and a random A-B lattice. The dispersion relation of the system is obtained by solving the eigenvalue problem in this potential using any of the established techniques for periodic potentials.
To learn more about Dispersion theory from given link
https://brainly.com/question/28461293
#SPJ1
a) What is the magnitude of the force F⃗ on the −10 nC charge in (Figure 1)? Express your answer using two significant figures.
b) What is the direction of the force F⃗ on the −10 nC charge in (Figure 1)? Give your answer as an angle measured cw or ccw (specify which) from the +x-axis. Express your answer in degrees. Enter a positive value if the angle is counterclockwise and negative value if the angle is clockwise.
a) The magnitude of the force F on the −10 nC charge is 0.00134 Newton.
b) The direction of the force F on the −10 nC charge is 41.99° with horizontal line.
What is electric force?Electric force is the attractive or repulsive interaction between any two charged things.
a) the magnitude of the force F on the −10 nC charge = √{k (q₁Q/r₁²)²+(q₂Q/r₂²)²}
= kQ √( (q₁/r₁²)²+ (q₂/r₂²)²}
= 9×10⁹×10×10⁻⁹ √{ (1×10⁻⁹/(0.01)²)² +(10×10⁻⁹/(0.03)²)² }
= 0.00134 Newton.
b) the direction of the force F on the −10 nC charge
= tan⁻¹( (1×10⁻⁹/(0.01)²) ÷(10×10⁻⁹/(0.03)²) )
= 41.99°
Learn more about electric forces here:
https://brainly.com/question/2526815
#SPJ1
The leaning tower of Pisa is about 56 meters tall. A ball released from the top takes 3.4 seconds to reach the ground. The final velocity of the ball before it hits the ground is 33 meters/second. Assuming that the ball experienced a constant acceleration throughout this descent, calculate the magnitude of the acceleration.
The magnitude of the constant acceleration of the ball is 9.7 m/s².
What is acceleration?Acceleration is the rate of change of velocity.
To calculate the constant acceleration of the ball, we use the formula below.
Formula:
a = (v-u)/t................. Equation 1From the question,
Given:
a = Acceleration,v = Final velocityu = Initial velocityt = TimeFrom the question,
Given:
v = 33 m/su = 0 m/s t = 3.4 secondsSubstitute these values into equation 1
a = (33-0)/3.4a = 9.7 m/s²Hence, the acceleration is 9.7 m/s².
Learn more about acceleration here: https://brainly.com/question/26216029
#SPJ1
Question 5 of 15:
Select the best answer for the question
5. Eighteen cubic feet of air having a pressure of 60 psia and a temperature of 190 F is to be compressed, together with 28 cu ft of air having a pressure of 40 psia and a temperature
of 60 F, in a vessel whose volume is 22 cu ft. What will be the temperature of the mixture, if its pressure is 100 psia?
7
O A. 370 F
O B. 577 F
O C. 117 F
O D. 90 F
90 F. The temperature of the mixture can be calculated using the Ideal Gas Law.
This states that the product of the pressure, volume, and absolute temperature of a gas is equal to the product of the number of moles of the gas and the universal gas constant.
Using this equation, we can solve for the temperature of the mixture, given the total pressure and the total volume of the mixture.
We can first calculate the total number of moles of the mixture, by assuming both gases are ideal:
18 cu ft of gas at 60 psia and 190 F = 1.64 moles
28 cu ft of gas at 40 psia and 60 F = 1.28 moles
Total moles of the mixture = 2.92 moles
Using the Ideal Gas Law, we can then calculate the temperature of the mixture:
(100 psia x 22 cu ft x T) = (2.92 moles x 0.082)
T = 90 F.
What is the Ideal Gas Law?
The Ideal Gas Law is an equation that describes the relationship between pressure, volume, temperature, and amount (in moles) of an ideal gas. It states that: PV = nRT, where P is the pressure, V is the volume, n is the amount of substance, R is the ideal gas constant, and T is the temperature.
Hence, Option D is correct.
To know more about the Ideal Gas Law,
https://brainly.com/question/15132707
#SPJ1
Find the location of the CM of a system of three particles arranged such that two of the particles with mass m are separated by distance I along the y-axis. The third mass 2m lies on the x-axis and is separated by a distance I from one of the masses.
Answer:
CM of a system ( 0.5l , 0.25l )
Explanation:
x = (m1.x1 +m2.x2 +m3.x3) / ( m1 + m2 +m3)
x = ( m x 0 + m x 0 + 2m x l ) / ( m+m+2m)
x = 2m x l / 4m
x = 0.5 l
y = (m1 x y1 +m2 x y2 +m3 x y3) / ( m1 + m2 +m3)
y = (m x 0) + m x l + 2m x 0 ) / ( m + m + 2m )
y = m x l / 4m
y = 0.25 l
i understand how something about the pod could have affected its velocity change.
yes or not yet.
EXPLAIN your answer choice.
A stronger force can cause a greater change in an object's velocity. The correct option is yes
What caused the pod to change direction?The force exerted by the thrusters caused the pod to change direction. The thrusters on the ACM pod exerted the same strength force as thrusters on other pods on other missions. If the same strength force is exerted on two objects but the objects have different masses the object with less mass will have a greater change in velocity.
Therefore pod would have had to have a lighter mass meaning a smaller amount of force would have had to be exerted onto the pod making it move in the opposite direction.
Learn more about pod change here: brainly.com/question/19148969
#SPJ1
A force of 50N applied to the end of a lever moves that end a certain distance if the other end of the lever is moved half as far how much force does it exert?
The force exerted at other end is 100N.
Work is the product of the component of the force in the direction of the displacement and the magnitude of this displacement.Mathematically, the above statement is expressed as follows:W = (F cos θ) d = F. d
Where,
W is the work done by the force.
F is the force, d is the displacement caused by force
θ is the angle between the force vector and the displacement vector
Let , F' = Force exerted on ladder at other end
d' = distance moved = d/2 (given)
i.e. W = F'd' and W = Fd
Using these two equations we get, F'd' = Fd
i.e. F' = Fd/d'
Given, F = 50N and d' = d/2
Putting these values in above equation we get, F' = 100N
To know more about work visit:
https://brainly.com/question/3977835
#SPJ1
Which of the following best explains the cause and effect relationship between convection currents in the mantle and the movement of tectonic plates?
A. The tectonic plates will heat up the mantle due to being closer to the surface of the earth and sun. The less dense particles in the mantle fall and cool toward the core, driving the convection cycle.
B. The tectonic plates drive the convection cycles in the mantle. As the plates move apart or push together, particles in the mantle will be thrust toward the core.
C. The heat from the core will make the particles in the mantle more dense and rise, causing plates in the
lithosphere to move in the opposite direction of the convection current.
D. The heat from the core will make particles in the mantle less dense and rise, causing plates in the
lithosphere to move in the direction of the convection current.
C) The mantle's particles will become more dense and rise as a result of the core heat, causing the lithosphere's plates to move in the opposite direction of the convection current.
How does the mantle's density change as it heats up?Convection Currents The lithosphere becomes denser than the surrounding magma and sinks back toward the core as the heated mantle transfers heat energy to it.
How does heat travel from the core to the crust in the mantle?Conduction from the core directly heats the lower mantle. As atoms collide, heat is transferred in conduction. Convection is the movement of warm and cool materials upward and downward. Material that is hot rises to the surface through conduction.
When the mantle rises, what takes place?“hot spots," which are non-plate tectonic volcanic regions, are probably caused by mantle plumes. A diapir is formed when a mantle plume reaches the upper mantle. Volcanic eruptions are sparked by the heat generated by this molten material in the asthenosphere and lithosphere.
To learn more about mantle here:
https://brainly.com/question/28827790
#SPJ1
a boy of 40kg and a girl of a mass an unknown mass plays on a seesaw of negligible weigh. If the boy sits 300cm from the pivot and the girl sits 400m from the pivot what is the mass of the girl in order for the seesaw to be in equilibrium
The mass of the girl is 30 kg in order for the seesaw to be in equilibrium.
What is seesaw?A particular kind of lever is a seesaw, which has a long beam coupled to a pivot known as the fulcrum.
As soon as you sit on one side of the beam and apply weight on one end, the beam falls to the ground. This is because the weight of your body is being pulled down by the force of gravity, along with the beam.
Let the mass of the girl = m kg
In equilibrium;
40 kg × 300 cm = m × 400 cm
⇒ m = 30 kg.
Hence, the mass of the girl is 30 kg.
Learn more about seesaw here:
https://brainly.com/question/28566147
#SPJ1
This theory of motivation focuses on finding the right level of stimulation. An organism tries to find behaviors that actually increase arousal because everything else bores them.
*
2 points
Cognitive Theory
Hierarchy of Needs
Drive-Reduction Model
Optimal Arousal Theory
Optimal Arousal theory focuses on finding the right level of stimulation.
What is Optimal Arousal theory?William James (1842–1910), frequently referred to as the father of psychology in the United States, made significant contributions to early studies on motivation.
James proposed a number of instincts that help with survival as the driving forces behind conduct . An instinct is a species-specific pattern of behavior that is not taught, according to biology.
But there was a lot of disagreement over what exactly constitutes instinct among James's contemporaries. James postulated a number of unique human instincts, although many of his contemporaries had different lists.
Therefore, Optimal Arousal theory focuses on finding the right level of stimulation.
To learn more about arousal theory, refer to the link:
brainly.com/question/29741835
#SPJ1
A man is attempting to train his dog. He is pulling on the dog with a force of 52.4 Newtons at an angle of 35.1 degrees above the horziontal. Fimd the X and Y component of the applied Force
The formula for the horizontal component (Fx), which is the angle the force makes with the horizontal, is Ftens•cosine(). Ftens• sine() can be used to compute the upward component (Fy), where is the angle that the force produces with the horizontal.
What is the force's horizontal component?The portion of a force that works horizontally with regard to a body is known as its horizontal component. Its vertical component is known as its vertical component.
Why is moving the box with the rope horizontal easier?The pulling of the box is with the rope horizontal. When the rope is angled Because Is less than, the horizontal component (= F cos ) is less. As a result, it is the proper response.
To know more about force visit:-
https://brainly.com/question/13191643
#SPJ1
helpp tyy
Which of the following is a way to make magnets?
heating
freezing
pressure
heating or pressing but heating is most appropriate, so the answer is heating.
A force of 7.36 N acts on a(n) 2.1 kg object for 24.7 s. What is the object’s change in momentum? What is its change in velocity? Answer in units of N · s
Based on the data given:
the change in momentum of the object is 181.8 N.sthe change in velocity, Δv = 86.6 m/sWhat is the change in the momentum of a body?
The change in momentum of the object equals the impulse experienced by the object
Mathematically,
Impulse = change in momentum
Impulse = F • t
change in momentum = m • Δ v
F • t = m • Δ v
where
F is the force
t is the time the force acts
m is the mass of the object
Δv is the change in velocity
For the given values:
change in momentum of the object = 7.36 * 24.7
change in momentum = 181.8 N.s
Change in velocity, Δv = change in momentum / mass
Change in velocity, Δv = 181.8 / 2.1
Change in velocity, Δv = 86.6 m/s
Learn more about change in momentum at: https://brainly.com/question/20363811
#SPJ1
a car with mass m1=1000kg moving at speed v1=6m/s hits a stationary truck with mass m2=5000kg. The impact is absolutely inelastic. Determine the speed of both car and truck immediately after the impact
Impact Speed means the maximum speed of impact tested upon the bumper of the vehicle pursuant to sections 581.6 and 581.7 of part 581 of title 49 of the Code of Federal Regulations.
In an inelastic collision, what occurs when two objects collide?An inelastic collision occurs when items cling together after impact and kinetic energy is not preserved. Because of this violation of conservation, the forces between colliding objects may convert kinetic energy to other types of energy, such as potential energy or thermal energy.To calculate the momentum of either individual vehicle, divide the total system momentum by two (approx. 11 200 kg*m/s). Once the momentum of the individual automobiles is known, the after-collision velocity may be calculated by simply dividing momentum by mass (v=p/m).To learn more about impact speed to refer:
https://brainly.com/question/15695646
#SPJ1
Which of the following is not a safety tip for outdoor activities
The following which is not a safety tip for outdoor activities is to go alone for a sense of oneness with nature and is therefore denoted as option A.
What is Safety?This is referred to as the condition of being protected from harm or other danger and it involves the use of various methods and activities and an example is to ensure that a basic first aid kit is available so as to help in the incident of an injury.
However going alone for a sense of oneness with nature is not a safety tip as should in case any issue arises there will be no one to support and rescue such individual.
Read more about Safety here https://brainly.com/question/8430576
#SPJ1
The full question is:
Which of the following is not a safety tip for outdoor activities
a. go alone for a sense of oneness with nature
b. bring a basic first aid kit
c. bring a flashlight or headlamp
d. pack plenty of water and energy-dense food
Helen is para sailing. She sits in a seat harness which is attached by a tow rope toba speedboat. The rope makes an angle of 59.9* with the horziontal and has a tension of 364N. Determine the horziontal and vertical component of the tension force
To find the horizontal and vertical components of the tension force in para sailing, we can use the basic trigonometric ratios of sine, cosine and tangent.
How to use trigonometric ratios ?First, given the rope's angle (59.9 degrees) and the tension force (364 N), we can apply the following formula to determine the tension force's horizontal component (Fx): Fx = Tension force x cos(angle) = 364 N x cos (59.9).Next, we can use the angle of the rope and the tension force to find the vertical component (Fy) of the tension force using the formula: Fy = Tension force x sin(angle) = 364 N x sin(59.9)You must convert the angle to radians because these calculations, as you should be aware, employ radians rather than degrees.As a result, the tension force's horizontal component has the following formula: Fx = 364N x cos(59.9) = 225.98N roughly.Additionally, the vertical component of the tension force is roughly 318.6N, or Fy = 364N x sin(59.9)According to these calculations, the tension force has two components: a horizontal component that is 225.98 N and a vertical component that is 318 N.To know more about trigonometric ratios , check out :
https://brainly.com/question/4399339
#SPJ1
The coyote, whose mass is 20kg is chasing the roadrunner when the coyote accidentally runs off the edge of the cliff and plummets to the ground 30m below. What force does the ground exert on the coyote as he makes a coyote-shaped dent 0.420m deep in the ground.
The force is 196 N (20kg x 9.8 m/s2)
What is force ?Force is an action or influence that causes an object to change its state of motion or rest. Force can be exerted by a single object or by two or more objects interacting with each other. Examples of force include friction, gravity, magnetism, electricity, and pressure. The magnitude of a force is usually measured in newtons (N) and is determined by the amount of mass and acceleration of the object it is acting upon.
The force exerted on the coyote by the ground is equal to the mass of the coyote multiplied by the acceleration due to gravity, which is 9.8 m/s2.
To learn more about force
https://brainly.com/question/12970081
#SPJ1
A 62.3 kg base runner begins his slide into second base while moving at a speed of 4.49 m/s. He slides so that his speed is zero just as he reaches the base. The acceleration of gravity is 9.8 m/s². What is the magnitude of the mechanical energy lost due to friction acting on the run- ner?
Answer:
628 J
Explanation:
ME = PE + KE
PE = mgh = 0, because h = 0
KEi (initial KE) = 1/2mv² = 1/2(62.3 kg)(4.49 m/s)² = 628 J
KEf (final KE) = 0, because v-final = 0
All the initial ME, which is all KE, converts to thermal E due to friction
A man drags a 10.0 kg bag of mulch at a constant speed applying a 22.5 N force at a 32-degree angle. What is the friction force acting on the bag?
The
friction
force acting on the bag is 4.36µ.
What is friction force?
The
force
preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.
Given,
Force =F=22.5 n
Mass=m= 10 kg
mu=µ=?
(1N= 1kg m/s²)
Gravitational force =g= 9.81 m/s²
As we know,
F= µ*m*g
µ= m*g/F
= 10*9.81/ 22.5
µ= 4.36 .
Therefore, the friction force acting on the bag is 4.36.
To know more about
Force
visit:
brainly.com/question/26115859
#SPZ1
The bag is subject to a friction force of 4.36. A man applies a 22.5 N force at a 32° angle while dragging a 10.0 kilogram bag of mulch at a steady speed.
How much friction is there?Friction refers to the force that resists hard surface, fluid layering, and materials ingredients from gliding past one another. Friction lessens a machine's mechanical advantage, or, to put it another way, friction decreases the output to input ratio.
Force = 22.5 N
Mass = 10 kg
⇒ mu = µ (1N= 1kg m/s²)
⇒ g = 9.81 m/s²
As we know, F= µ × m × g
⇒ µ = (m × g)/F
⇒ (10 × 9.81)/ 22.5
⇒ µ = 4.36 .
Therefore, the friction force acting on the bag is 4.36.
To know more about Force visit :-
https://brainly.com/question/13191643
#SPJ1
A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 2.00 m and the distance from the fulcrum to the load is 0.500 m. A graph of resistance force vs. effort force is shown. What is the mechanical advantage of the lever? What is the ideal mechanical advantage of the lever? What is the efficiency of the lever? Show your work.
The mechanical advantage of the lever is 3.5.
The ideal mechanical advantage of the lever is 4
The efficiency of the lever is 87.5 %.
What is the mechanical advantage of the lever?The mechanical advantage of the lever is the ratio of the load overcame by the lever to the effort applied by the lever.
M.A = Load / Effort
From the graph we will find the change in load to change in effort is calculated as;
M.A = ( 160 N - 20 N ) / ( 50 N - 10 N )
M.A = 3.5
The ideal mechanical advantage of the lever is calculated as follows;
I.M.A = distance travelled by effort / distance travelled by load
I.M.A = ( 2 m ) / ( 0. 5 m )
I.M.A = 4
The efficiency of the lever is calculated as follows;
E = M.A / I.M.A x 100%
E = ( 3.5 / 4 ) x 100%
E = 87.5 %
Learn more about efficiency of lever here: https://brainly.com/question/29263794
#SPJ1
8. A 2kg object explodes and divides into three pieces, one piece has a mass of 800g and has a velocity of [30] m/s, a second piece has a mass of 500g and has a velocity of [520] m/s. What is the velocity of the third mass?
Answer:
v3 = 0 gm/s / 700g
Explanation:
To solve this problem, you need to use the principle of conservation of momentum, which states that the total momentum of a system remains constant unless acted upon by an external force. In this case, the total momentum of the system (the 2kg object before it explodes) is equal to the sum of the momenta of the three pieces after the explosion.
You can calculate the momentum of each piece by multiplying its mass by its velocity:
P1 = 800g * 30 m/s = 24,000 gm/s
P2 = 500g * 520 m/s = 260,000 gm/s
The total momentum of the system is the sum of these two momenta:
Ptotal = P1 + P2 = 24,000 gm/s + 260,000 gm/s = 284,000 g*m/s
The third piece has a mass of 2kg - 800g - 500g = 700g. We can use the conservation of momentum equation to find its velocity:
Ptotal = (700g * v3) + (800g * 30 m/s) + (500g * 520 m/s)
v3 = (Ptotal - (800g * 30 m/s) - (500g * 520 m/s)) / 700g
v3 = (284,000 gm/s - (800g * 30 m/s) - (500g * 520 m/s)) / 700g
v3 = (284,000 gm/s - 24,000 gm/s - 260,000 gm/s) / 700g
v3 = (284,000 - 24,000 - 260,000) gm/s / 700g
v3 = 0 gm/s / 700g
The velocity of the third mass is 0 m/s.
Hope this helps.