The degausser in the basement of your organization can securely destroy various types of magnetic media such as hard drives, floppy disks, and magnetic tapes. It works by using a powerful magnetic field to erase the data stored on these media, making it impossible to recover any information. It's important to use a degausser properly and follow all safety protocols to ensure the secure destruction of sensitive data.
A degausser is a machine that disrupts and eliminates magnetic fields stored on tapes and disk media, removing data from devices like your hard drives. The degaussing process changes the magnetic domain where data is stored, and this shift in domain makes data unreadable and unable to be recovered. Degaussing is the process of decreasing or eliminating a remnant magnetic field. It is named after the gauss, a unit of magnetism, which in turn was named after Carl Friedrich Gauss. Due to magnetic hysteresis, it is generally not possible to reduce a magnetic field completely to zero, so degaussing typically induces a very small "known" field referred to as bias. Degaussing was originally applied to reduce ships' magnetic signatures during World War II. Degaussing is also used to reduce magnetic fields in cathode ray tube monitors and to destroy data held on magnetic storage.
To learn more about "Degausser" visit: https://brainly.com/question/14312869
#SPJ11
Which tool can your organization use to remotely wipe a lost mobile phone when byod has been implemented in the enterprise?
Remote Wipe is a tool that can your organization use to remotely wipe a lost mobile phone when byod has been implemented in the enterprise.
What Is a Remote Wipe?It is known to be a tool that can used to erase data on a device that is known to be lost or stolen so that if the device is seen in the hands of the wrong hands, the data in it cannot be compromised.
Note the term remote wipe is seen as a kind of a security feature that gives room for a network administrator or the owner of any given device to send a command that will act to remove or deletes data that is in a computing device.
Note that it is a tool that It is primarily used to remove data on a device that has been lost or stolen and thus Remote Wipe is a tool that can your organization use to remotely wipe a lost mobile phone when byod has been implemented in the enterprise.
Learn more about Remote Wipe from
https://brainly.com/question/14290857
#SPJ1
4.8% complete this is a single choice question; skip ahead to question content a b c d confirm difficulty level: moderate an intruder monitors an admin's unsecure connection to a server and finds some required data, like a cookie file, that legitimately establishes a session with a web server. what type of attack can the intruder perform with the cookie file?
Answer:
A replay attack
What do we call a blinking indicator that shows you where your next action will happen?
Answer:
cursor
Explanation:
What two advantages does a dataraptor turbo extract have over a standard dataraptor extract?
The two advantages of dataraptor turbo extract that it have over a standard dataraptor extract are:
It is known to have Simpler configuration.It is known to also have a better performance at runtime.What is data Raptor?A DataRaptor is known to be a kind of a mapping tool that helps a person to be able to read, change, and write Salesforce data.
Hence, The two advantages of dataraptor turbo extract that it have over a standard dataraptor extract are:
It is known to have Simpler configuration.It is known to also have a better performance at runtime.Learn more about DataRaptor from
https://brainly.com/question/2596411
#SPJ1
Detail how you would go about adding reserved words into the problem where you are designing your own lexical analyzer? How would you have to change your code? What would you have to add to let users choose a reserve word word as an identifier?
A compiler's initial phase is lexical analysis. It reads changed source code written in the form of phrases from language preprocessors. By deleting any whitespace or comments in the source code, the lexical analyzer converts these syntaxes into a set of tokens. See how reserved words are added below.
How are reserved words added on the lexical analyzer?When the lexical analyzer reads the target program code, it examines it letter by letter, and when it encounters a whitespace, operator symbol, or special symbol, it determines that a word has been finished.
Using the float floatvalue as an example, while scanning both lexemes until it reaches 'float,' the lexical analyzer is unable to determine whether it is a reserved word float or the details of a keyword float value.
According to the Longest Match Rule, the lexeme scanned should be decided by the longest match among all possible keywords.
The lexical analyzer also uses rule priority, which means that a reserved term, such as a keyword, of a language takes precedence over human input.
That is, if the lexical analyzer detects a lexeme that resembles any existing reserved term, an error should be generated.
Learn more about the lexical analyzer at;
https://brainly.com/question/13211785
#SPJ1
As an IT technician for your company, you are in the process of setting up several servers in your network. During the process, one of the servers is misconfigured and is, therefore, having trouble synchronizing information with the other servers.
the errors simple yet effective.
Your organization has just approved a special budget for a network security upgrade. What procedure should you conduct to make recommendations for the upgrade priorities? unit 9 quiz
The procedure should you conduct to make recommendations for the upgrade priorities is posture assessment.
What is Posture assessment?Postural assessment is known to be one that contains the observation of stable posture so as to get an alignment and visual assessment of paired anatomic traits in terms of symmetry.
Hence, the procedure should you conduct to make recommendations for the upgrade priorities is posture assessment.
Learn more about posture assessment from
https://brainly.com/question/14328111
#SPJ1
While working on a Windows workstation, you've enabled Remote Desktop.
Which of the following ports MUST be opened in the server's firewall to allow remote clients to access the desktop?
a) 3389
b) 389
c) 110
d) 123
The ports that MUST be opened in the server's firewall to allow remote clients to access the desktop is 3389,
What is the port of a computer?A port in computer hardware is known to be a form of a jack or socket that is said to be used when a piece of software is known to be translated or converted to be used or run on another hardware or operating system (OS).
Note that The ports that MUST be opened in the server's firewall to allow remote clients to access the desktop is 3389.
Learn more about ports from
https://brainly.com/question/18133590
#SPJ1
Thunder lightning manufacturing, inc. developed its annual manufacturing overhead budget for its master budget for 2021 as follows: expected annual operating capacity 120,000 direct labor hours variable overhead costs indirect labor$600,000 indirect materials120,000 factory supplies 60,000 total variable 780,000 fixed overhead costs depreciation240,000 supervision120,000 property taxes 96,000 total fixed 456,000 total costs$1,236,000 the relevant range for monthly activity is expected to be between 8,000 and 12,000 direct labor hours. prepare a flexible budget for a monthly activity level of 8,000 and 9,000 direct labor hours.
The flexible budget for a monthly activity level of 8,000 and 9,000 direct labor hours is illustrated below.
How to compute the flexible budget?Particulars Direct labor hour
Variable Overhead cost
Indirect labor. $4000 $4500
Indirect material. $8000. $9000
Factory supplies. $4000. $4500
Total variable cost $52000. $58500
Fixed overhead cost
Depreciation. $20000. $20000
Supervision. $10000. $10000
Property tax $8000. $8000
Total fixed $38000. $38000
Total cost. $90000. $96500
Learn more about budget on:
brainly.com/question/6663636
#SPJ1
AAA DRIVER'S ED has anyone done this before??? and they know the answer?? bc its not working
The correct sequence for the driver's ED test is:
Check gaugeStart engineRelease keyCheck lightsLet engine idleCheck if gear is in parkCheck parking brakeFoot on brake pedalWhat is a Driving Test?This refers to the official test of how competent a driver is to ride on the highway and must be passed in order to get a driving license.
Hence, we can see that when taking a driver's test, you would be tested on your knowledge of starting a car, checking the gauges and parking brakes, and the correct sequence of doing it.
Read more about driving test here:
https://brainly.com/question/2666433
#SPJ1
Answer: Mine was not working either, it said it was wrong even though i did it correctly, here is the proper sequences:
Explanation:
What should you point out when demonstrating 2023 murano’s xtronic cvt during full throttle acceleration?.
The thing to point out when demonstrating 2023 murano’s xtronic cvt during full throttle acceleration are:
The fast response to its steering input.The way or the level at which Murano stays when cornering.What is throttle acceleration?Throttle response is known as vehicle responsiveness and it is one that often measures how fast a vehicle's internal combustion engine, can be able to increase its power output in regards to its response to a driver's need for acceleration.
Hence,The thing to point out when demonstrating 2023 murano’s xtronic cvt during full throttle acceleration are:
The fast response to its steering input.The way or the level at which Murano stays when cornering.Learn more about throttle acceleration from
https://brainly.com/question/27962285
#SPJ1
What three values must be added to the ipv4 properties of a nic in order for a computer to have basic connectivity with the network? (choose three. )
China sends a computer virus that shuts down telephone service in the United States. In retaliation, the United States hacks into China's power grid and causes blackouts throughout the provinces. This exemplifies how the United States __________.
In the case above, it exemplifies how the United States can be both victim and perpetrator of cyberattacks.
What are cyberattacks?A cyber attack is known to be a form of an online assault that is said to be launched by a lot of cybercriminals through the use of one or more computers against a single or a lot of computers or networks.
Note that In the case above, it exemplifies how the United States can be both victim and perpetrator of cyberattacks as it is an online assault.
See options below
a. establishes military superiority
b. can be both victim and perpetrator of cyberattacks
c. places a low priority on cyberattack protection
d. has nothing to fear from cyberattacks
Learn more about computer virus from
https://brainly.com/question/26128220
#SPJ1
What is the confirmation or validation of an event or object? multiple choice business intelligence data fact descriptive analytics
Fact is the confirmation or the validation of an event or object.
What do we mean by a fact?A fact is known to be a form of an indisputable observation in regards to a natural or social scenario.
The definition of the term fact is known to be anything that is regarded as true or that thing that has taken place or has been proven to be right. An example of a fact is the popular notion that the world is round.
Note that a person can see it straightforward and show it to others, hence, Fact is the confirmation or validation of an event or object.
Learn more about Fact from
https://brainly.com/question/25465770
#SPJ1
When an event takes place, the control responsible for the event creates an event?
Answer: Firing
Explanation:
Permute the loops in the following function so that it scans the three-dimensional array a with a stride-1 reference pattern.
The result of the permuted loops in the following function so that it scans the three-dimensional array a with a stride-1 reference pattern is given below.
What is the result of the permuted loops described above?Using C, the relevant codes are given below:
{
int i,j,k,sum=0;
for(i=0;i<M;i++)
for(j=0;j<N;j++)
for(k=0;k<N;k++)
sum+=a[i][j][k];
return sum;
}
What is a permuted loop?When more than two loops are reordered, loop permutation (also known as loop reordering) is a generalization of this loop exchange transformation.
A straightforward example of performing loop interchange is shown in the code below.
According to compiler theory, loop optimization is the process of quickening loop execution and lowering loop overheads.
Loop Permutation is crucial for increasing cache performance and maximizing the potential of parallel processing.
The majority of a scientific program's execution time is spent in loops, hence numerous compiler optimization techniques have been created to speed them up.
Learn more about 3-dimensional array:
https://brainly.com/question/3500703
#SPJ1
Full Question
See attached image.
Application software can be categorized as either general-purpose, specialized, or ________ apps.
Application software can be categorized as either general-purpose or mobile apps.
What are mobile apps?Mobile apps can be defined as specialized applications developed to be used in cellphone devices.
Mobile apps are widely used and may help with diverse types of daily tasks and human activities.
In conclusion, application software can be categorized as either general-purpose or mobile apps.
Learn more about mobile apps here:
https://brainly.com/question/26264955
#SPJ1
Define a function GetVolume() that takes one integer parameter passed by reference as totalCups and two integer parameters as gallons and cups. If both gallons and cups are non-negative, the function computes totalCups and returns true. Otherwise, the function returns false without updating totalCups.
The computer program that takes one integer parameter is illustrated below.
What is a computer program?A computer program is a set of instructions in a programming language for a computer to execute. A computer program in its human-readable form is called source code.
The program is illustrated below:
#include<iostream>
using namespace std;
void ConvertVolume(int totalTablespoons, int &cups, int &tablespoons) {
// compute the cups and tablespoons
// as they are passed by reference,
// the change will also reflect in the main function
cups = totalTablespoons / 16;
tablespoons = totalTablespoons % 16;
}
int main() {
int usrCups;
int usrTablespoons;
int totalTablespoons;
// user input
cin>>totalTablespoons;
// call the function
ConvertVolume(totalTablespoons, usrCups, usrTablespoons);
// print the output
cout<<usrCups<<" cups and "<<usrTablespoons<<" tablespoons"<<endl;
return 0;
Learn more about programs on:
https://brainly.com/question/26642771
#SPJ1
If a program is written in a messy and inefficient style, it will definitely have compiler errors.
a. true
b. false
If a software program is written in a messy and inefficient style, it will definitely have compiler errors: B. False.
What is a compiler?A compiler can be defined as a software program that is designed and developed to translate the entire source code of program at once, in order to produce an object code.
This ultimately implies that, a compiler translates a software program that is written in a high-level language into low-level language (machine language).
Generally, we can deduce that an error in a software program that is associated with a violation of language (syntax) rules will be detected at compile time.
In conclusion, it is false to state that a software program that is written in a messy and inefficient style will definitely have compiler errors.
Read more on programs here: brainly.com/question/26324021
#SPJ1
What is the new subnet mask in prefix format?
In the case above, the the new subnet mask in prefix format is seen in IPv6 and in IPv4.
What is subnet prefix mask?A lot or a single computer that is known to be linked to a subnet is said to shares a kind of an identical part of the IP address.
Note that this shared information is said to be called the routing prefix, and in IPV4 (Internet Protocol Version 4), the routing prefix is said to be called a subnet mask.
Hence, The the new subnet mask in prefix format is seen in IPv6 and in IPv4 because that is the format that it always comes in.
Learn more about subnet from
https://brainly.com/question/8907973
#SPJ1
Using above information, Write a prolog program to answer the following queries. Please note that you cannot simply answer these queries with only facts, you should answer then using facts and rules
Using the computational knowledge in python it is possible to write a code that uses the functions to make a a prolog program to answer the following queries
Writting the code in python:valid([]).
valid([Head|Tail]) :-
fd_all_different(Head),
valid(Tail).
sudoku(Puzzle, Solution) :-
Solution = Puzzle,
Puzzle = [S11, S12, S13, S14,
S21, S22, S23, S24,
S31, S32, S33, S34,
S41, S42, S43, S44],
fd_domain(Solution, 1, 4),
Row1 = [S11, S12, S13, S14],
Row2 = [S21, S22, S23, S24],
Row3 = [S31, S32, S33, S34],
Row4 = [S41, S42, S43, S44],
Col1 = [S11, S21, S31, S41],
Col2 = [S12, S22, S32, S42],
Col3 = [S13, S23, S33, S43],
Col4 = [S14, S24, S34, S44],
Square1 = [S11, S12, S21, S22],
Square2 = [S13, S14, S23, S24],
Square3 = [S31, S32, S41, S42],
Square4 = [S33, S34, S43, S44],
valid([Row1, Row2, Row3, Row4,
Col1, Col2, Col3, Col4,
Square1, Square2, Square3, Square4]).
| ?- sudoku([_, 4, 3, 2,
3, _, _, _,
4, 1, _, _,
_, _, 4, 1],
Solution).
Solution = [1,4,3,2,3,2,1,4,4,1,2,3,2,3,4,1]
yes
See more about python at brainly.com/question/18502436
#SPJ1
A medical data agency is using an application that maintains social security numbers and birth dates in a database to track medical records across multiple offices. The office wants to ensure that the data is protected but has the ability to restore it to its true state when needed. Which of the following de-identification methods should the application adopt
In the case above about the application, the de-identification methods that the agency should adopt is known to be the bar codes.
What is bar code code?A barcode is made up of bars and spaces and it is known to be a machine-readable depiction of numerals and characters.
The use of bar code is one that will make the medical agency to track the medical records easily.
Note that stripes which are barcodes are often used in supermarkets and The de-identification methods that the agency should adopt is known to be the bar codes.
Learn more about bar codes from
https://brainly.com/question/13117502
#SPJ1
Amber is a hacker who steals information when people enter their personal details on specific websites. She intercepts the public key as it is sent from the Web server to the Web browser and substitutes her own public key in its place. This enables her to intercept the communication and decrypt the symmetric encryption key using her private key.
In the case above, the type of hacking attack is Amber perpetrating is option b. A man-in-the-middle attack.
What is a person in the middle attack?A man-in-the-middle (MiTM) attack is known to be a form of a type of cyber attack where the attacker is known to often and secretly intercepts and pass messages that occurs between two parties who think they are communicating directly with one another.
Hence, In the case above, the type of hacking attack is Amber perpetrating is option b. A man-in-the-middle attack.
Se full question below
Amber is a hacker who steals information when people enter their personal details on specific websites. She intercepts the public key as it is sent from the Web server to the Web browser and substitutes her own public key in its place. This enables her to intercept the communication and decrypt the symmetric encryption key using her private key.
Which type of hacking attack is Amber perpetrating?
a. A denial-of-service attack
b. A man-in-the-middle attack
c. A drive-by attack
d. A malware attack
Learn more about hacking attack from
https://brainly.com/question/7065536
#SPJ1
____ applications require that a record be accessed immediately while a client is waiting.
A. Database.
B. Real-time.
C. Sort.
D. Batch.
Answer: Real-time
Explanation:
GoodArray hackerrank solution for a number N, a goodArray is the smallest possible array that consists of only powers of two
Using the knowledge in computational language in python it is possible to write a code that smallest possible array that consists of only powers of two.
Writting the code in python:"public class GoodArray {"
"public static List<Integer> getQueryResults(long N, List<List<Integer>> queries) {"
"List<Integer> res = new ArrayList<>();"
int[][] arr = new int[queries.size()][3];
"List<Integer> goodArray = new ArrayList<>();"
"for (int i = 1; i <= N; i++) {"
"int num = i;"
"while (num % 2 == 0) {"
"goodArray.add(num);"
"num = num / 2;"
}
}
int index = 0;
for (List<Integer> l : queries) {
arr[index][0] = l.get(0);
arr[index][1] = l.get(1);
arr[index][2] = l.get(2);
index++;
}
Collections.sort(goodArray);
"for (int i = 0; i < arr.length; i++) {"
"int[] query = arr[i];"
int l = query[0];
int r = query[1];
int m = query[2];
int prod = 1;
"for (int j = l - 1; j <= r - 1; j++) {"
"prod = (int) (prod * goodArray.get(j)) % m;"
}
res.add(prod);
}
return res;
}
}
See more about python at brainly.com/question/18502436
#SPJ1
You have configured your Active Directory environment with multiple sites and have placed the appropriate resources in each of the sites. You are now trying to choose a protocol for the transfer of replication information between two sites. The connection between the two sites has the following characteristics:
In the above case, the protocol that meets these requirements is SMTP .
What is SMTP?SMTP or Simple Mail Transfer Protocol is known to be a kind of an application that is needed or that is often used to send, receive, and pass outgoing emails and this exist between senders and receivers.
Hence, in the above case, the protocol that meets these requirements is SMTP.
See the full question below
The link is generally unavailable during certain parts of the day because of an unreliable network provider. The replication transmission must be attempted whether the link is available or not. If the link was unavailable during a scheduled replication, the information should automatically be received after the link becomes available again. Replication traffic must be able to travel over a standard Internet connection. Which of the following protocols meets these requirements? A. IP B. SMTP C. RPC D. DHCP
Learn more about SMTP from
https://brainly.com/question/14396938
#SPJ1
True/False: A binary search looks for a desired item by comparing the search item to each data item in order, from first to last, until a match is found. Group of answer choices True
Answer: False
Explanation: a binary search divides the list into halves that could contain the item until it narrows down only to one item.
Weak passwords are a(n) ___________ threat
Answer: Employee
Explanation:
What are the three most important tasks accomplished at a party’s national convention are nominating the party’s?
The three most important tasks are:
The selection and naming the party's presidential and vice-presidential candidatesThe act of promoting party unityThe adopting of the party's platform.What is the task of a national convention?The formal aim of such a convention is to take the party's nominee for any popular election such as the President and also to adopt a idea of party principles and goals.
Hence, the three most important tasks are:
The selection and naming the party's presidential and vice-presidential candidatesThe act of promoting party unityThe adopting of the party's platform.Learn more about national convention from
https://brainly.com/question/2199497
#SPJ1
Steve wants to insert the copyright information in the webpages for the images used in the website. where would you recommend him to place this information?
I would recommend to Steve that he should insert or place the copyright information for the images used in the website in between the <footer>.....</footer>.
What is a website?A website can be defined as a collective name which connotes a series of webpages that are interconnected or linked together with the same domain name, so as to provide certain information to end users.
What is a webpage?A webpage can be defined as a hypertext document within a website and it usually has a unique uniform resource locator (URL).
In this scenario, I would recommend to Steve that he should insert or place the copyright information for the images used in the website in between the <footer>.....</footer> because they would appear underneath each of the webpages.
Read more on website here: https://brainly.com/question/26324021
#SPJ1