An iron-core solenoid of 31 cm length, 2 cm diameter, and 700 turns of wire has a magnetic field of 1.7 T when 51 A flows through the wire. The permeability at this high field strength is 16,000 μT/A.
The magnetic field inside a long solenoid is given by B = μ₀nI, where n is the number of turns per unit length and I is the current. Since the solenoid has an iron core, the magnetic field is increased by a factor of μᵣ, the relative permeability of iron. Therefore, we have B = μ₀μᵣnI, where μ₀ is the permeability of free space.
From the given data, the solenoid has a length of 0.31 m, a radius of 0.01 m, and 700 turns of wire. Thus, the number of turns per unit length is n = N/L = 700/0.31 = 2258.06 turns/m. The current flowing in the wire is I = 51 A, and the magnetic field inside the solenoid is B = 1.7 T.
Solving for μᵣ, we get μᵣ = B/(μ₀nI) = 1.7/(4π×10⁻⁷×2258.06×51) ≈ 399. Therefore, the permeability of the iron core at this high field strength is about 399 times the permeability of free space i.e 16,000 μT/A.
To know more about the iron-core solenoid refer here :
https://brainly.com/question/28334557#
#SPJ11
A box is being dragged across the floor at a constant speed by a rope pulling horizontally on it. Friction is not negligible.
A box is being dragged across the floor at a constant speed by a rope pulling horizontally on it. friction is not negligible. Weight (W), the normal force( N), and the tension force( T )in the string will all be forces operating on the box.
How does tension force work?The force transmitted through a rope, string, or wire while opposing forces pull it is referred to as the tension force.
Energy is drawn equally from both ends by the tension force, which is exerted along the entire length of the wire.
A box is being dragged across the floor at a constant speed by a horizontally pulling rope. Friction has a big impact.
As a result, the weight W, normal force N, and tension force T in the string will all be acting on the box.
Your question is incomplete but most probably your full question was
A box is being dragged across the floor at a constant speed by a rope pulling horizontally on it. friction is not negligible. identify all the forces acting on the box.
To learn more about the tension force refer to the link;
brainly.com/question/2287912
#SPJ4
what's an electric field ?
Answer:
Electric field is defined as the electric force per unit charge. Light, X- rays, radio waves, microwaves etc. contains electric field component's in it.
Explanation:
Answered by :
[tex] \pink{ \star} \pmb{ \text{ \pink{seolleaphrodite }}} \pink\star[/tex]
Answer:
a region around a charged particle or object within which a force would be exerted on other charged particles or objects.
How to change a flat tire presentation?
Having a flat tire is one of the predominant inconveniences of riding. A guide car jack is designed to raise the vehicle high sufficient to eliminate the flat tire.
Converting a tire is definitely an alternative bodily trauma. we need to place a few muscles in getting the lug nuts off and cranking the jack, after which you need to bend down and lift the tire. regularly, oldsters will try to do all of this in a rush to get on their way, however, it really is a mistake.
To change eliminate the flat tire. The following steps should be followed:-
A spare tire. A lug wrench or torque wrench.Wheel wedges.A transportable tire inflator.A tire gauge to read the endorsed tire strain.Having a flat tire is one of the predominant inconveniences of riding. while a terrific spare is unavailable, you both have to call a tow truck or repair the tire ourselves. luckily, the process of fixing it yourself is noticeably sincere and requires only a few gears.
Learn more about changing a flat tire here:-https://brainly.com/question/16264897
#SPJ4
A 5.0-kg bar of lead is placed inside a 12-L chamber filled with helium gas. The temperature of the lead and helium is the same. How do the average kinetic energies of the lead atoms and helium atoms compare
As the temperature of the lead and helium is the same. Thus the average kinetic energy is also the same for lead and helium.
Reason:
It is given that a 5.0-kg bar of lead is placed inside a 12-L chamber filled with helium gas. The temperature of the lead and helium is the same. It is required to compare the average kinetic energy of the lead atoms and helium atoms.
The average kinetic energy is calculated as, [tex]K=\frac{3}{2} \frac{R}{N} T[/tex].
Here K is the average kinetic energy, R is the gas constant, N is the Avogadro's number, and T is the temperature.
As the temperature is the same for both lead and helium. As a result, the average kinetic energy is also the same for lead and helium.
Learn more about average kinetic energy here,
https://brainly.com/question/1599923
#SPJ4
You are holding a positive charge and there are positive charges of equal magnitude 1 mm to your north and 1 mm to your east. What is the direction of the force on the charge you are holding
If I hold a positive charge in my hand and there are positive charges of equal magnitude 1 mm to your north and 1 mm to your east then the direction of the force on the charge I am holding is towards the north-east direction.
Reasoning:
It is given that there is a positive charge in my hand. There are two more positive charges with the same magnitude. One is 1 mm far towards the east, and the other one is 1 mm far towards the north. It is required to find the direction of the force acting on the charge in my hand.
Let the magnitude of the charge in my hand is Q, and the magnitude of the other charges is q.
Thus the electric force applied on the charge in my hand due to each other is,
[tex]F=\frac{kQq}{r^2}[/tex]
Here k is the Coulomb constant, and r is the distance between the charges.
It is also known that the force on a positive charge due to another positive charge is acted outwards.
Thus, the force on the charge due to the charge on the east is,
[tex]\vec{F_1}=\frac{kQq}{( 10^{-3}\text{ m})^2}\hat{i}[/tex]
And the force on the charge due to the charge on the north is,
[tex]\vec{F_2}=\frac{kQq}{( 10^{-3}\text{ m})^2}\hat{j}[/tex]
As the forces are equal in magnitude and one is perpendicular to the other, thus the net force will be acted at an angle of [tex]45^\circ[/tex] from the north or from the north direction.
Thus the net force is acting in the north-east direction.
Learn more about the direction of the force here,
https://brainly.com/question/2037071
#SPJ4
Why would we prefer to use the 0. 01uf capacitor in the feedback loop even though the circuit does not integrate quite as well over as large a range?
At 0 frequency (0Hz) or DC, the capacitor acts like an open circuit due to its reactance for this reason blocking off any output voltage feedback. As a result, little or no negative feedback is furnished from the output again to the input of the amplifier.
Therefore at low frequencies, the LPF has finite output and at high frequencies the output is nil, that's identical to an integrator circuit. for this reason, a low skip filter can be said to be worked as an integrator. Then the voltage variant in C may be very small.
A common op-amp circuit uses a remarks capacitor to limit the bandwidth. proscribing op-amp bandwidth will reduce noise, so a remarks capacitor is not an unusual way to reduce noise. To apprehend how the comments capacitor works, remember that a capacitor acts as a brief to “high frequency” AC indicators.
Learn more about frequency here: https://brainly.com/question/16148316
#SPJ4
A group of friends wants to go to the amusement park. They have no more
than $325 to spend on parking and admission. Parking is $11, and tickets cost
$39.25 per person, including tax. Use the drop-down menu below to write an
inequality representing p, the number of people who can go to the
amusement park.
Answer:
4x + 3
Explanation:
The number of people who can go to the amusement park is 8.
What is meant by mathematical inequality ?The mathematical expressions with inequalities are those with unequal sides on both sides. Unlike equations, we compare two values when we work with inequality.
Here,
The total amount they have, z = $325
Amount of parking charge, x = $11
Amount for ticket cost, y = $39.25
Let the number of people who can go to the amusement park be p.
So, the expression for the inequality can be written as,
x + yp = z
Applying the values of x, y and z,
11 + 39.25p ≤ 325
39.25p ≤ 325 - 11
39.25p ≤ 314
Therefore, the number of people who can go to the amusement park,
p ≤ 314/39.25
p ≤ 8
Hence,
The number of people who can go to the amusement park is 8.
To learn more about mathematical inequality, click:
https://brainly.com/question/19003099
#SPJ2
All of the following are true statements about phosphor storage plate (PSP) imaging system imaging plates except they:
All of the following are true statements about phosphor storage plate (PSP) imaging system imaging plates except they: should be autoclave.
AutoclaveAn autoclave is a device used in industrial and scientific procedures that call for higher temperature and pressure in comparison to ambient temperature. Before doing surgery, autoclaves are used to sterilize the area. In the chemical sector, autoclaves are used to vulcanize rubber, cure coatings, and perform hydrothermal synthesis. Industrial autoclaves are employed in a variety of industrial settings, particularly in the production of composite materials. Depending on the size of the load and the contents, many autoclaves sterilize equipment and supplies by exposing them to pressurized saturated steam at 121 °C (250 °F) for 30 to 60 minutes at a pressure of 15 psi.
Learn more about autoclave here:
https://brainly.com/question/14145243
#SPJ4
Which planet has the most extreme temperature difference between day and night?
Answer:
Explanation:
Mercury, the first planet from the Sun, endures drastic temperature changes from day to night. During the day, the planet is incredibly near to the Sun, with temperatures reaching 430°C.
How do the resistances of two conducting wires compare if they have the same length, but one is twice the radius of the other?.
The thicker wire has one-fourth the resistance of the thinner wire.
What are resistance and resistivity?The characteristic of a substance that prevents the flow of current is known as resistance. The free electrons begin to move in a specific direction when a voltage is applied across the conductor. These electrons collide with atoms or molecules as they move, creating heat in the process. These atoms or molecules prevent free electrons from moving through a substance. Resistance is represented by the symbol R.
Specific resistance is another name for resistivity. A substance with certain dimensions, such as one meter in length and a cross-sectional area of one square meter, has a resistance that is represented by its resistivity. Resistivity or specific resistance is represented by ρ.
The relation between resistance R and resistivity ρ is given as:
R = ρL/A
where,
R = resistance of the conductor
ρ = resistivity of the material
L = length of the conductor
A = cross-sectional area of the conductor
Calculation:Given,
r₁ = 2r₂
L₁ = L₂
where
r₁ = radius of the first conductor
r₂ = radius of the second conductor
L₁ = length of the first conductor
L₂ = length of the second conductor
To find
R₁/R₂ =? (the ratio of R₁ and R₂)
If the radius is twice the other then the area will become,
A₁ = π r₁²
A₂ = π r₂²
A₁ = π (2r₂)²
= 4π r₂²
Therefore,
A₁ = 4 A₂
Now put the values in formula,
R = ρL/A
R₁/R₂ = ρ L₁ A₂/ ρ L₂ A₁
R₁/R₂ = L A₂/ L (4A₂)
R₁/R₂ = 1/4
R₁ = R₂/4
Hence, the thicker wire with twice the radius of thin wire has one-fourth the resistance of the thinner wire.
I understand the question you are looking for is this:
How do the resistances of two conducting wires compare if they have the same length, but one is twice the radius of the other?
(a) The thicker wire has half the resistance of the thinner wire
(b) The resistance is the same in both wires
(c) The thicker wire has one-fourth the resistance of the thinner wire
(d) The thicker wire has twice the resistance of the thinner wire.
Learn more about resistance here:
https://brainly.com/question/14547003
#SPJ4
In a series lrc circuit, the frequency at which the circuit is at resonance is f0. If you double the resistance, the inductance, the capacitance, and the voltage amplitude of the ac source, what is the new resonance frequency?.
When you double capacitance and inductance, the new resonance frequency becomes f/2.
Resonance frequency:The resonance frequency of RLC series circuit, is the frequency at which the capacity reactance is equal to inductive reactance.
It can also be defined as the natural frequency of an object where it tends to vibrate at a higher amplitude.
Xc = Xl
which gives the value for resonance frequency:
[tex]f = \frac{1}{2\pi \sqrt{LC} }[/tex]
where;
f is the resonance frequency
L is the inductance
C is the capacitance
When you double capacitance and inductance, the new resonance frequency becomes;
[tex]f' = \frac{1}{2\pi \sqrt{2L2C} }[/tex]
[tex]f' = \frac{1}{2\pi \sqrt{4LC} }[/tex]
[tex]f' = \frac{1}{\pi \sqrt{LC} }\frac{1}{2}[/tex]
[tex]f' = \frac{1}{2} f[/tex]
Thus from above,
When you double capacitance and inductance, the new resonance frequency becomes f/2.
Learn more about resonance frequency here:
https://brainly.com/question/13040523
#SPJ4
Far in space, where gravity is negligible, a 465 kg rocket traveling at 75.0 m/s in the positive x-direction fires its engines. The figure (Figure 1)shows the thrust force as a function of time. The mass lost by the rocket during these 30.0 s is negligible.
The impulse generated by the rocket is 15000 Ns
What is Impulse?In classical mechanics, the integral of a force, F, over the time period over which it acts, t, is known as the impulse (abbreviated J or Imp).Impulse is a vector quantity because force is one as well. When an item receives an impulse, its linear momentum also changes in the opposite direction in an analogous vector. The kilogram meter per second (kg m/s), which is dimensionally identical to the kilogram second (Ns), is the SI unit for momentum.For as long as it acts, a resultant force generates acceleration and a change in the body's velocity. The change in momentum is equal to the product of the average force and duration, hence a resultant force delivered over a longer period of time results in a greater change in linear momentum than a resultant force applied quickly.Solution:
Mass of the rocket = 465kg
Velocity of the rocket = 75m/s
Time taken = 30s
Impulse = [tex]I = F \Delta t[/tex]
[tex]I = \int F(t)dt[/tex]
Impulse so generated is equal to the area of triangle
I = [tex]\frac{1}{2} \times 30\times1000[/tex]
I = 15000 Ns
know more about impulse
https://brainly.com/question/904448
#SPJ4
Explain how energy balance sets planetary temperature? Imagine a planet colder than expected for energy balance and explain why it warms up just enough to achieve energy balance but no more (assume no greenhouse gases).
The planetary temperature energy balance is obtained by radiating back the absorbed radiation energy from outer-space, by the planet and thus acquiring thermal equilibrium.
What is the process of attaining thermal equilibrium by Earth?
The Stefan-Boltzmann law states that the more the temperature a planet has, the more it will radiate out to reach thermal equilibrium.
We know that outer space contains large masses of radiative energy freely distributed in its vast expanse. A small fraction of this energy is absorbed by the Earth through the atmosphere, surface land, clouds etc.
Now, radiative balance is achieved when a planet's surface continuously warms up until it reaches its peak at which point the same amount of absorbed energy can then be radiated back to space. The relative amount of energy radiated back by a planet is dependent upon the size of the planet.
A colder planet relatively absorbs lower amount of radiation energy from space. In some time, as the planet heats up enough, the energy is radiated back to the space attaining thermal equilibrium.
Learn more about Stefan-Boltzmann law here:
https://brainly.com/question/14919749
#SPJ4
What is the speed of a wave that has a frequency of 220 Hz and a wavelength
of 0.39 m?
A. 564 m/s
OB. 85.8 m/s
OC. 0.01 m/s
D. 0.002 m/s
Answer:
B 85.8m/s
Explanation:
frequency(Hz) = 220
wavelength(m) = 0.39
formula for Speed of a wave
Speed = Wavelength x Frequency
speed = 0.39 × 220
speed = 85.8m/s
i hope this helped
Answer: B. 85.8 m/s ✅
Explanation: The speed of a wave can be calculated using the equation:
Velocity = Frequency * Wavelength
Given that the frequency of the wave is 220 Hz and the wavelength is 0.39 m, we can plug these values into the equation:
Velocity = 220 Hz * 0.39 m
The speed of the wave is 85.8 m/s or approximately 309 km/h or 192 mi/h ✅
PLEASEEEE GIVE BRANLIEST
If I connect an inductor (L) to a capacitor (C), I will get an LC oscillator circuit with some natural frequency omega. If I were to quadruple the capacitance of the circuit, what would be the new natural frequency
The new natural frequency would be ω/2.
we know that,
[tex]f = \frac{1}{2 pi \sqrt{LC} }[/tex] = ω. -> equation 1
now, when capacitance is quadrupled,
[tex]f' = \frac{1}{2 pi \sqrt{L ( 4C )} }[/tex]
[tex]f' = \frac{1}{2 pi (2)\sqrt{LC} }[/tex]. -> equation 2
substituting value of equation 1 in equation 2 , we get,
[tex]f' = \frac{w}{2}[/tex]
Hence, the new natural frequency of the circuit is ω/2.
what do you mean by frequency ?
The resonant frequency for a particular circuit is the frequency at which this equality stands true. Where L is the inductance in henries and C is the capacitance in farads, this is the LC circuit's resonant frequency.
Learn more about frequency here:-
https://brainly.com/question/12530980
#SPJ4
In example 18. 4 of the text, the deflection angle of the laser beam as it exits the prism is 22. 6º. If the prism had been made of glass instead of polystyrene plastic, what would the deflection angle have been?.
The deflection angle would have been 37.29º if the prism had been made of polystyrene plastic.
What is the deflection angle?
A deflection angle is an angle between the onward extension of the previous leg and the line ahead.
Here,
deflection angle as laser enters the beam, B = 22.6º
refraction index of glass, n1= 1.52
refraction index of polystyrene plastic, n2 = 1.59
for the second surface,
B = 45º - 22.6º
B = 22.40º
According to Snell's law:
n1 sinФ1 = n2 sinФ2
sin B / sinФ = n1 / n2
sinФ = (sin 22.40º) * ( 1/ 1.59)
Ф = 37.29º
Thus,
The deflection angle would have been 37.29º if the prism had been made of polystyrene plastic.
Learn more about deflection angle here:
https://brainly.com/question/22953155
#SPJ4
When hydrogen is fused into helium, energy is released from Choose one: A. the increase in pressure. B. the decrease in the gravitational field. C. conversion of mass to energy. D. gravitational collapse.
The nuclear fusion of hydrogen atoms releases a huge amount of energy. So the correct choice is C. Conversion of mass to energy.
What is nuclear fusion?
When two small nuclei join to form a new nucleus, then this process is termed nuclear fusion. A huge amount of energy is released when there occurs nuclear fusion between the two nuclei. And a new element is formed.
It has been observed that the amount of energy released in nuclear fusion is equal to the mass difference between the mass of the formed nucleus and the total mass of old nuclei. Hence in the nuclear fusion of hydrogen nuclei to form a helium nucleus, the energy is released due to the conversion of mass into energy.
The pressure is increased to make the hydrogen atoms fuse but this change in pressure does not contribute to the energy released in the fusion of hydrogen.
The magnitude of the gravitational field is too low and it does not contribute to the energy released in the fusion of hydrogen.
The gravitational collapse does not occur between the two hydrogen atoms. This phenomenon occurs in celestial bodies so this also does not contribute to the energy released in the fusion of hydrogen.
Learn more about nuclear fusion here:
https://brainly.com/question/10165218
#SPJ4
A 500 watt heater carries a current of 4 A. What is the voltage across the ends of the heating element
The voltage across the ends of the heating element is 125 volts.
VoltagePower = 500J/s = 500 Watts. I = 4A
V*I = 500
V = 500/I = 500/4 = 125 Volts.
The difference between two points' electric potentials, also known as electric potential difference, electric potential pressure, or electric tension, is what moves a test charge between the two points in a static electric field. The derived unit for voltage (potential difference) in the International System of Units is called volt. 166 Work per unit charge is stated in SI units as joules per coulomb, with 1 volt equaling 1 joule (of work) for 1 coulomb (of charge). The quantum Hall and Josephson effect was first used to define the volt in the old SI system in 1990. More recently, fundamental physical constants have been included to the definition of the volt in the new SI system.
Learn more about voltage here:
https://brainly.com/question/2364325
#SPJ4
A banked circular highway curve is designed for traffic moving at 60 km/h. The radius of the curve is 200 m. Traffic is moving along the highway at 40 km/h on a rainy day. What is the minimum coefficient of friction between tires and road that will allow cars to take the turn without sliding off the road
The minimum coefficient of friction which allow cars to take the turn without sliding off the road is 0.617
What is friction force:Friction is the force resisting the relative motion of the surface sliding against each other.
here, given that
m = mass of car
The velocity of the cars, v= 60 km/h = 17 m/s
The radius of the curve, R =200 m.
The velocity of the cars on the highway curve, v' = 40 km/h = 11 m/s
In order to allow the cars to take the turn without sliding off the road, the Centripetal Force must be equal to the frictional force between the tires of the car and road.
Centripetal Force = Frictional Force
centripetal force = mv²/r friction force = μRmv²/r = μR
here
R = Normal Reaction = Weight of Car = mg
Therefore,
mv²/r = μmg
μ = v²/gr
μ = (11)² / (9.8)(200)
μ = 0.0617
hence
The minimum coefficient of friction which allow cars to take the turn without sliding off the road is 0.617
Learn more about coefficient of friction here:
https://brainly.com/question/13754413
#SPJ4
When a car driving up a hill with constant speed: I. its kinetic energy is decreasing. II. its potential energy is constant. III. its total mechanical energy is constant. Group of answer choices II I III none of the above
A car driving up a hill at a constant speed experiences no change in its kinetic energy while it's potential energy increases with increasing height, thus none of the options are correct.
Understanding the concept
Consider a car moving up the hill at a constant speed as shown in the figure below. The following forces act on the car:
N is the normal reaction force acting in an upward directionf_s is the static friction force exerted due to friction between the road and the tires of the carf_k is the rolling friction force in the direction opposing that of the tiremg is the force acting in a downward direction.θ is the angle of inclination.Here as the car is moving up the hill at a constant speed, the net force exerted on the car is zero. Also, the kinetic energy of the car will not change as its velocity is constant and the potential energy will change with increasing height. Thus, none of the given options are correct.
Learn more about motion on an incline here:
https://brainly.com/question/13513083
#SPJ4
Two metal balls are the same size, but one weighs twice as much as the other. The balls are dropped from the top of a two story building at the same instant of time. The time it takes the balls to reach the ground below will be:
The time taken by the metal balls of the same size but different weight, to reach the ground will be the same.
Reason behind:
Two metal balls are the same size, but one weighs twice as much as the other. The balls are dropped from the top of a two-story building at the same instant of time. It is required to find the time taken by the balls to reach the ground.
In free fall, all objects experience the same acceleration owing to gravity when they are close to the earth.
[tex]g=9.8 \text{ m/s}^2[/tex] is the measure of gravitational acceleration.
Because of this, the two metal balls are the same size but have different masses. The air resistance for both balls will be the same due to their similar sizes. Let, g' be the acceleration in the presence of air resistance. The balls are both discharged at once.
From a height of h, both balls descend due to gravity G'.
Therefore, the time taken by both balls is:
[tex]\begin{aligned}&s=u t+\frac{1}{2} g t^{2} \\&u=0, s=h \\&t=\sqrt{\frac{2 h}{g}}\end{aligned}[/tex]
Therefore, the time is independent of mass. Thus the time taken by both the balls, will be about the same.
Learn more about time taken by metal ball to reach the ground here,
https://brainly.com/question/22719691
#SPJ4
White lights can sometimes be found on what kind of buoys?
a. daytime buoys
b. green buoys
c. red buoys
White lights can sometimes be found on red buoys.
Hence, Option C is correct answer.
How can we understand that White lights can sometimes be found on red buoys?Buoys consist of a float, mooring chain and anchor. They may be equipped with lights and/or sound signals such as bells, gongs, or whistles.We know that, Red buoys are found on the starboard side of a channel when entering from seaward and can be lighted buoys, nuns, or triangular daymarks. Red buoys, if lit, have red or white lights, and the light pattern can be fixed, flashing, occulting, quick–flashing, or of equal intervals.Thus from the above conclusion we can say that White lights can sometimes be found on red buoys.
Hence, Option C is correct answer.
Learn more about buoys here:
https://brainly.com/question/2721533
#SPJ1
At the end of a quiet inspiration, an additional volume of air can be inhaled. What is this additional amount of air called
Inspiratory reserve volume is the additional amount of air that can be inhaled at the end of quiet inspiration.
Inhalation : The act of drawing air into the lungs during inspiration, also known as inhalation.
By establishing a pressure differential between the lungs and the atmosphere, it is accomplished.
The diaphragm contracts toward the abdominal cavity as air enters the lungs, creating more room in the thoracic cavity for the air to fit.
Inspiratory reserve volume is the additional volume of air that can be maximally inspired after finishing a typical, quiet inspiration.
Or the volume of air that can be inhaled following a regular breath is known as the inspiratory reserve volume.
It is denoted by IRV.
In men average IRV is 3.3 L whereas in women it is about 1.9 L
Hence, Inspiratory reserve volume is the additional amount of air that can be inhaled at the end of quiet inspiration.
Learn more about Inspiration and Expiration here https://brainly.com/question/14955835
#SPJ1
Example of a solid that sunlines is ( ? )
An example of a solid that sunlines is a billboard.
What is a billboard?A billboard simply refers to a very large board which is usually, frequently and most of the time used for displaying advertisements
So therefore, an example of a solid that sunlines is a billboard
Learn more about billboard:
https://brainly.com/question/26961773
#SPJ1
A large raindrop--the type that lands with a definite splat--has a mass of 0. 014 g and hits your roof at a speed of 8. 1 m/s.
(a) The magnitude of the impulse delivered to your roof is 1.134 × 10⁻⁴ kg m/s.
(b) The magnitude of the force of the impact is 0.307 N.
Given that,
Mass of the rain drop is m = 0.014 g = 0.014 × 10⁻³ kg
Speed of the rain v = 8.1 m/s
Time of motion t = 0.37 ms = 0.37× 10⁻³ s
The following formula is used to determine the roof impulse,
J = ΔP = m× v
⇒ (0.014 × 10⁻³)× 8.1 = 1.134 × 10⁻⁴ kg m/s
Newton's second law of motion is used to compute the force of impact in the following ways,
F = m × a
F = [(0.014× 10⁻³) 8.1]/(0.37× 10⁻³) = 0.307 N
The given question is incomplete. The complete question is 'a. What is the magnitude of the impulse delivered to your roof?
b. If the raindrop comes to rest in 0. 37 ms, what is the magnitude of the
average force of the impact?'
To know more about impulse:
https://brainly.com/question/30055515
#SPJ4
An 80,000 kg plane is flying at 900 km/h at a height of 10 kilometers. What is its total mechanical energy? Group of answer choices 478 MJ 250 MJ 10,340 MJ 773 MJ
The mechanical energy of the given flying object is 10,340 MJ. So the correct choice is 10,340 MJ.
Mechanical energy: The mechanical energy of an object is the sum of its potential energy and kinetic energy.
The formula for the mechanical energy E is:
E=K+U
where K is the kinetic energy and U is the potential energy.
Kinetic energy: The energy possessed by an object due to the motion.
The kinetic energy is given by the formula,
K=(1/2)*(mv^2)
where m is the mass of the object and v is the velocity of the object.
Potential energy: The energy possessed by an object due to its relative position from a given point.
The potential energy is given by the formula,
U=m*g*h
where g is the acceleration due to gravity and h is the height of the object from the ground.
Substitute K=(1/2)*(mv^2) and U=m*g*h in the formula of the mechanical energy to get the following formula,
E=(1/2)*(mv^2)+m*g*h
Given that m=80000 kg, h=10 km, and v=900 km/h, and the value of g is 9.8 m/s^(-2), the value of the total mechanical energy is,
E=(1/2)*(80,000 kg)(900 km/h )^2+(80,000 kg)*(9.8 m/s^(-2))*(10 km)
Note: 1 km= 1000 m and 1 km/h = 5/18 m/s. 1 MJ = 10^(6) J
E=(1/2)*(80,000 kg)*(900*(5/18) m/s )^2+(80000 kg)*(9.8 m/s^(-2))*(10000 m)
E=(1/2)*(80,000 kg)*(250 m/s)^2+7840*10^(6) J
E=2500*10^(6) J+7840*10^(6) J
E=10340*10^(6) J
E=10340 MJ
Learn more about Potential energy here:
https://brainly.com/question/15647581
#SPJ4
While the skin has the ability to block uv light which may cause damage, it also has the ability to absorb:__________
While the skin has the ability to block UV light which may cause damage, it also has the ability to absorb Drugs.
Skin is the largest organ of the body. It is usually soft, and flexible outer tissue. It is involved in Protection, Sensation and Regulation. It has the ability to Block UV light through Melanin and it has ability to absorb drugs through the Dermal Absorption through the skin. It is porous and hence has the ability to absorb:
DrugsAcrylatesPharmaceutical productsIsocyanatesMercuryPolychlorinated biphenyls (PCB)Some nutrients like Vitamin E, Vitamin CHyaluronic acidHair follicles and the pores absorbs the best present all over the body.
Substances can enter the skin through openings, getting absorbed into the dermis where blood vessels nourish the skin.
Learn more about Drugs here, https://brainly.com/question/13294633
#SPJ1
Use the periodic table to answer this question.
Decomposing calcium carbonate yields calcium oxide and carbon dioxide.
What information is needed to calculate the mass of calcium oxide that can be produced from 4.7 kg of calcium carbonate?
A.molar masses of calcium, carbon, and oxygen
B.the balanced chemical equation
C.number of molecules of calcium carbonate
D.molar mass of calcium carbonate
You need the atomic mass of calcium, oxygen and carbo, the balanced chemical equation and the molar ratio between Calcium carbonate and calcium oxide.
1. If you know the atomic mass of the elements, you can calculate the molar mass of Calcium Carbonate (CaCO3) and the mass of Calcium Oxide (CaO).
2. The balanced equation is CaCO3 -> CaO + CO2
3. The molar ratio between CaCO3 and CaO is 1:1, which means that the descomposing of one mole of calcium carbonate produce one mole of calcium oxide.
4- The last thing you should do is to conver the 4.7 kg of CaCO3 to moles and with the molar ratio calculate the mass of CaO
Explanation:
Any confusions you may ask!
According to the superstring theories, gravitation has its own energy-sharing particles called _____, analogous to photons and electromagnetism.
Graviton
Graviton, postulated quantum that is thought to be the carrier of the gravitational field. It is analogous to the well-established photon of the electromagnetic field.
What is Superstring theories ?String theory states that everything in our Universe is made up of tiny vibrating strings. These strings are one dimensional objects and are identical to one another.
Every fundamental particle that we know such as electrons, quarks, photons, gluons, etc are made up of these strings.String theory has contributed a number of advances to mathematical physics, which have been applied to a variety of problems in black hole physics, early universe cosmologyLearn more about Superstring theories here:
https://brainly.com/question/7538238
#SPJ4
A transformer is used to convert 120 V household electricity to 6 V for use in a portable CD player. If the primary coil connected to the outlet has 1000 turns, how many turns does the secondary coil have
The number of turns in the secondary coil of the transformer is 50.
What is a Transformer?
The transformer is a device used to increase or decrease the input voltage.
The ratio of the output voltage to the input voltage gives the turn ratio of the secondary coil and the primary coil. The ratio is given by the formula,
V2/V1=n2/n1
where V2 is the output voltage, V1 is the input voltage, n2 is the number of turns on the secondary coil and n1 is the number of turns on the primary coil.
Given V1=120 V, V2= 6 V, and n1=1000 turns, substitute these values in the above formula and solve it to get the value of n2.
6/120 = n2/1000
n2=6*1000/120
n2=50
Learn more about transformers here:
https://brainly.com/question/14038110
#SPJ4