please i seriously need step-by-step on this tyty

The three numbers are x = y = 9.625 and z = 0.75, and the maximum value of the quantity 2 is 20.375

We can use the AM-GM inequality to maximize the quantity 2.

From the given equation, we have:

1/yxz = 20

Multiplying both sides by yxz, we get:

1 = 20yxz

yxz = 1/20

Now, let's consider the sum of the three numbers:

x + y + z = 20

Using the AM-GM inequality, we have:

[tex](x + y + z)/3 > = (xyz)^{(1/3)}[/tex]

Substituting the value of xyz, we get:

[tex](x + y + z)/3 > = (1/20)^{(1/3)}[/tex]

(x + y + z)/3 >= 0.25

Multiplying both sides by 3, we get:

x + y + z >= 0.75

Since we want the sum of the numbers to be exactly 20, we can rewrite this as:

20 - x - y >= 0.75

x + y <= 19.25

So, the sum of x and y must be less than or equal to 19.25.

To maximize the quantity 2, we can take x = y = 9.625 and z = 0.75,

since this makes the sum of x and y as close to 19.25 as possible while still satisfying the equation and being positive.

Therefore, the three numbers are x = y = 9.625 and z = 0.75, and the maximum value of the quantity 2 is:

2(x + yz) = 2(9.625 + 0.75*0.75) = 20.375/

For similar question on inequality.

https://brainly.com/question/24372553

#SPJ11

To find positive number whose sum is 20 and the quantity 2 is maximized, we can use the AM-GM inequality. According to this inequality, the arithmetic mean of a set of positive numbers is always greater than or equal to their geometric mean. That is,

(a + b + c)/3 ≥ (abc)^(1/3)

Now, we need to rearrange the equation 1/yxz = 20 to get the values of a, b, and c. We can rewrite it as yxz = 1/20.

Next, we can assume that a + b + c = 20 and apply the AM-GM inequality to the product abc to maximize the value of 2. That is,

2 = 2(abc)^(1/3) ≤ (a + b + c)/3

Hence, the maximum value of 2 is 2(20/3)^(1/3), which occurs when a = b = c = 20/3.

Therefore, the positive numbers whose sum is 20 and the quantity 2 is maximized are 20/3, 20/3, and 20/3.
To maximize the quantity 2 with the given equation 1/(yxz) = 20 and positive numbers whose sum is 20 (x+y+z=20), we first rewrite the equation as yxz = 1/20. Now, using the Arithmetic Mean-Geometric Mean (AM-GM) inequality, we have:

(x+y+z)/3 ≥ ((xyz)^(1/3))

Since x, y, and z are positive, we can say that:

20/3 ≥ ((1/20)^(1/3))

From here, we find that x, y, and z should be as close to each other as possible to maximize the quantity 2. One such possible solution is x = y = 19/3 and z = 2/3. Therefore, the positive numbers x, y, and z are approximately 19/3, 19/3, and 2/3, which maximizes the quantity 2.

Learn more about Arithmetic Mean-Geometric Mean here: brainly.com/question/31962103

#SPJ11

(a)  The cumulative distribution function F(t) = 0 for t<0, F(t) = t/a for 0<=t<=a, and F(t) = 1 for t>a.

(b)  The reliability function R(t) = 1 for t<0, R(t) = 1-t/a for 0<=t<=a, and R(t) = 0 for t>a.

(c) The hazard rate h(t) = 1/t for 0<t<=a, and the failure rate is decreasing.

(d)  The mean time to failure MTTF = a/2 and tmedian = a/2.

(e) p(T > a) = 0 and the uniform distribution does not have the memoryless property.

(a) The cumulative distribution function (CDF) for a uniform distribution over (0,a] is given by:

F(t) = P(T ≤ t) =

{ 0 if t < 0,

{ t/a if 0 ≤ t ≤ a,

{ 1 if t > a.

(b) The reliability function is defined as R(t) = 1 - F(t).

Therefore, for the uniform distribution over (0,a], we have:

R(t) =

{ 1 if t < 0,

{ 1 - t/a if 0 ≤ t ≤ a,

{ 0 if t > a.

(c) The hazard rate h(t) is defined as the instantaneous rate of failure at time t, given that the system has survived up to time t.

It is given by:

h(t) = f(t) / R(t),

where f(t) is the probability density function (PDF) of the distribution.

For the uniform distribution over (0,a], the PDF is constant over the interval (0,a], and zero elsewhere:

f(t) =

{ 1/a if 0 < t ≤ a,

{ 0 otherwise.

Therefore, we have:

h(t) =

{ 1/t if 0 < t ≤ a,

{ undefined if t ≤ 0 or t > a.

Since the hazard rate is decreasing with time, the failure rate is also decreasing.

This means that the system is more likely to fail early on than later on.

(d) The mean time to failure (MTTF) is given by:

MTTF = ∫₀ᵃ t f(t) dt = ∫₀ᵃ t/a dt = a/2.

The median time to failure (tmedian) is the time t such that F(t) = 0.5. Since F(t) is a linear function over the interval (0,a], we have:

tmedian = a/2.

(e) The probability that T > a is zero, since the uniform distribution is defined over the interval (0,a]. Therefore, p(T > a) = 0.

The uniform distribution does not have the memoryless property, which states that the probability of failure in the next time interval depends only on the length of the interval and not on how long the system has already been operating.

The uniform distribution is not memoryless because as time passes, the probability of failure increases, unlike in a memoryless distribution where the probability of failure remains constant over time.

For similar question on cumulative distribution function.

https://brainly.com/question/17074573

#SPJ11

Stone columns called stelae were covered in writing that traces family and military history. ​

When derived from Latin, a stele, or alternatively stela, is a stone or wooden slab that was built as a memorial in antiquity and is often taller than it is wide. Steles frequently have text, decoration, or both on their surface. These could be painted, in relief carved, or inscribed. Numerous reasons led to the creation of stele.

Some of the most impressive Mayan artifacts are stone columns known as stelae, which show portraits of the rulers along with family trees and conquest tales.

Learn more about columns at;

https://brainly.com/question/8515224

#SPJ4

complete question;

Stone columns called ---------------were covered in writing that traces family and military history. ​

Answer:

152 miles away

Step-by-step explanation:

i dont have an explanation srry

Answer:

see explanation

Step-by-step explanation:

180° on the line is a straight angle

the simplified expression is (cos(x) - sin(x))/cos(x).

We can use the fact that cot(x) = 1/tan(x) and csc(x) = 1/sin(x) to simplify the expression:

tan(x)(cot(x) - csc(x)) = tan(x)(1/tan(x) - 1/sin(x))

= tan(x)/tan(x) - tan(x)/sin(x)

= 1 - sin(x)/cos(x)

= (cos(x) - sin(x))/cos(x)

what is expression?

In mathematics, an expression is a combination of symbols and/or values that represents a mathematical quantity or relationship between quantities. Expressions can involve variables, numbers, and mathematical operations such as addition, subtraction, multiplication, division, exponents, and roots.

For example, "2 + 3" is an expression that represents the sum of the numbers 2 and 3, and "x^2 - 3x + 2" is an expression that involves the variable x and represents a quadratic function. Expressions can be used to simplify or evaluate mathematical equations and formulas, and they are a fundamental part of algebra, calculus, and other branches of mathematics.

To learn more about mathematical visit:

brainly.com/question/15209879

#SPJ11

The image is located 6.7 cm behind the lens, and is 3.7 cm tall (1.34 times the height of the object).

Using the thin lens equation, we can find the position of the image formed by the lens:

1/f = 1/d0 + 1/di

where f is the focal length of the lens, d0 is the object distance (the distance between the object and the lens), and di is the image distance (the distance between the lens and the image).

Substituting the given values, we get:

1/20 = 1/5 + 1/di

Solving for di, we get:

di = 6.7 cm

This tells us that the image is formed 6.7 cm behind the lens.

To find the height of the image, we can use the magnification equation:

m = -di/d0

where m is the magnification (negative for an inverted image).

Substituting the given values, we get:

m = -(6.7 cm)/(5.0 cm) = -1.34

This tells us that the image is 1.34 times the size of the object, and is inverted.

Know more about lens here:

https://brainly.com/question/29834071

#SPJ11

The negative sign indicates an inverted image. Thus, the image formed is located 8.0 cm from the lens and has a height of 1.6 times that of the object, making it 4.48 cm in height.

In this scenario, an object with a height of 2.8 cm is positioned 5.0 cm in front of a converging lens with a focal length of 20 cm. To determine the location and size of the image formed by the lens, we can use the lens formula and magnification formula.

The lens formula states that 1/f = 1/v - 1/u, where f is the focal length, v is the image distance, and u is the object distance. Substituting the given values into the lens formula, we find:

1/20 = 1/v - 1/(-5.0)

Simplifying this equation yields:

1/v = 1/20 + 1/5.0

Solving for v, we obtain:

v = 8.0 cm

The positive value indicates that the image is formed on the opposite side of the lens. The magnification formula, M = -v/u, allows us to calculate the magnification of the image:

M = -8.0/-5.0 = 1.6

To learn more about height :

https://brainly.com/question/28990670

#SPJ11

The general solution of the system of differential equations is:

x1 = X1t + X2t + C1

x2 = [tex](1/5)Ce^t - (4/5)X1[/tex]

X1, X2, C1, and C are arbitrary constants.

System of differential equations:

x1' = X1 + X2

x2 = 4x1 + x2

To decouple this system, we first solve for x1' in terms of X1 and X2:

x1' = X1 + X2

Next, we differentiate the second equation with respect to time t:

x2' = 4x1' + x2'

Substituting x1' = X1 + X2, we get:

x2' = 4(X1 + X2) + x2'

Rearranging this equation, we get:

x2' - x2 = 4X1 + 4X2

This is a first-order linear differential equation.

To solve for x2, we first find the integrating factor:

μ(t) = [tex]e^{(-t)[/tex]

Multiplying both sides of the equation by μ(t), we get:

[tex]e^{(-t)}x2' - e^{(-t)}x2 = 4e^{(-t)}X1 + 4e^{(-t)}X2[/tex]

Applying the product rule of differentiation to the left side, we get:

[tex](d/dt)(e^{(-t)}x2) = 4e^{(-t)}X1 + 4e^{(-t)}X2[/tex]

Integrating both sides with respect to t, we get:

[tex]e^{(-t)}x2 = -4X1e^{(-t)} - 4X2e^{(-t)} + C[/tex]

where C is an arbitrary constant of integration.

Solving for x2, we get:

[tex]x2 = Ce^t - 4X1 - 4X2[/tex]

Now, we have two decoupled differential equations:

x1' = X1 + X2

[tex]x2 = Ce^t - 4X1 - 4X2[/tex]

To find the general solution, we first solve for x1:

x1' = X1 + X2

=> x1 = ∫(X1 + X2)dt

=> x1 = X1t + X2t + C1

where C1 is an arbitrary constant of integration.

Substituting x1 into the equation for x2, we get:

x2 = [tex]Ce^t[/tex]- 4X1 - 4X2

=> x2 + 4x2 = [tex]Ce^t[/tex]- 4X1

=> 5x2 = [tex]Ce^t - 4X1[/tex]

=> x2 =[tex](1/5)Ce^t - (4/5)X1[/tex]

Absorbed the constant -4X1 into the constant C.

For similar questions on system of differential

https://brainly.com/question/31383370

#SPJ11

The general solution of the given system of differential equations is:

x1 = c1cos((sqrt(23)/8)t) + c2sin((sqrt(23)/8)t) + (3/4)c3

x2 = (3/2)c1sin((sqrt(23)/8)t) - (3/2)c2cos((sqrt(23)/8)t) + 4c3

The given system of differential equations is:

x;' = X1 + X2

x2 = 4x1 + x2

To decouple the system, we need to eliminate one of the variables from the first equation. We can do this by rearranging the second equation as:

x1 = (x2 - x2)/4

Substituting this in the first equation, we get:

x;' = X1 + X2

= (x2 - x1)/4 + x2

= (3/4)x2 - (1/4)x1

Now, we can write the system as:

x;' = (3/4)x2 - (1/4)x1

x2 = 4x1 + x2

To solve this system, we can use the standard method of finding the characteristic equation:

| λ - (3/4) 1/4 |

| -4 1 |

Expanding along the first row, we get:

λ(λ-3/4) - 1/4(-4) = 0

λ^2 - (3/4)λ + 1 = 0

Solving for λ using the quadratic formula, we get:

λ = (3/8) ± (sqrt(9/64 - 1))/8

λ = (3/8) ± (sqrt(23)/8)i

Therefore, the general solution of the system is:

x1 = c1cos((sqrt(23)/8)t) + c2sin((sqrt(23)/8)t) + (3/4)c3

x2 = (3/2)c1sin((sqrt(23)/8)t) - (3/2)c2cos((sqrt(23)/8)t) + 4c3

where c1, c2, and c3 are constants determined by the initial conditions.

To learn more about differential equations, click here: https://brainly.com/question/25731911

#SPJ11

The piecewise function to represent the amount A Sam owes after m months is A ( m ) = { 1500 - 50 m, if 0 ≤ m ≤ 12

{ 1500 - 50 (12) - 75 (m - 12), if m > 12

For the initial twelve months (0 ≤ m ≤ 12), Sam pays a monthly installment of $50. As a result, his remaining debt after m months will be equal to the starting loan amount ($ 1500) reduced by the cumulative total that he had paid back during said year ($50 x m).

Beyond the first year (m > 12), Sam is liable for a payment of $75 each month. Having already satisfied the former fee of $50 per month over the course of a full calendar year, his indebtedness afterwards becomes the remaining balance post-first year ( $1500 - 50 ( 12 )) decreased by his collective cost at $75 per month since then ( $75 x ( m - 12 )).

The piecewise function is therefore:

A ( m ) = { 1500 - 50 m, if 0 ≤ m ≤ 12

{ 1500 - 50 (12) - 75 (m - 12), if m > 12

Find out more on piecewise functions at https://brainly.com/question/28610599

#SPJ1

The volume of the freezer can be calculated by multiplying its length, width, and height. Therefore, the volume of the freezer in cubic inches is:

V = 36 * 24.5 * 72.5 = 64,620 cubic inches

Therefore, the volume of the freezer is 64,620 cubic inches.

The equation of the linear function is f(x) = 20x - 150.

To find the equation of the linear function, we need to find the slope and the y-intercept.

Using the given points, we can find the slope:

slope = (f(9) - f(6)) / (9 - 6) = (30 - (-30)) / 3 = 20

Now, to find the y-intercept, we can use one of the points. Let's use (6, -30):

y - y1 = m(x - x1)

y - (-30) = 20(x - 6)

y + 30 = 20x - 120

y = 20x - 150

Therefore, the equation of the linear function is f(x) = 20x - 150.

Learn more about linear function here

https://brainly.com/question/2248255

#SPJ11

The shear stress acting along the seam is 159.94 kPa.

We need to determine shear stress acting along the seam.

First, we are going to determine horizontal stress components at 0°. Then, using transformation formulas.

To find stress along the inclined seam.

We need to determine the cross-sectional area of the tube so we can calculate stress components.

A = π [tex](100/2)^{2}[/tex] -  [tex](100-4/2)^{2}[/tex]

= 615.8 [tex]mm^{2}[/tex]

= 6.16 * [tex]10^{-4} m^{2}[/tex]

Since the tube is only subjected to horizontal compressive force P at 0° there is only a normal stress component σ_x.

σ_x = P/A

​ σ_x = -200/6.16 * [tex]10^{-4}[/tex]

= -324806 Pa

Now we can apply the transformation formula for the shear stress component (9-2).

[tex]T_{x'}_{y'}[/tex] = - σ_x -  σ_y/2 sin 2θ + [tex]T_{xy}[/tex] cos 2θ

[tex]T_{x'}_{y'}[/tex] = -( -324806 -0/2) sin(2 * 40°) + 0 * cos(2 * 40°)

= 159936 Pa

≈ 159.94 kPa

Therefore [tex]T_{x'}_{y'}[/tex] = 159.94 kPa.

The Question was Incomplete, Find the full content below:

A paper tube is formed by rolling a cardboard strip in a spiral and then gluing the edges together as shown. Determine the shear stress acting along the seam, which is at 40° from the vertical when the tube is subjected to an axial compressive force of 200 N. The paper is 2mm thick and the tube has an outer diameter of 100 mm.

know more about shear stress here:

https://brainly.com/question/30407832

#SPJ11

Based on the proof, the set {c1v1, c2v2} is also an orthogonal set.

It should be noted that to show that {c1v1, c2v2} is an orthogonal set, we need to show that their dot product is zero, i.e.,

(c1v1)⋅(c2v2) = 0

Expanding the dot product using the distributive property, we get:

(c1v1)⋅(c2v2) = c1c2(v1⋅v2)

Since {v1, v2} is an orthogonal set, their dot product is zero, i.e.,

v1⋅v2 = 0

Substituting this in the above equation, we get:

(c1v1)⋅(c2v2) = c1c2(v1⋅v2) = c1c2(0) = 0

Therefore, the set {c1v1, c2v2} is also an orthogonal set.

Leaen more about orthogonal on

https://brainly.com/question/30772550

#SPJ1

If the correlation between two variables in a sample is r=1, the best description of the resulting scatterplot is that the points lie perfectly on a straight line with a positive slope.

A correlation coefficient (r) measures the strength and direction of the linear relationship between two variables. When the correlation coefficient is 1,

it indicates a perfect positive linear relationship between the variables. In this case, every data point in the scatterplot falls precisely on a straight line with a positive slope.

The scatterplot represents the relationship between the two variables, with each data point plotted based on its corresponding values for the two variables.

With a correlation coefficient of 1, all the data points in the scatterplot align exactly on a straight line. This implies that as one variable increases, the other variable also increases in a consistent and proportional manner.

The scatterplot will exhibit a tight, upward-sloping pattern, where there is no variability or scatter around the line.

This indicates a strong and predictable relationship between the variables. Each point in the scatterplot will have the same x and y values, resulting in a perfect positive correlation.

To know more about linear click here

brainly.com/question/30444906

#SPJ11

The accuracy and confidence of Dawn's memory of the Challenger explosion will depend on a variety of factors, including her individual memory abilities, the emotional impact of the trauma, and other situational factors.

Firstly, it is possible that Dawn's memory of the Challenger explosion will be accurate, as the event was a significant and memorable one that received widespread media coverage. However, her level of confidence in her memory may be lower than usual due to the emotional impact of the trauma. Research has shown that emotional arousal can impair memory recall and lead to lower confidence in one's recollections.

Additionally, it is possible that Dawn may experience some form of post-traumatic amnesia (PTA) related to the Challenger explosion. PTA is a temporary memory impairment that can occur following a traumatic event, and it can affect the encoding and retrieval of new memories. However, PTA is typically short-lived and most people recover their memories relatively quickly.

Finally, it is also possible that Dawn may be very confident in her answer about the Challenger explosion, even if her memory is not completely accurate. Confidence is not always a reliable indicator of memory accuracy, and some individuals may feel more confident in their memories even if they are partially or completely incorrect.

for such more question on  accuracy

https://brainly.com/question/27881561

#SPJ11

Based on research, it is likely that Dawn will be accurate in her recollection of the Challenger space shuttle explosion, but may have low confidence in her memory due to the traumatic event. It is also possible that she may experience post-traumatic amnesia, which could affect her ability to recall details about the event.

However, if she is confident in her answer, it is likely that she has a clear memory of the event and can accurately recall what happened. It is important to note that memories can be affected by many factors, including emotions and time, so it is important to take these into account when evaluating the accuracy of a memory.
Dawn was 15 when she experienced the Challenger space shuttle explosion, which is a significant memory from her past. Research suggests that, when recalling this event, she may be accurate in her recollection but have low confidence in her answer. This could be due to the traumatic nature of the event and the passage of time, which can cause uncertainty in memory recall. Despite the possibility of post-traumatic amnesia, she might still provide a generally accurate account of the incident, but with less certainty in the details.

To learn more about Amnesia: brainly.com/question/7416546

Using the power series expansion of cos(x) to find the sum of this series. Recall that:

cos(x) = ∑[n=0, ∞] (-1)^n (x^(2n)) / (2n)!

Comparing the given series to the power series expansion of cos(x), we have:

(-1)^n 2^(2n) / (2n)! = (-1)^n 42^n (2n)! / (2n)!

Therefore, cos(x) = ∑[n=0, ∞] (-1)^n (x^(2n)) / (2n)! = ∑[n=0, ∞] (-1)^n 2^(2n) / (2n)! = ∑[n=0, ∞] (-1)^n 42^n (2n)! / (2n)!

Setting x = 4 in the power series expansion of cos(x), we get:

cos(4) = ∑[n=0, ∞] (-1)^n (4^(2n)) / (2n)! = ∑[n=0, ∞] (-1)^n 2^(2n) / (2n)!

Therefore, the sum of the given series is cos(4) / 42 = cos(4) / 1764.

Hence, the sum of the series is cos(4) / 1764.

To know more about the series refer here

https://brainly.com/question/12198123

SPJ11

The characteristic equation for the recurrence relation is (r-1)(r-4)=0. This equation has two roots:

r=1 and r=4. Therefore, the general form of the solution is an = a1(1)n + a2(4)n. Therefore, the correct answer is A.

The recurrence relation can be written as an = an-1 + 4an-2. Substituting the general form of the solution into th

is equation, we get a1(1)n + a2(4)n = a1(1)n-1 + a2(4)n-1 + 4a1(1)n-2 + 4a2(4)n-2. Dividing both sides by 4n-2, we get (a1/4)(1)n-2 + a2(1)n-2 = (a1/4)(1)n-3 + a2(4)n-3 + a1(1)n-4 + a2(4)n-4. This equation holds for all n. Therefore, equating coefficients of like terms, we get a1/4 = a1/4, a2 = 4a2, a1 = a1/4, and a2 = 4a2. Solving these equations, we get a1 = a1/4 and a2 = 4a2.

Therfore, the general form of the solution is an = a1(1)n + a2(4)n.    

To know more about series visit-

https://brainly.com/question/28163163

#SPJ11

The general form of the solutions of the recurring relation with the following characteristic equation is ( an=a1(1)n-a2(4)n.

The general form of the solutions of the recurrence relation with the characteristic equation (r-1)(r-4)=0 is a linear combination of the form an=a1(1)n+a2(4)n, where a1 and a2 are constants determined by the initial conditions of the recurrence relation.

This can be seen by factoring the characteristic equation into two linear factors: r-1=0 and r-4=0, which correspond to the two possible roots of the characteristic equation.

The solution to the recurrence relation is a linear combination of these two roots raised to the power of n, with the coefficients determined by the initial values of the sequence.

Therefore, the correct answer is A.

Know more about characteristic equation here:

https://brainly.com/question/31428714

#SPJ11

The coefficient of x^3 in the Taylor series for f(x) is 0, since there is no term involving x^3.

To find the Taylor series of the function f(x) = 1/(2x) about x = 0, we can use the formula:

[tex]f(x) = f(0) + f'(0)x + (1/2!)f''(0)x^2 + (1/3!)f'''(0)x^3 + ...[/tex]

where f'(x), f''(x), f'''(x), etc. denote the derivatives of f(x).

First, we need to find the derivatives of f(x):

f'(x) = -1/(2x^2)

f''(x) = 2/(x^3)

f'''(x) = -6/(x^4)

f''''(x) = 24/(x^5)

Next, we evaluate these derivatives at x = 0 to get:

f(0) = 1/(2(0)) = undefined

f'(0) = -1/(2(0)^2) = undefined

f''(0) = 2/(0)^3 = undefined

f'''(0) = -6/(0)^4 = undefined

f''''(0) = 24/(0)^5 = undefined

Since the derivatives are undefined at x = 0, we need to use a different method to find the Taylor series. We can use the identity:

1/(1 - t) = 1 + t + t^2 + t^3 + ...

where |t| < 1.

Substituting t = -x^2/a^2, we get:

1/(1 + x^2/a^2) = 1 - x^2/a^2 + x^4/a^4 - x^6/a^6 + ...

This is the Taylor series for 1/(1 + x^2/a^2) about x = 0. To get the Taylor series for f(x) = 1/(2x), we need to replace x with ax^2:

f(x) = 1/(2(ax^2)) = 1/(2a) * 1/(1 + x^2/a^2)

Substituting the Taylor series for 1/(1 + x^2/a^2), we get:

f(x) = 1/(2a) - x^2/(2a^3) + x^4/(2a^5) - x^6/(2a^7) + ...

Therefore, the coefficient of x^3 in the Taylor series for f(x) is 0, since there is no term involving x^3.

Learn more about Taylor series here:

https://brainly.com/question/29733106

#SPJ11

The position, s(t), of the particle at time t if initially s(0) = 3 is (2) s(t) = 10 - 7 cos(t) - 6 sin(t).

To find the position, s(t), of the particle at time t, we need to integrate the velocity function, v(t), with respect to time:

s(t) = ∫ v(t) dt

Since the velocity function is v(t) = 7 sin(t) - 6 cos(t), we have:

s(t) = ∫ (7 sin(t) - 6 cos(t)) dt

Integrating each term separately, we get:

s(t) = -7 cos(t) - 6 sin(t) + C

where C is the constant of integration.

To find the value of C, we use the initial condition s(0) = 3:

s(0) = -7 cos(0) - 6 sin(0) + C = -7 + C = 3

C = 10, and the position function is:

s(t) = -7 cos(t) - 6 sin(t) + 10

Rewriting this equation in the form of answer choices, we get:

s(t) = 10 - 7 cos(t) - 6 sin(t)

For similar questions on Position

https://brainly.com/question/28953055

#SPJ11

The position, s(t), of the particle at time t, given the initial condition s(0) = 3 and the velocity v(t) = 7sin(t) - 6cos(t), is s(t) = 9 - 7sin(t) - 6cos(t).

To find the position, we integrate the velocity function with respect to time. Integrating the velocity function v(t) = 7sin(t) - 6cos(t) gives us the position function s(t).

The indefinite integral of sin(t) is -cos(t), and the indefinite integral of cos(t) is sin(t). When integrating, we also take into account the initial condition s(0) = 3 to determine the constant term.

Integrating the velocity function, we get:

s(t) = -7cos(t) - 6sin(t) + C

To determine the constant term C, we use the initial condition s(0) = 3:

3 = -7cos(0) - 6sin(0) + C

3 = -7(1) - 6(0) + C

3 = -7 + C

C = 10

Substituting the value of C back into the position function, we obtain:

s(t) = 9 - 7sin(t) - 6cos(t)

Therefore, the position of the particle at time t, with the initial condition s(0) = 3, is given by s(t) = 9 - 7sin(t) - 6cos(t).

To learn more about integral  click here

brainly.com/question/31433890

#SPJ11

The critical values zα or z/2α are the boundary values for the rejection region(s) in hypothesis testing. The correct answer is D. 0.04, as it is the only value less than 0.05.

These values are determined based on the level of significance (α), which represents the probability of making a Type I error (rejecting a true null hypothesis).
In other words, if the calculated test statistic falls outside of the rejection region(s) defined by the critical values, we reject the null hypothesis at the given level of significance.
Therefore, for the second question, if we reject the null hypothesis at the 0.05 level of significance, we would also reject it for α values less than 0.05.

Thus, the correct answer is D. 0.04, as it is the only value less than 0.05.

Read more about critical values.

https://brainly.com/question/30168469

#SPJ11

The probability that John selected a red marble on the first draw and then selected red again on the second draw is 1/9.

To calculate the probability of John selecting a red marble and then selecting red again, we need to determine the probability of each event separately and then multiply them together.

The probability of selecting a red marble on the first draw is the number of red marbles divided by the total number of marbles:

P(Red on first draw) = 4 / (8 + 4) = 4 / 12 = 1/3

Since John replaced the marble back into the bag before the second draw, the probability of selecting a red marble on the second draw is also 1/3.

To find the probability of both events happening together (independent events), we multiply the probabilities:

P(Red on first draw and Red on second draw) = P(Red on first draw) × P(Red on second draw)

= (1/3) × (1/3)

= 1/9

Therefore, the probability that John selected a red marble on the first draw and then selected red again on the second draw is 1/9.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

The length of side a is determined as 13.92 by applying sine rule of triangle.

The length of side a is calculated by applying the following formulas shown below;

Apply sine rule as follows;

a / sin (83) = 13 / sin (68)

Simplify the expression as follows;

multiply both sides of the equation by " sin (83)".

a = ( sin (83) / sin (68) ) x 13

a = 13.92

Thus, the value of side length a is determined as 13.92 by applying sine rule as shown above.

Learn more about sine rule here: https://brainly.com/question/20839703

#SPJ1

The variance of the distribution of the data set is 0.596.

To find the variance of a discrete probability distribution, we use the formula:

Var(X) = ∑[x - E(X)]² p(x),

where E(X) is the expected value of X, which is equal to the mean of the distribution, and p(x) is the probability of X taking the value x.

We can first find the expected value of X:

E(X) = ∑x . p(x)

= 0 (0.130) + 1 (0.346) + 2 (0.346) + 3 (0.154) + 4 (0.024)

= 1.596

Next, we can calculate the variance:

Var(X) = ∑[x - E(X)]² × p(x)

= (0 - 1.54)² × 0.130 + (1 - 1.54)² ×  0.346 + (2 - 1.54)² × 0.346 + (3 - 1.54)² ×  0.154 + (4 - 1.54)² × 0.024

= 0.95592

Therefore, the variance of the distribution is 0.96.

To learn more about the variance;

https://brainly.com/question/16686665

#SPJ1

Based on the given information that AD = DC = AC = a, we can conclude that the triangle is a 30-60-90 right triangle.

To prove that the triangle is a 30-60-90 right triangle, we can use the properties of this specific triangle.

In a 30-60-90 triangle, the sides are in a specific ratio. Let's denote the length of the shortest side as "a". Then the other sides can be determined as follows:

The length of the side opposite the 30-degree angle is "a".

The length of the side opposite the 60-degree angle is "a√3".

The length of the hypotenuse (the longest side) is "2a".

Given that AD = DC = AC = a, we can conclude that the triangle is indeed a 30-60-90 right triangle.

To know more about right triangle:

https://brainly.com/question/3770177

#SPJ4

--The given question is incomplete, the complete question is given below " Prove 30 - 60 - 90 Right Triangle

using the given data from the figure, the indicated length of the sides of the triangle

AD= DC= AC= a"--

The amplitude of the function is 7, the period is π/3, and the phase shift is 0.

To find the amplitude, period, and phase shift of the function y = 7cos(6(xπ/6)), let's examine its different components:

1. Amplitude: The amplitude of a cosine function is the absolute value of its coefficient. In this case, the coefficient is 7. So, the amplitude is |7| = 7.

2. Period: The period of a cosine function is determined by dividing 2π by the absolute value of the coefficient of the angle (inside the parentheses). Here, the coefficient of the angle is 6. Therefore, the period is 2π/|6| = 2π/6 = π/3.

3. Phase Shift: The phase shift refers to the horizontal shift of the function. It is calculated by dividing the term added or subtracted inside the parentheses by the coefficient of the angle. In this case, the term inside the parentheses is (xπ/6). Since there is no term being added or subtracted, the phase shift is 0.

In summary, for the function y = 7cos(6(xπ/6)), the amplitude is 7, the period is π/3, and the phase shift is 0.

To know more about function, refer to the link below:

https://brainly.com/question/12610516#

#SPJ11

The predicted Durante humor score for an individual with an IQ score of 110 is 178.

Based on the information given, we know that there is a strong, positive, linear relationship between an individual's IQ score and their sense of humor. Additionally, the psychologist has found a correlation coefficient of 0.81 between the two variables.
To predict the Durante humor score of an individual with an IQ score of 110, we can use the formula for a simple linear regression:
y = b0 + b1x
where y is the predicted Durante humor score, x is the IQ score, b0 is the intercept, and b1 is the slope of the regression line.
To find the intercept and slope, we need to use the sample means and standard deviations provided:
b1 = r * (Sy / Sx)
where r is the correlation coefficient and Sy and Sx are the standard deviations of the Durante humor scores and IQ scores, respectively.
b0 = ybar - b1 * xbar
where ybar and xbar are the sample means of the Durante humor scores and IQ scores, respectively.
Plugging in the values, we get:
b1 = 0.81 * (24 / 12) = 1.62
b0 = 140 - 1.62 * 105 = -3.1
Now we can use these values to predict the Durante humor score of an individual with an IQ score of 110:
y = -3.1 + 1.62 * 110 = 177.9
Therefore, the predicted Durante humor score for an individual with an IQ score of 110 is 178.

learn more about Durante's humor score:https://brainly.com/question/4420048

#SPJ11

The correct probability density function (PDF) for the uniform distribution defined over the interval from 25 to 40 is:

f(x) = 1/15 for 25 ≤ x ≤ 40

f(x) = 0 elsewhere

This means that the PDF is constant over the interval from 25 to 40, and is zero everywhere else.

The other PDFs provided are incorrect:

f(x) = 1/40 for all x would not be a uniform distribution over the interval from 25 to 40, since the PDF would be the same for values outside of the interval.

f(x) = 5/8 for 25 < x < 40 and f(x) = 0 elsewhere is not a valid PDF, since the total area under the curve must equal 1.

f(x) = 1/25 for 0 < x < 25 and f(x) = 0 elsewhere is not a uniform distribution over the interval from 25 to 40,

since it only assigns non-zero probability density to values in the interval from 0 to 25.

To know more about probability refer here:

https://brainly.com/question/30034780

#SPJ11

A force of -14j N is applied to a particle located at the position vector r⃗ = (8i^ + 5j^) m.

The given information states that a force vector F⃗ is exerted on a particle. The force vector is represented as F⃗ = -14j^ N, where -14 indicates the magnitude of the force and j^ represents the unit vector along the y-axis. Additionally, the particle is located at the position vector r⃗ = (8i^ + 5j^) m, where 8i^ represents the position along the x-axis and 5j^ represents the position along the y-axis.

The negative sign in the force vector indicates that the force is directed opposite to the y-axis, which means it is acting downward. The magnitude of the force is 14 N. The position vector indicates that the particle is located at the position (8, 5) in terms of Cartesian coordinates. The i^ and j^ components represent the x and y directions, respectively. Combining these pieces of information, we can conclude that a force of -14 N is applied in the downward direction to a particle located at the coordinates (8, 5) in the x-y plane.

Learn more about y-axis here: https://brainly.com/question/30901684

#SPJ11