Which of the following correctly lists the five atoms in order of increasing size (smallest to
largest)?
O, F, Mg, S, Ba

Answer:

4. Water from upland areas often carries sediment and pollutants. The marshy land and plants in estuaries filter these pollutants out of the water. The plants in estuaries help prevent shoreline erosion. Estuaries also protect inland areas from flooding and storm surges.

5. Dredging impacts marine organisms negatively through entrainment, habitat degradation, noise, remobilization of contaminants, sedimentation, and increases in suspended sediment concentrations.

Explanation:

The farther you go in to the ocean, the more salinity it contains. The closer you are to freshwater, the less salinity it contains. This can happen in estuaries, and estuaries are almost like brackish waters.

Hope this helps you!

Answer:

1 Faraday

Explanation:

This question seeks to test proper understanding of Faraday's second law of electrolysis which states when the same quantity electricity passes through a solution of different electrolytes, the mass of the substance deposited is directly proportional to there chemical equivalence.

This law hints at the charges of ions being the chemical equivalence and also been represented as the unit for the quantity of electricity in faraday, F. Hence, a metal with the charge of 1+ can be displaced by 1F (which is equal to 96, 500 coloumbs). This charge also represents one molecule of electron, thus 1 faraday corresponds to one mole of electrons.

NOTE: It should be noted that a metal with the charge of 2+ can be displaced by 2F and so on.

Answer:

1.45g of FeCl3

Explanation:

The equation of the reaction is given as;

2Fe + 3Cl2 --> 2FeCl3

2 mol of Fe reracts with 3 mol of Cl2 to form 2 mol of FeCl3

Upon converting to mass using;

Mass = Number of moles * Molar mass

( 2 * 55.85 = 111.7g ) of Fe reacts with ( 3 * 71 = 213g ) of Cl2 to form ( 2 * 162.2 = 324.4g) of FeCl3

Cl2 is the limiting reactant as it determines how much of FeCl3 is formed

213g of Cl2 = 324.4g of FeCl3

0.950g of Cl2 = x

x = (0.950 * 324.4 ) / 213

x = 1.45g of FeCl3

Answer:

0.013 mol/L

Explanation:

Molarity, which is molar concentration or moles per unit volume, can be calculated using the formula:

M = n/V

Where; M = Molar concentration of solution

n = number of moles of solute

V = Volume of solvent

n = 0.0025 moles of sugar

V = 200.00mL of solution

Since 0.001L = 1mL

200mL = 0.200L

Therefore, M = n/V

M = 0.0025/0.200

M = 0.0125 mol/L

Round up to the nearest thousandth ~ 0.013mol/L

Answer:

true

Explanation:

I'm not sure why cause I dont know how to explain but it's TRUE

Answer:

True  

Explanation:

The particles moving faster in a substance the hotter it gets.

Answer:

2H₂ + O₂       →     2H₂O

Explanation:

Chemical equation:

H₂ + O₂       →     H₂O

Balance chemical equation:

2H₂ + O₂       →     2H₂O

Step 1:

H₂ + O₂       →     H₂O

Left hand side                     Right hand side

H = 2                                    H = 2

O = 2                                    O = 1

Step 2:

H₂ + O₂       →     2H₂O

Left hand side                     Right hand side

H = 2                                    H = 4

O = 2                                    O = 2

Step 3:

2H₂ + O₂       →     2H₂O

Left hand side                     Right hand side

H = 4                                    H = 4

O = 2                                    O = 2

Answer:

seafloor spreading

Explanation:

i took the test

Answer:

Explanation:

The percentage error of a certain measurement can be found by using the formula

[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]

From the question

actual density = 2.49g/mL

error = 2.49 - 1.47 = 1.02

We have

[tex]p(\%) = \frac{1.02}{2.49} \times 100 \\ = 40.96385542...[/tex]

We have the final answer as

Hope this helps you

Answer:

The answer to this question is 33.8

Answer:

0.17 s⁻¹

Explanation:

Step 1: Given data

Step 2: Calculate the frequency factor

We will use the Arrhenius equation.

ln k = lnA - (Ea/R).(1/T)

lnA = ln k + (Ea/R).(1/T)

lnA = ln 1.0 × 10⁻²² s⁻¹ + [(111 kJ/mol)/(8.314 × 10⁻³ kJ/mol.K)].(1/273K)

A = 0.17 s⁻¹

Answer:

Most common has the same or closest mass because it is closer to the original’s mass.

Explanation:

I got it from the answer key

Read more here:

https://brainly.com/question/1598931

Answer:

-74.6 kj/mol

Explanation:

you can see the answer at the pic

Answer:

[tex]m_{O_2}=467gO_2[/tex]

Explanation:

Hello.

In this case, for the reaction:

[tex]2H_2+O_2\rightarrow 2H_2O[/tex]

The correct way to compute the oxygen that reacted is by considering the mass of hydrogen, 58.9 g, its molar mass, 2.02 g/mol, the 2:1 mole ratio between hydrogen and oxygen and the atomic mass of that gaseous oxygen 32.00 g/mol; therefore we use the following stoichiometric procedure:

[tex]m_{O_2}=58.9gH_2*\frac{1molH_2}{2.02gH_2}*\frac{1molO_2}{2molH_2} *\frac{32.00gO_2}{1molO_2} \\\\m_{O_2}=467gO_2[/tex]

The same result could have been obtained by using the mass of water since the law of conservation of mass is obeyed here.

Best regards!

Answer:

1) No

2) The solvent contaminated the analyte

3) The solvent should be evaporated properly before washing and drying the analyte

Explanation:

During separation of organic compounds, solvents are used. These solvents are able to contaminate the analyte and lead to a large difference in melting point of solids obtained.

However, the error can be minimized by evaporating the solvent before washing, drying and melting point determination of the solid.

Answer:

wood

Explanation:

i can take the seds from the trees to row new trees and still use the wood without causing deforestation

Answer:

k Nishant

Explanation:

i don't know sorry but u can search in google

Answer:

3.65 mol O₂

Explanation:

Step 1: RxN

2H₂O₂ → 2H₂O + O₂

Step 2: Define

Given - 7.30 mol H₂O₂

Solve - x mol O₂

Step 3: Stoichiometry

[tex]7.30 \hspace{3} mol \hspace{3} H_2O_2(\frac{1 \hspace{3} mol \hspace{3} O_2}{2 \hspace{3} mol \hspace{3} H_2O_2} )[/tex] = 3.65 mol O₂

Se producirán 36 gramos de agua

Explicación: Ya que en una reacción química no puede descubrir ningún cambio en masa total de las sustancias que en ella intervienen, pues en una reacción química ni se gana ni se pierde masa.  

Answer:

a. E-H-Y

Explanation:

A group of three nucleotides is called a codon that codes for a specific amino acid in the protein. There are 20 essential amino acids present in human body and are required in the diet.

Each amino acid is given a one-letter code that makes the study of amino acid sequences easy. One letter code for the given amino acid sequence Glutamic Acid-Histidine-Tyrosine is E-H-Y in which E is code for Glutamic Acid, H is a code for Histidine, and Y is a code for Tyrosine.

Hence, the correct answer is "a. E-H-Y".

Answer:

Chemical symbols refer to chemical elements only. They do not necessarily refer to atoms of that element, but also to ions.

Explanation:

Answer:

a. is the correct answer

Explanation:

Answer:

Eukaryotic (a plant cell)

Explanation:

The presence of a chloroplast indicates that the cell has membrane-bound organelles. This is not a feature of prokaryotic cells - only eukaryotic cells. Therefore, the cell is eukaryotic. The presence of a large vacuole, chloroplast, and rigid cell wall suggests its a plant cell as plant cells are the only eukaryotes with these features.

Answer:

6.054×10²⁵

Explanation:

1)find number of moles of zinc

2)multiply the mole of zinc with 2

3)use the formula mol = number of particle/ avogadro constant

Total, 97.64 moles of hydrochloric acid (HCl) must have reacted.

To determine the number of moles of hydrochloric acid (HCl) that reacted, we first need to find the molar ratio between zinc (Zn) and hydrochloric acid (HCl) from the balanced chemical equation:

Zn(s) + 2 HCl(aq) → ZnCl₂(aq) + H₂(g)

From the equation, we see that 1 mole of Zn will reacts with 2 moles of HCl.

Given that 29.39 × 10²⁴ atoms of zinc reacted, we need to convert this quantity to moles. We can do this by using Avogadro's number:

1 mole of any substance = 6.022 × 10²³ atoms

Number of moles of zinc reacted = (29.39 × 10²⁴ atoms) / (6.022 × 10²³ atoms/mol)

Number of moles of zinc reacted ≈ 48.82 moles (rounded to 3 significant figures)

Now, using the molar ratio from the balanced equation, we can determine the number of moles of hydrochloric acid (HCl) that reacted:

Number of moles of HCl reacted = 2 × Number of moles of zinc reacted

Number of moles of HCl reacted ≈ 2 × 48.82 moles

≈ 97.64 moles

Therefore, approximately 97.64 moles of hydrochloric acid (HCl) must have reacted.

To know more about hydrochloric acid here

https://brainly.com/question/14519330

#SPJ2

Answer:

costal erosion

Explanation:

can cause erosion

Answer:

The water piles up with nowhere to go but onto land when it gets to the coast. The rising water, called storm surge, can submerge low-lying areas and towns along the coast. Combined with the crashing waves of the storm, the storm surge can cause demolishing docks, houses, roads, and erode beaches.

Explanation:

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\ [/tex]

From the question we have

[tex]volume = \frac{12}{2.7} \\ = 4.4444444....[/tex]

We have the final answer as

Hope this helps you

Explanation:

Valves

Blood capillaries

Answer:

C6H1206

Explanation:

C6H12O6 is a monomer of carbohydrates also known as glucose, so it is not an electrolyte at all.

Answer:

[tex]Kc=\frac{[SF_6]^8}{[F_2]^2^4}[/tex]

Explanation:

Hello.

In this case, for the undergoing chemical reaction:

[tex]S_8(s) + 24F_2(g) \rightleftharpoons 8SF_6(g)[/tex]

We consider the law of mass action in order to write the equilibrium expression yet we do not include S8 as it is solid and make sure we power each gaseous species to its corresponding stoichiometric coeffient (24 for F2 and 8 for SF6), thus we obtain:

[tex]Kc=\frac{[SF_6]^8}{[F_2]^2^4}[/tex]

Best regards!