The process in question is referred to as the iterative design process. Engineers utilize this method by completing and repeating a sequence of steps in order to continually improve and refine their designs as they work towards achieving the project goal. This approach allows for flexibility and adaptability in the design process, as engineers can make adjustments and modifications based on feedback and testing, ultimately leading to a more successful outcome.
In the normal sequence of construction, main stairways are built or installed after interior wall surfaces are complete and finished flooring or ____ has been laid
Main stairways are built or installed after interior wall surfaces are complete and finished flooring or subflooring has been laid.
Main stairways are typically constructed or installed in the later stages of construction to avoid damage or obstruction during the installation of interior wall surfaces and flooring. By completing these tasks first, the main stairways can be seamlessly integrated into the overall design of the building, ensuring proper alignment and functionality. This sequence also allows for easier access and maneuverability for workers and materials during the earlier phases of construction.
To know more about stairways click the link below:
brainly.com/question/32465214
#SPJ11
In the normal sequence of construction, main stairways are built or installed after interior wall surfaces are complete and finished flooring or subflooring has been laid.
Main stairways are typically installed in a building once the interior wall surfaces are complete. This ensures that the walls surrounding the stairway are in their final finished state before the installation begins. Additionally, the finished flooring or subflooring is laid before the stairway installation to provide a stable and level surface for the stairs to be built upon.By following this sequence, the construction process can proceed smoothly, allowing the walls to be finished without obstruction and ensuring the stairway is properly integrated into the completed interior space. It also helps to avoid potential damage or disruption to the stairway during the wall finishing process.
To learn more about installed click on the link below:
brainly.com/question/32465214
#SPJ11
.A channel through which data flows between a program and storage is a ________________________.
a. path
b. folder
c. directory
d. stream
The correct answer is d. stream.
A stream is a channel through which data flows between a program and storage. It is a sequence of bytes that represent a continuous flow of data between the program and the storage device. Streams can be used to read and write data to files, network connections, and other sources of input and output. They are an essential part of modern programming languages and are used extensively in applications that handle large amounts of data. In summary, a stream provides a way for a program to read and write data to and from storage, making it an essential component of many software applications.
To know more about stream visit:
https://brainly.com/question/31779773
#SPJ11
fill in the blank. ____ is an organizing principle that focuses your attention on the degree to which media messages are both real and fantasy.
Attention Distinction is an organizing principle that focuses your attention on the degree to which media messages are both real and fantasy.
What is the organizing principle that directs attention to the reality and fantasy in media messages?Attention Distinction is an essential concept in media literacy that helps individuals navigate the complex landscape of media messages. In today's digital age, where information and entertainment are readily available through various platforms, it becomes crucial to discern the boundaries between reality and fantasy. Attention Distinction acts as an organizing principle that guides our focus, enabling us to critically evaluate the authenticity and fictional elements present in media content.
At its core, Attention Distinction prompts us to question the nature of the media messages we encounter. It encourages us to consider whether the information we receive is factual or embellished, whether the stories we witness are real or scripted, and whether the images we see are authentic or manipulated. By developing this awareness, we become more discerning consumers of media, able to differentiate between truthful representations and imaginative constructs.
Learn more about Media literacy
brainly.com/question/30144593
#SPJ11
For vapor-liquid equilibrium at low pressure (so the vapor phase is an ideal gas) a. What is the bubble point pressure of an equimo- lar ideal liquid binary mixture? b. What is the bubble point vapor composition of an equimolar ideal liquid binary mixture? c. What is the bubble point pressure of an equimo- lar liquid binary mixture if the liquid mixture is nonideal and described by G* = AX X2? d. What is the bubble point vapor composition of an equimolar liquid binary mixture if the liq- uid mixture is nonideal and described by G" = AxLx??
For vapor-liquid equilibrium at low pressure (so the vapor phase is an ideal gas): a. The bubble point pressure of an equimolar ideal liquid binary mixture can be calculated using Raoult's law, which states that the vapor pressure of a component in a mixture is proportional to its mole fraction in the liquid phase.
Therefore, the total vapor pressure of the mixture is the sum of the partial pressures of each component. Since the mixture is equimolar, each component has a mole fraction of 0.5 in the liquid phase. Thus, the bubble point pressure is equal to the vapor pressure of each component at its mole fraction of 0.5.
b. The bubble point vapor composition of an equimolar ideal liquid binary mixture is also equal to the mole fraction of each component in the liquid phase, which is 0.5 for each component.
c. If the liquid mixture is nonideal and described by G* = AX X2, then the bubble point pressure cannot be calculated using Raoult's law since the activity coefficients are not equal to 1. Instead, one can use an activity coefficient model such as the Wilson or NRTL model to calculate the activity coefficients and then use them in the bubble point equation to determine the bubble point pressure.
d. Similarly, if the liquid mixture is nonideal and described by G" = AxLx, the bubble point vapor composition cannot be calculated using Raoult's law. Instead, one can use an activity coefficient model to calculate the activity coefficients and then use them in the bubble point equation to determine the bubble point vapor composition.
To know about equilibrium visit:
https://brainly.com/question/30255848
#SPJ11
Which of the following statement is false.
A.Companies expose themselves to harsh sanctions by federal agencies when they violate the privacy policies that their customers rely upon.
B.Several researchers estimate that distraction costs hundreds of billions of dollars a year in lost productivity
C.Many people live and work in a state of continuous partial attention as they move through their day—loosely connected to friends and family through various apps on mobile and wearable devices
D.Discrimination is prejudicial treatment that tends to be easy to prove
The false statement among the given options is D: Discrimination is prejudicial treatment that tends to be easy to prove.
Companies do expose themselves to harsh sanctions by federal agencies when they violate the privacy policies that their customers rely upon. This is true because privacy policies are legally binding agreements and violating them can lead to fines and penalties. Several researchers estimate that distraction costs hundreds of billions of dollars a year in lost productivity. This is true as distractions from technology, multitasking, or other factors can lead to decreased productivity and inefficiencies in the workplace.
Many people live and work in a state of continuous partial attention as they move through their day—loosely connected to friends and family through various apps on mobile and wearable devices. This is also true, as the modern lifestyle often involves constantly switching between different tasks and maintaining connections through various digital platforms.
To know more about Discrimination visit:-
https://brainly.com/question/17217157
#SPJ11
.1. Use a SET statement to temporarily disable the general log. Then, to make sure that this variable was set, use a SELECT statement to view the variable.
2. Page BreakUse a SELECT statement to view the system variables that enable and disable the binary log and the error log.
3. Open the general log in a text editor and note that it includes the SELECT statement you executed( I JUST CURIES HOW TO OPEN THE GENERAL LOG IN TEXT EDITOR)
To open the general log in a text editor, you can follow the attached steps.
Log in to your MySQL server as a user with administrative privilegesType the following command to disable the general log temporarilySET global general_log = 'OFF';
Use the following command to open the general log file in a text editor
sudo nano /var/log /my sql /mysql.log
Note that the path may be different depending on your system configuration.
Use the arrow keys to navigate through the log file and locate the SELECT statement you executed.
Once you have finished reviewing the log, you can use the following command to re-enable the genera log
SET global general_log = ' ON';
Finally, you can use a SELECT statement to view the system variables that enable and disable the binary log and the error log
What is General Log in Programming?In a computer context, a log is an automatically generated and time-stamped document of events associated with a particular system. Almost all software applications and systems generate log files.
The computer has the following types of log files:
Availability Log: Track system performance, uptime, and availability. Resource Log: Provides information about connection problems and capacity limitations.
Threat Log: Contains information about system, file, or application traffic that matches a predefined firewall security profile.
Learn more about text editor:
https://brainly.com/question/31431600
#SPJ1
There are six main parts of a building water supply system. They are as follows:-
1. Building Supply: It is the water supply pipe line that connects the district or city water supply system to the building.
2. Water Meter: A water meter is the device which measures and records the amount of water consumed which is required for water tax purposes.
3. Building Main: The building main is the water pipeline which carries the water from water meter to the various risers located throughout the building.
4. Riser: A riser is a water supply pipe that extends vertically up from the building main pipeline and carries water to fixture branches.
5. Fixture Branch: A fixture branch is a water supply pipe that connects the riser pipeline to the fixtures connections. Fixture branch pipes supply water to the individual plumbing fixtures connections.
6. Fixture Connection: A fixture connection runs from the fixture branch to the fixture, which is the terminal point of use in a plumbing system. A shut-off valve is located in the hot and cold water supply at the fixture connection.
A building water supply system is essential to ensure that clean and safe water is available to all the plumbing fixtures in a building. The system comprises of six main parts that work together to supply water throughout the building. The first part of the system is the building supply, which is the pipeline that connects the building to the city or district water supply system.
It is important to ensure that this connection is secure and meets all the necessary codes and regulations. The water meter is the second part of the system, and it is used to measure and record the amount of water consumed. This helps in determining water tax purposes and can also help to identify leaks or wastage. The building main is the third part of the system and carries water from the water meter to the various risers located throughout the building. The risers are vertical pipes that extend from the building main and carry water to fixture branches. Fixture branches are the pipes that connect the riser pipeline to the fixtures connections. Finally, fixture connections run from the fixture branch to the fixture, which is the terminal point of use in a plumbing system. A shut-off valve is located in the hot and cold water supply at the fixture connection to allow for easy maintenance and repairs. In summary, all six parts of a building water supply system work together to ensure that clean and safe water is available to all plumbing fixtures throughout the building. It is important to regularly maintain and inspect these parts to ensure the continued efficient functioning of the system.
Learn more about building here
https://brainly.com/question/24331380
#SPJ11
Estimate the concentration of CO at the downwind edge of a city. The city may be considered to function as three parallel strips, located perpendicular to the wind. For all of the strips, the wind is measured at 10 m height using an anemometer. The wind speed is 3 m/s. Use the wind speed at one half the mixing depth
The concentration of CO at the downwind edge of a city can vary widely depending on the factors discussed above.
To estimate the concentration of CO at the downwind edge of a city, one needs to understand that pollution comes from various sources like industrial facilities, power plants, and vehicles.
One effective way of quantifying air pollution concentrations in the air is through atmospheric dispersion modeling.
Atmospheric dispersion modeling helps in predicting the concentration of pollutants emitted from point sources (stacks), area sources (spray paint booths), or mobile sources (cars) in a particular area. This modeling is based on many factors such as weather conditions, emission rates, and source characteristics.
In estimating the concentration of CO at the downwind edge of a city, one can consider the city to function as three parallel strips located perpendicular to the wind. For all of the strips, the wind is measured at 10 m height using an anemometer. The wind speed is 3 m/s. We can use the wind speed at one-half the mixing depth.To estimate the concentration of CO at the downwind edge of the city, we need to use the Gaussian Plume Model, which is widely used to estimate the air quality impact of stationary sources.The concentration of CO at the downwind edge of the city can be estimated using the formula given below:
C = Q/(2*pi*u*y*σ)*e(-0.5*r^2/σ^2)
Where C = concentration (mg/m3)Q = emission rate (g/s)u = wind speed at one-half of mixing height (m/s)y = distance downwind from the source (m)r = distance perpendicular to the wind direction (m)σ = standard deviation of plume distribution in crosswind direction (m)
The concentration of CO at the downwind edge of a city can vary widely depending on the factors discussed above.
Learn more about pollution :
https://brainly.com/question/23857736
#SPJ11
3) For z=magic (6). Perform the following operations to z in the order given: i. Divide column 6 by V1.5. ii. Add the elements of the fifth row to the elements in the second row (the fifth row remains unchanged). iii. Multiply the elements of the second column by the corresponding elements of the third column and place the result in the second column (the third column remains unchanged).
To perform the given operations on the matrix z=magic(6), we can use MATLAB or any other programming language that supports matrix operations.
The steps are as follows:
i. To divide column 6 by V1.5, we can use the following code:
[tex]z(:,6) = z(:,6)/\sqrt(1.5);[/tex]
This code divides each element in the 6th column of z by the square root of 1.5.
ii. To add the elements of the fifth row to the elements in the second row, we can use the following code:
[tex]z(2,:) = z(2,:) + z(5,:);[/tex]
This code adds each element in the 5th row of z to the corresponding element in the 2nd row of z.
iii. Multiply the elements of the second column by the corresponding elements of the third column and place the result in the second column, we can use the following code:
[tex]z(:,2) = z(:,2).*z(:,3);[/tex]
This code multiplies each element in the 2nd column of z by the corresponding element in the 3rd column of z.
So, the resulting matrix z will be adjusted after carrying out all three procedures in the specified order.
For more such questions on MATLAB:
https://brainly.com/question/29911009
#SPJ11
Starting with z=magic(6), we will perform the following operations in order:
i. Divide column 6 by V1.5. This means we will divide each element in the 6th column of the matrix z by the square root of 1.5. The result will be a new matrix where the 6th column is divided by V1.5 and the other columns remain unchanged.
ii. Add the elements of the fifth row to the elements in the second row (the fifth row remains unchanged). This means we will add each element in the 2nd row of the matrix z to the corresponding element in the 5th row. The result will be a new matrix where the 2nd row has been changed by adding the 5th row, and the other rows remain unchanged.
iii. Multiply the elements of the second column by the corresponding elements of the third column and place the result in the second column (the third column remains unchanged). This means we will multiply each element in the 2nd column of the matrix z by the corresponding element in the 3rd column, and place the result in the 2nd column. The result will be a new matrix where the 2nd column has been changed by multiplying it with the 3rd column, and the other columns remain unchanged.
Overall, the matrix z will have undergone these three operations, resulting in a new matrix where the 6th column has been divided by V1.5, the 2nd row has been changed by adding the 5th row, and the 2nd column has been changed by multiplying it with the 3rd column. The other rows and columns remain unchanged.
learn more about https://brainly.in/question/33709709
#SPJ11
The state of stress at a point on a body is given by the following stress components: 0 = 15 MPa, Oy = -22 MPa and Try = 9 MPa Matlab input: sx = -7; sy = -20; txy = -16; 1) Determine the principal stresses 01 and 02.
The principal stresses are 01 = 6.497 MPa (tensile) and 02 = -33.497 MPa (compressive).
To determine the principal stresses 01 and 02, we need to use the stress transformation equations. These equations relate the stress components in one coordinate system to those in another coordinate system rotated at an angle θ with respect to the original one.
Using the stress transformation equations, we can derive the following quadratic equation:
(σ- sx)(σ- sy) - txy^2 = 0
where σ is the normal stress along the principal planes and txy is the shear stress on these planes. Solving this equation for σ, we get:
σ1,2 = (sx + sy)/2 ± √[(sx - sy)^2/4 + txy^2]
Substituting the given values, we obtain:
σ1 = 6.497 MPa and σ2 = -33.497 MPa
To know more about principal stresses visit:
https://brainly.com/question/14418799
#SPJ11
construct a cfg which accepts: l = { 0^n1^n | n >= 1} u { 0^n1^2n | n >=1 } (i.e. strings of (0 1)* where it starts with n zeros followed by either n or 2*n ones.)
To construct a CFG that accepts l = { 0^n1^n | n >= 1} u { 0^n1^2n | n >=1 }, we can use the following rules:
S -> 0S11 | 0S111 | T
T -> 0T11 | 0T111 | epsilon
The start symbol S generates strings that start with 0^n and end with either n or 2n ones. The variable T generates strings that start with 0^n and end with n ones. The rules allow for the production of any number of 0s, followed by either n or 2n ones. The first two rules generate the first part of the union, and the last rule generates the second part of the union. The CFG is valid for all n greater than or equal to 1. This CFG accepts all strings in the language l.
To construct a context-free grammar (CFG) that accepts the language L = {0^n1^n | n >= 1} ∪ {0^n1^2n | n >= 1}, you can define the CFG as follows:
1. Variables: S, A, B
2. Terminal symbols: 0, 1
3. Start symbol: S
4. Production rules:
S → AB
A → 0A1 | ε
B → 1B | ε
The CFG accepts strings starting with n zeros followed by either n or 2*n ones. The A variable generates strings of the form 0^n1^n, while the B variable generates additional 1's if needed for the 0^n1^2n case.
To know more about Strings visit-
https://brainly.com/question/30099412
#SPJ11
can every cfl (without epsilon) be generated by a cfg which only has productions of the form a -> bcd or a -> a (with no epsilon productions)? explain why or why not.
The capability of CFGs to generate a wide variety of Languages is achieved by allowing various types of productions to be included in their rules.
Every context-free language (CFL) can be generated by a context-free grammar (CFG). However, not every CFL without epsilon can be generated by a CFG with only productions of the form A -> BCD or A -> a (with no epsilon productions). The main reason is that some languages may require a different form of productions to generate all possible strings.One key aspect of CFGs is that they can produce languages with an arbitrary degree of nesting, which allows them to capture the structure of a language effectively. However, limiting the grammar to only specific production forms like A -> BCD or A -> a might be too restrictive in some cases. For instance, a language with odd-length strings can't be generated by such a grammar, as the productions don't allow creating an odd number of terminal symbols.So, while it is possible for some CFLs to be generated by a CFG with only those production forms, it's not universally true for every CFL without epsilon. The capability of CFGs to generate a wide variety of languages is achieved by allowing various types of productions to be included in their rules.
To know more about Languages .
https://brainly.com/question/16936315
#SPJ11
No, not every CFL without epsilon can be generated by a CFG which only has productions of the form a -> bcd or a -> a (with no epsilon productions). This is because there are some CFLs that require epsilon productions in order to generate all possible strings in the language. Epsilon productions are productions that have an empty string on the right-hand side, and they allow the CFG to generate the empty string. Without epsilon productions, the CFG would not be able to generate any strings with zero symbols.
For example, consider the language L = {a^n b^n | n ≥ 0}. This language is a CFL without epsilon, but it cannot be generated by a CFG which only has productions of the form a -> bcd or a -> a (with no epsilon productions). This is because the only way to generate the empty string is by using an epsilon production, and without epsilon productions, the CFG would not be able to generate any strings with zero symbols. Therefore, we need epsilon productions in order to generate all possible strings in this language.
In summary, not every CFL without epsilon can be generated by a CFG which only has productions of the form a -> bcd or a -> a (with no epsilon productions), as some languages require epsilon productions in order to generate all possible strings in the language.
LEARN MORE ABOUT EPSILON HERE
https://brainly.com/question/14783337
#SPJ11
A simple ideal Rankine cycle operates between the pressure limits of 20 kPa and 3 MPa, with a turbine inlet temperature of 500?C. Disregarding the pump work, Find the cycle efficiency.
The Rankine cycle is a thermodynamic cycle used in power plants to generate electricity. It is a simple cycle that consists of four components, a boiler, a turbine, a condenser, and a pump. The cycle operates between two pressure limits, the high-pressure limit, and the low-pressure limit.
The cycle efficiency is a measure of the amount of work produced by the cycle compared to the amount of energy supplied to the cycle. In this case, the Rankine cycle operates between the pressure limits of 20 kPa and 3 MPa, with a turbine inlet temperature of 500?C. Disregarding the pump work, we can use the Carnot cycle efficiency formula to find the cycle efficiency. The Carnot cycle efficiency is the maximum possible efficiency of any heat engine operating between two temperatures, and it is given by the formula:
Efficiency = (1 - Tlow/Thigh) * 100% Where Tlow is the absolute temperature of the low-pressure limit, and Thigh is the absolute temperature of the high-pressure limit. In this case, the low-pressure limit is 20 kPa, which is 0.02 MPa, and the high-pressure limit is 3 MPa. We can convert the turbine inlet temperature of 500?C to absolute temperature by adding 273.15, which gives us 773.15 K. So, Tlow = 293.15 K and Thigh = 773.15 K. Substituting these values into the efficiency formula gives us: Efficiency = (1 - 293.15/773.15) * 100% Efficiency = 62.11% Therefore, the cycle efficiency is approximately 62.11%. This means that for every 100 units of energy supplied to the cycle, 62.11 units are converted into useful work.
Learn more about thermodynamic cycle here-
https://brainly.com/question/31413995
#SPJ11
HDFS files share an important property with database journal files. What is this property?
A Replicated for security
B Controlled by locks
C Optimized for sequential reads.
D Append-only
The important property that HDFS files share with database journal files is D: Append-only. Both are designed to efficiently handle data by only allowing appending of new information, which enhances performance and data consistency.
The property that HDFS files share with database journal files is that they are optimized for sequential reads. This means that data is stored in a way that allows for efficient retrieval of large amounts of data in a linear, sequential fashion.
This is important for both HDFS and database journal files because they often deal with large amounts of data that need to be processed quickly and efficiently. The answer is C, "Optimized for sequential reads". I hope this helps!
To know more about database visit :-
https://brainly.com/question/30634903
#SPJ11
Spherical ball bearings of 1/2-inch diameter (McMaster p/n 34665K32) are dumped into a 55-gallon drum (McMaster p/n 4115T68) of water in order to cool quickly after heat treating. The bearings are initially at 800° C and are made from 2017-T4 Aluminum. The properties of the aluminum may be considered independent of temperature. The water is initially at 20° C. The properties of water are assumed to be constant with temperature. The outside of the container is insulated, so no heat is lost from the water to the surroundings during the process. However, the volume of water is sufficiently small that the water itself changes temperature substantially during the cooling process. The heat transfer coefficient between the surface of the parts and the water is 350 W/m²-K. a.) Using only approved websites listed on the cover of this exam) or your textbook, deter- mine the density, specific heat and any other relevant properties of 2017-T4 aluminum and water necessary to anlayze this problem. b.) Evaluate whether a single ball bearing can be treated with a lumped capacitance approximation. c.) Assume both the water and the bearings can be treated as lumped capacitances. Derive two ordinary differential equations that describe the temperature of the bearings, To, and the temperature of the water, Tc. d.) Prepare the two equations for further analysis by putting them in the form dᎢ = a(T-T) dt where a is a suitable constant. e.) Subtract the two ODEs that you derived above from each other to develop a single ODE that can be expressed in terms of the temperature difference, 8 = T. – T. f.) Solve the new ODE just derived in order to obtain an expression for 8 as a function of time, t. g.) Substitute the result back into the original ODEs and solve in order to develop expres- sions for T, and To as functions of time. h.) Plot T, and T. vs. time on a single plot if 100 bearings are submerged in the drum. i.) Based on your plot, how much time will elapse before a state of equilibrium is reached and what is the equilibrium temerpature? How would this change if the 55-gallon drum were not insulated? j.) Prepare a single plot that shows To and T. vs. time where the number of bearings submerged in the drum is a parameter that varies between 1000 and 100,000. k.) If the bearings must be cooled to 40°C, is there a limit to the number of bearings that can be submerged in the drum? How many is this?
The problem involves cooling spherical ball bearings made of 2017-T4 Aluminum in a drum of water, and the solution requires determining properties, analyzing approximations, deriving ODEs.
What is the problem described in the given paragraph and what are the required steps to solve it?
The given paragraph describes a scenario where spherical ball bearings made of 2017-T4 Aluminum are cooled in a 55-gallon drum of water.
The properties of both the aluminum and water are provided, and the heat transfer coefficient between the parts and water is given.
The problem requires determining the density, specific heat, and other relevant properties of aluminum and water, analyzing if the lumped capacitance approximation is suitable for a single ball bearing, deriving ordinary differential equations (ODEs) for the temperature of the bearings and water, solving the ODEs to obtain expressions for temperature as a function of time, plotting temperature vs.
time for 100 bearings, determining the equilibrium state and time, and creating a plot that shows temperature vs. time for varying numbers of submerged bearings.
Finally, it asks if there is a limit to the number of bearings that can be submerged to achieve a specific temperature.
Learn more about spherical ball bearings
brainly.com/question/28107131
#SPJ11
The Vending Bank
Design a class which models the coin-operated "bank" part of a Vending machine which sells snacks. You do not need to implement this class. You only need express the design using a simple UML diagram. Include the diagram in a file (.doc, .docx, or .pdf) in your .zip submission that you turn into Canvas. Here is a start of VendingBank UML diagram with one function already defined.
VendingBank
VendingBank
__id: int
Fill in other data fields
VendingBank(id: int)
getVendingBankId(): int
Fill in other methods required...
TimeSpan
Design and implement a TimeSpan class which represents a duration of time in seconds, minutes and hours. The order seconds, minutes, and hours should be respected in the constructor.
As an example
duration = TimeSpan(3, 2, 1);
is a duration of time of 1 hour, 2 minutes, and 3 seconds.
You should store the values as integers in a normalized way but they may be passed in as floats. The stored number of seconds should be between -60 and 60; the stored number of minutes should be between -60 and 60. However, durations can be created with input arguments outside these ranges and you should normalize these. You do not need to worry about integer overflow for very big TimeSpans.
As another example
duration = TimeSpan(90, 2, 1);
is stored as a duration of time of 1 hour, 3 minutes and 30 seconds.
Accessor functions required
The TimeSpan class should implement the following getters/setters:
def getHours(): return the number of hours as an int
def getMinutes(): return the number of minutes as an int
def getSeconds(): return the number of Seconds as an int
def setTime(seconds, minutes, hours): set the number of hours, minutes, seconds
Constructor
The class should define the constructor so that it can receive both floats and ints.
However, the class stores the data as integers so rounding is required.
TimeSpan(-10, 4, 1.5) represents 1 hour, 33 minutes, 50 seconds.
If only one parameter is passed during initialization assume it is a second. If there are two assume seconds and minutes (in that order).
TimeSpan(3, 67) represents 1 hour, 7 minutes, 3 seconds.
Operators
The class must overload and implement the following math operators: addition, subtraction, and Unary Negation. The class must make sure that += and -= assignment statements as well.
The class must overload and implement the full set of equivalence and comparator operations. For instance, ==, <, <=, etc.
I/O
The class must print out a useful representation of itself when passed to the print function
Output
For formatting use the following:
duration = TimeSpan(1,2,3)
print(duration)
Should output:
Hours: 3, Minutes: 2, Seconds: 1
Please use this EXACT format.
The program for the implementation of the TimeSpan class is given below.
How to write the programclass TimeSpan:
def __init__(self, *args):
self.hours = 0
self.minutes = 0
self.seconds = 0
if len(args) == 1:
self.setTime(seconds=args[0])
elif len(args) == 2:
self.setTime(seconds=args[0], minutes=args[1])
elif len(args) == 3:
self.setTime(seconds=args[0], minutes=args[1], hours=args[2])
def getHours(self):
return self.hours
def getMinutes(self):
return self.minutes
def getSeconds(self):
return self.seconds
def setTime(self, seconds=0, minutes=0, hours=0):
self.seconds = round(seconds) % 60
self.minutes = (round(minutes) + (round(seconds) // 60)) % 60
self.hours = round(hours) + ((round(minutes) + (round(seconds) // 60)) // 60)
def __add__(self, other):
totalSeconds = self.hours*3600 + self.minutes*60 + self.seconds + other.hours*3600 + other.minutes*60 + other.seconds
return TimeSpan(totalSeconds)
def __sub__(self, other):
totalSeconds = self.hours*3600 + self.minutes*60 + self.seconds - (other.hours*3600 + other.minutes*60 + other.seconds)
return TimeSpan(totalSeconds)
def __neg__(self):
return TimeSpan(-self.getSeconds(), -self.getMinutes(), -self.getHours())
def __iadd__(self, other):
return f"Hours: {self.getHours()}, Minutes: {self.getMinutes()}, Seconds: {self.getSeconds()}"
Learn more about program on
https://brainly.com/question/26642771
#SPJ4
describe and contrast the data variability characteristics of operational databases, data warehouses, and big data sets.
Operational databases have low variability with consistent, structured data for real-time transactions, data warehouses have moderate variability with structured and some semi-structured data for analysis, and big data sets have high variability with diverse data types for discovering insights.
Operational databases are used for day-to-day business operations and primarily store structured data. They exhibit low variability, as the data is consistent and follows a predefined schema. In these databases, the focus is on real-time transaction processing, data consistency, and maintaining the integrity of the information.
Data warehouses, on the other hand, are designed for data analysis and reporting. They store large volumes of historical, structured data from various sources and can handle some semi-structured data as well. Data warehouses have moderate variability, as the data is collected from different sources and transformed into a common schema for analysis purposes. The focus is on data integration, aggregating data, and providing a unified view for better decision-making.
To know more about Operational databases visit:-
https://brainly.com/question/31785856
#SPJ11
uhura has just accepted an ssl certificate, but she's not comfortable about the source and now wishes to make it "go away." what should she do?
If Uhura has accepted an SSL certificate but is uncomfortable with the source and wants to remove it, she can follow these steps:
Open the browser settings or preferences menu.
Look for the section related to security or certificates.
Find the list of trusted certificates or certificate authorities (CAs).
Locate the specific SSL certificate that she wants to remove.
Select the certificate and choose the option to delete or remove it.
Confirm the action when prompted.
By removing the SSL certificate from the list of trusted certificates, the browser will no longer recognize it as a valid certificate from a trusted source. It is important to note that removing a certificate may result in the browser displaying warnings or errors when trying to access websites secured with that certificate.
Know more about SSL certificate here;
https://brainly.com/question/32251706
#SPJ11
Gears A and B of mass 10 kg and 50 kg have a radii of gyration about their respective mass centers of k_A = 80 mm and k_B = 150 mm. If gear A is subjected to the couple moment M = 10 Nm when it is at rest, determine the angular velocity of gear B when t = 5s.
According to the given problem, angular velocity of gear B when t=5s is
is approximately 0.0142 rad/s.
We can use the principle of conservation of angular momentum to solve this problem.
Initially, gear A is at rest and gear B is not moving, so the total angular momentum of the system is zero.
When gear A is subjected to the couple moment M, it begins to rotate with an angular acceleration given by:
α_A = M / I_A
where I_A is the moment of inertia of gear A about its center of mass.
Since gear A is a solid disk, we can use the formula for the moment of inertia of a disk:
I_A = (1/2) m_A k_[tex]A^{2}[/tex][tex]m^{2}[/tex]
where m_A is the mass of gear A.
Substituting the given values, we get:
I_A = 0.04 kg·[tex]m^{2}[/tex]
Using the same formula, we can find the moment of inertia of gear B:
I_B = (1/2) m_B k_[tex]B^{2}[/tex]
I_B = 5.625 kg·[tex]m^{2}[/tex]
Since the total angular momentum of the system is conserved, we have:
L = I_A ω_A + I_B ω_B
where ω_A and ω_B are the angular velocities of gears A and B, respectively.
At t = 5 s, gear A has been rotating for 5 seconds, so its angular velocity is:
ω_A = α_A t = 2 rad/s
Substituting this value and the given values for I_A and I_B, we can solve for ω_B:
ω_B = (L - I_A ω_A) / I_B
We don't know the value of the total angular momentum L, but we can use the fact that the initial total angular momentum is zero.
Thus, we have:
L = I_A ω_A
Substituting this value and the given values for I_A and I_B, we get:
ω_B = (I_A ω_A) / I_B
ω_B = 0.0142 rad/s
Therefore, the angular velocity of gear B when t = 5 s is approximately 0.0142 rad/s.
For more such questions on Angular velocity:
https://brainly.com/question/29897297
#SPJ11
Moment of inertia, also known as rotational inertia, is a property of a rigid body that determines how difficult it is to change its rotational motion about a particular axis. It is the rotational analog of mass in linear motion. The moment of inertia of a body depends on its shape, mass distribution, and axis of rotation.
The moment of inertia of a rotating body is given by the product of the mass and the square of the radius of gyration, i.e., I = mk^2. Using this, we can calculate the moment of inertia of gears A and B:
I_A = 10 kg * [tex](0.08m)^{2}[/tex] = 0.064 kg*[tex]m^{2}[/tex]
I_B = 50 kg * [tex](0.15m)^{2}[/tex] = 1.125 kg*[tex]m^{2}[/tex]
The torque applied to gear A is M = 10 Nm. According to Newton's second law for rotational motion, the angular acceleration of gear A is given by:
α_A = M / I_A = 10 Nm / 0.064 kg*[tex]m^{2}[/tex] = 156.25 rad/[tex]s^{2}[/tex]
Since gear B is meshed with gear A, it will also rotate. The angular velocity of gear B can be found using the equation of rotational motion:
Ω_B = Ω_A + alpha_A * t
Since gear A is initially at rest, Ω_A = 0. Thus, after 5 seconds of rotation, the angular velocity of gear B is:
Ω_B = 0 + 156.25 rad/[tex]s^{2}[/tex] * 5 s = 781.25 rad/s
Therefore, the angular velocity of gear B after 5 seconds is 781.25 rad/s.
To know more about Newton's second law,
https://brainly.com/question/13447525
#SPJ11
the purpose of this section is to understand the basic steps involved in computer aided manufacturing (cam) using fusion 360 platform and create a nc code / gcode file.
The basic workflow outlined above should give you a good understanding of the process involved in using Fusion 360 for CAM and creating a G-code file.
What is Fusion 360 and how does it relate to CAM?Computer Aided Manufacturing (CAM) is the use of software and computer-controlled machines to automate the manufacturing process. Fusion 360 is a popular CAM software platform that allows users to create toolpaths for CNC machines and generate G-code files. Here are the basic steps involved in using Fusion 360 for CAM and creating a G-code file:
Create a CAD model: The first step in the CAM process is to create a 3D model of the part you want to manufacture using Fusion 360's CAD tools.Set up the CAM environment: Once the 3D model is complete, switch to the CAM environment and create a new setup. This involves defining the machine you'll be using, the material you'll be cutting, and the tools you'll be using.Create the toolpaths: With the setup complete, it's time to create the toolpaths. Fusion 360 has a wide range of toolpath strategies to choose from, such as 2D Contour, Adaptive Clearing, and 3D Pocket. These strategies define how the cutting tool will move across the material to remove material and create the desired shape.Simulate the toolpaths: Before generating the G-code file, it's important to simulate the toolpaths to make sure they will work as expected. Fusion 360 includes a powerful simulation engine that can show you how the cutting tool will move and remove material from the part.Generate the G-code: With the toolpaths simulated and verified, it's time to generate the G-code file. This is done by selecting the toolpaths you want to use and clicking the "Post Process" button. Fusion 360 will then generate the G-code file, which can be saved to a USB drive or other storage device and loaded into your CNC machine.It's worth noting that the specific steps involved in CAM will vary depending on the type of part you're manufacturing, the tools you're using, and the CNC machine you're working with.
The basic workflow outlined above should give you a good understanding of the process involved in using Fusion 360 for CAM and creating a G-code file.
Learn more about Fusion 360
brainly.com/question/30325402
#SPJ11
a 14 inch square precast concrete oile is to be driven to a depth of 30 feet in the soil profile shown below. what is the approximate allowable capacity of the pile? sand theta=30degrees v=110pct
The approximate allowable capacity of the pile depends on factors such as bearing capacity factor (Nc), safety factor (fs), and soil cohesion (sc), which need to be provided or determined by an engineer or geotechnical expert.
What is the approximate allowable capacity of a 14-inch square precast concrete pile?To determine the approximate allowable capacity of the pile, we need to consider the soil profile and the given soil parameters.
Given that the soil is sand with an angle of internal friction (theta) of 30 degrees and a relative density (V) of 110%, we can use the bearing capacity equation for a driven pile in sand:
Qa = Ap ˣ Nc ˣ sc ˣ fs
Where:
Qa = Allowable capacity of the pile
Ap = Pile cross-sectional area (14 inches * 14 inches)
Nc = Bearing capacity factor (dependent on soil properties)
sc = Soil cohesion (assumed to be zero for sand)
fs = Safety factor
The values for Nc and fs can vary depending on the specific project requirements and design standards.
These values need to be provided or determined by the engineer or geotechnical expert to calculate the approximate allowable capacity of the pile accurately.
Learn more about capacity
brainly.com/question/30630425
#SPJ11
Design a digital circuit using D flip-flops to control the shut-down sequence for a thin film deposition system used in the fabrication of integrated circuits. The systems engineer has provided the following specification: The control circuit has one input: EN (Enable) and three outputs: S1. (Sequence 2) S2. (Sequence 1) S3. (Sequence ) When the system begins to power down, the outputs (S., S., Sc) will be 000. The outputs will remain in this state until EN = 1, when the outputs will transition through the following sequence: 000, 111, 100, 110, 101, 011.
Once complete, the outputs will remain in their final state. Should the Enable input change to zero (EN - 0) at any time, the sequence will halt and the outputs will remain in their current state until the Enable input changes back to one (EN - 1), at which time the sequence will resume. Use the given signal names for the variables in your solution (EN, S., S.S.). Do not substitute different variable names. Hints: • The flip flop states can be the outputs. That is, make the flip-flop outputs the circuit outputs
. Use don't care states as appropriate.
Here's one possible solution using D flip-flops:
css
Copy code
_____ _____ _____
EN _| |_______| |_______| |
_______ _______ | AND
S1 D --| Q |_______| Q |___| |___ S2
|______| |______| |
_______ _______ |
S2 D --| Q |_______| Q |_______|
|______| |______| |
_______ _______ |
S3 D --| Q |_______| Q |_______|
|______| |______|
The circuit uses three D flip-flops to store the sequence outputs (S1, S2, S3).
The output of each flip-flop (Q) is connected to one input of an AND gate, along with the EN input.
The output of the AND gate is connected to the D input of the next flip-flop in the sequence.
When EN is high (1), the AND gate allows the current flip-flop state to be passed to the next flip-flop in the sequence, and the sequence progresses through the specified states (000, 111, 100, 110, 101, 011).
If EN goes low (0), the AND gate output goes low, which causes the current flip-flop state to be held, and the sequence stops until EN goes high again.
The circuit uses don't-care states in the flip-flop inputs (i.e., not explicitly specified to be 0 or 1) to simplify the design and reduce the number of gates required.
Learn more about flip-flops here:
https://brainly.com/question/31676519
#SPJ11
Three routes connect a suburban origin and a downtown destination (x in kvph; t in minutes):
Route #1: t_{1} = 4 + 2x_{1}
Route #2: t_{2} = 8 + 1x_{2} Route #3: t_{3} = 9 + 2x_{3}
aIf the total O/D flow is 5.0 kvph, find the User Equilibrium (UE) flow pattern {x,t}bIf the total O/D flow is 2.0 kvph, find the User Equilibrium (UE) flow pattern {x,t).
a) Find the UE flow pattern for 5.0 kvph: x1=0.833, x2=2.500, x3=1.667; t1=6.667, t2=10.000, t3=12.333
b) Find the UE flow pattern for 2.0 kvph: x1=0.200, x2=1.200, x3=0.600; t1=4.400, t2=9.000, t3=9.800.
To find the User Equilibrium (UE) flow pattern, we need to assume that travelers choose their routes based on minimizing their individual travel time.
When the total O/D flow is 5.0 kvph, we can set up the system of equations using the given route equations and the fact that the total flow on all routes should be equal to 5.0 kvph.
Solving this system, we get the UE flow pattern as {x1=0.5, t1=5, x2=2, t2=10, x3=2.5, t3=13}.
This means that 0.5 kvph of traffic will use Route 1, 2 kvph will use Route 2, and 2.5 kvph will use Route 3, resulting in corresponding travel times of 5, 10, and 13 minutes respectively.
Similarly, when the total O/D flow is 2.0 kvph, we can solve the system of equations to get the UE flow pattern as {x1=0, t1=4, x2=2, t2=10, x3=0, t3=9}.
This means that no traffic will use Route 1 and Route 3, and all traffic will use Route 2 resulting in a travel time of 10 minutes.
For more such questions on Flow pattern:
https://brainly.com/question/30736973
#SPJ11
Problem #5 (10pts) Design the source follower in the following figure for a drain current of 1mA and a voltage gain of 0.8. Assume μnCox=100μA/V2, VTH=0.4V, λ=0, VDD=1.8V, and RG=50kΩ. Find RG ,Rs ,and (W/L).
The source follower in the figure with the given specifications. Our goal is to find RG, Rs, and (W/L) for a drain current of 1mA and a voltage gain of 0.8.
Step 1: Calculate the transconductance (gm) We are given the voltage gain (A_v) as 0.8, and we know that A_v = gm * Rs. We need to find gm to determine Rs later. Step 2: Calculate the overdrive voltage (V_ov)
Since we know the drain current (I_D) is 1mA and μnCox = 100μA/V^2, we can calculate V_ov using the formula:
I_D = 0.5 * μnCox * (W/L) * V_ov^2. Step 3: Calculate the gate-source voltage (V_gs)
Now that we have V_ov, we can calculate V_gs using the given threshold voltage (V_TH) of 0.4V:
V_gs = V_ov + V_TH
Step 4: Calculate RG We are given RG as 50kΩ, so we don't need to calculate it. Step 5: Calculate Rs Since we now have gm and A_v, we can find Rs using the equation: A_v = gm * Rs Step 6: Calculate (W/L) Now that we have V_ov, we can find (W/L) using the previously mentioned formula for I_D. Rearrange the formula to solve for (W/L):
(W/L) = 2 * I_D / (μnCox * V_ov^2)
By following these steps, you will find the values for RG, Rs, and (W/L) for the source follower circuit with the given specifications.
To know more about drain current visit:-
https://brainly.com/question/15998647
#SPJ11
design a cam to move a follower at a constant velocity of 100 mm/sec for 2 sec then return to its starting position with a total cycle time of 3 sec.
To design a cam to move a follower at a constant velocity of 100 mm/sec for 2 sec and then return to its starting position with a total cycle time of 3 sec, we can follow these steps:
Determine the maximum lift of the cam: The maximum lift of the cam is the distance the follower travels during the cycle. We can assume a maximum lift of 100 mm for this example.Determine the motion profile: We need the follower to move at a constant velocity of 100 mm/sec for 2 sec, then return to its starting position with a total cycle time of 3 sec. This means the follower will move a total distance of 200 mm in the first 2 sec, then move back to its starting position in the remaining 1 sec.Determine the cam profile: We can use a mathematical function to generate the cam profile. One commonly used function is the polynomial function, which can be represented as a series of coefficients. For this example, we can use a cubic polynomial function with the following coefficients:a0 = 0
a1 = 0
a2 = (12/4) * (100/2)^(-2)
a3 = -(6/4) * (100/2)^(-3)
This function will generate a cam profile with the desired motion profile.
Verify the cam profile: We can use a computer-aided design (CAD) software to create a 3D model of the cam and follower, and then simulate the motion to verify that the follower moves at the desired velocity and returns to its starting position within the specified cycle time.Manufacture the cam: Once the cam profile is verified, we can manufacture the cam using a CNC machine or other manufacturing methods.Assemble and test: Finally, we can assemble the cam and follower, and test the motion to ensure it meets the desired specifications.To know more about CAM, visit:
brainly.com/question/30325402
#SPJ11
The chromatograms of caffeine in 80/20 pH 4 phosphoric acid buffer/methanol and 80/20 pH-0.5 hydrochloric acid/methanol are shown on the following page. Explain the difference in terms of intermolecular interactions. (This should require four to five sentences.) pKa of protonated caffeine is 0.6 O CH3 CHa + H CH3 CH3 H protonated caffeine caffeine
The differences in Intermolecular interactions between the protonated and non-protonated caffeine molecules in the two solvent systems result in distinct chromatographic behaviors.
The difference in chromatograms of caffeine in 80/20 pH 4 phosphoric acid buffer/methanol and 80/20 pH-0.5 hydrochloric acid/methanol can be explained by the intermolecular interactions involved. At pH 4, the protonated caffeine with a pKa of 0.6 is partially deprotonated, leading to a mixture of protonated and non-protonated caffeine molecules. These molecules interact with the polar stationary phase through hydrogen bonding and dipole-dipole interactions.On the other hand, at pH-0.5, the acidic environment favors the protonation of caffeine molecules, resulting in a higher proportion of protonated caffeine. These protonated molecules exhibit stronger ionic interactions with the stationary phase, which can affect their retention time and separation on the chromatogram. Overall, the differences in intermolecular interactions between the protonated and non-protonated caffeine molecules in the two solvent systems result in distinct chromatographic behaviors.
To know more about Intermolecular .
https://brainly.com/question/13588164
#SPJ11
The difference in the chromatograms of caffeine in the two different solvent systems can be attributed to the intermolecular interactions between the caffeine molecules and the solvent molecules. In the pH 4 phosphoric acid buffer/methanol system, the caffeine molecules are more likely to form hydrogen bonds with the polar solvent molecules, resulting in a slower elution time and a sharper peak in the chromatogram. In the pH-0.5 hydrochloric acid/methanol system, the solvent molecules are more acidic and can form stronger ion-dipole interactions with the caffeine molecules, resulting in a faster elution time and a broader peak in the chromatogram. Overall, the intermolecular interactions between the caffeine and the solvent molecules play a crucial role in determining the separation and elution of the compound in chromatography.
learn more about chromatograms here
https://brainly.com/question/30086631
#SPJ11
determine whether the string 01001 is in each of these sets. a) {0, 1}∗ b) {0}∗{10}{1}∗ c) {010}∗{0}∗{1} d) {010, 011} {00, 01} e) {00} {0}∗{01} f ) {01}∗{01}∗
a) {0, 1}* - The asterisk (*) means that any combination of 0s and 1s can occur any number of times. Therefore, the string 01001 is in this set.
b) {0}*{10}{1}* - This set requires the string to start with any number of 0s, followed by 10, and then any number of 1s. The string 01001 does not start with any 0s, so it is not in this set.
c) {010}*{0}*{1} - This set requires the string to have any number of repetitions of 010, followed by any number of 0s, and then one 1. The string 01001 does match this pattern and is in this set.
d) {010, 011} {00, 01} - This set requires the string to match one of the options in the first set (either 010 or 011), followed by one of the options in the second set (either 00 or 01). The string 01001 does not match either of the options in the second set, so it is not in this set.
e) {00} {0}*{01} - This set requires the string to start with 00, followed by any number of 0s, and then 01. The string 01001 does not start with 00, so it is not in this set.
f) {01}*{01}* - This set requires the string to have any number of repetitions of 01, followed by any number of repetitions of 01 again. The string 01001 does not have any repetitions of 01, so it is not in this set.
To know more string word click here
brainly.com/question/30099412
#SPJ11
This Point class has two constructors. The working constructor has been implemented. Implement the default constructor as a delegating constructor, using the working constructor to do the actual work. print.cpp 1 #include "point.h" 2 3 Point::Point() 4 { 5 // body is empty 6 } point.h 1 #ifndef POINT_H 2 #define POINT_H 3 4 class Point 5 { 6 public: 7 Point(); 8 Point(int x, int y);
9 private: 10 int m_x; 11 12 }; 13 14 #endif int m_y;
To implement the default constructor as a delegating constructor, call the working constructor from within the default constructor using "Point::Point() : Point(0, 0) {}".
To implement the default constructor for the Point class as a delegating constructor, we can simply call the working constructor from within the default constructor using the syntax "Point::Point() : Point(0, 0) {}".
This will initialize the object's x and y coordinates to 0 using the existing working constructor implementation.
This approach is useful for avoiding code duplication when multiple constructors need to perform the same initialization logic.
The resulting Point class will have both a default constructor and a working constructor that initializes the x and y coordinates.
For more such questions on Default constructor:
https://brainly.com/question/30511244
#SPJ11
In object-oriented programming, a constructor is a special method that is called when an object is created. It is used to initialize the object's attributes and to ensure that the object is in a valid state. A constructor typically has the same name as the class it belongs to and does not have a return type.
Here is the updated implementation of the `Point` class with a delegating default constructor:
// point.h
#ifndef POINT_H
#define POINT_H
class Point
{
public:
Point() : Point(0, 0) {} // delegating constructor
Point(int x, int y);
private:
int m_x;
int m_y;
};
#endif
// point.cpp
#include "point.h"
Point::Point(int x, int y)
: m_x(x), m_y(y)
{
// body is empty
}
In this implementation, the default constructor `Point::Point()` is defined as a delegating constructor, which calls the parameterized constructor `Point::Point(int x, int y)` with default arguments `(0, 0)`. This ensures that any instance of `Point` created using the default constructor will have its `m_x` and `m_y` member variables initialized to `0`. The parameterized constructor is defined as before, taking two integer arguments `x` and `y`, and initializing the corresponding member variables.
To know more about object-oriented programming,
https://brainly.com/question/3522354
#SPJ11
Let Y and Z be two independent standard normal random variables (l.e. gaussians mean zero and variance 1 each). Define another random variable X as X=aY+Z
where a =8.801
What is the covariance between X , Y
The covariance between two random variables X and Y is a measure of how they change together. So, the covariance between X and Y is 8.801.
Covariance can be calculated using the formula Cov(X, Y) = E[(X - E[X])(Y - E[Y])]. In your case, X is defined as X = aY + Z, where Y and Z are two independent standard normal random variables with mean zero and variance 1 each, and a = 8.801.
Since Y and Z are independent, their covariance is 0, which means E[YZ] = 0. Also, the means of Y and Z are 0, so E[X] = a * E[Y] + E[Z] = 0.
Now, we can find the covariance between X and Y:
Cov(X, Y) = E[(X - E[X])(Y - E[Y])] = E[(aY + Z)(Y - 0)] = E[aY² + YZ] = a * E[Y²] + E[YZ].
As mentioned earlier, E[YZ] = 0, and E[Y²] is the variance of Y, which is 1. Therefore, Cov(X, Y) = a * 1 + 0 = 8.801. So, the covariance between X and Y is 8.801.
Learn more about covariance here:
https://brainly.com/question/28135424
#SPJ11
Consider the following recursive function, assuming 0 msn and n 2 1. int fun (int n, int m){ if ((n == 1)|| (m == 0) || (m = n)) return (1); else return (fun (n - 1, m) + fun (n - 1, m – 1)); } (a) What are fun (4,2)? 6 fun(5,3)?_10 ? fun(6,4)? 15 fun(8,3)? 56 fun (9,2)? 36 (b) What does this function do, given any m and n within the constraints? Compute the function for some smaller values of m and n; try to generalize; observe that the recursion ends in finite time; observe the similarity with how we wrote the recursive function for Fibonacci numbers in class; and then give a precise one sentence description of the purpose of the function.
(a) The values of the given recursive function fun are:
- fun(4,2) = 6
- fun(5,3) = 10
- fun(6,4) = 15
- fun(8,3) = 56
- fun(9,2) = 36
(b) This function calculates the binomial coefficient C(n, m), also known as "n choose m," which is the number of ways to choose m elements from a set of n elements. The function has a finite recursion and is similar to the recursive function for Fibonacci numbers.
If you need to learn more about recursive functions click here:
https://brainly.com/question/489759
#SPJ11