Answer:
Thermal Energy
Explanation:
The energies that work together to bake the bread and cook the eggs is the thermal energy. Thermal energy is basically heat energy, which makes the food warmer.
Thermal energy and chemical energy work together to bake the bread and cook the eggs.
What is thermal energy?The energy present in a system that determines its temperature is referred to as thermal energy. Thermal energy flows as heat. Thermodynamics is a whole field of physics that studies how heat is transmitted across various systems and how work is done in the process.
What is chemical energy?Chemical energy is described as: the power that is kept in chemical compound bonds (molecules and atoms). It is released during the chemical process, which is referred to as an exothermic reaction, which mostly generates heat as a byproduct.
When the bread is baked or the eggs are cooked, thermal energy is provided from outside and chemical energy inside the molecules of bread or eggs come to play. So, these two energies work together to bake the bread and cook the eggs.
Learn more about energy here:
https://brainly.com/question/1932868
#SPJ2
If your water heat has an efficiency of 95 percent, how much energy would it take to heat 45kg of water from 23 C to 60 C. (The specific heat of water is 4.18 J/g/C.) Please show your work
Answer: 6611.715 joules
Explanation:
Q = MxCxdeltaT = 6959.7 which is 100%
95% = 6611.715
In what way does water change when condensation occurs?
from gas to liquid
from liquid to solid
from liquid to gals
from solid to liquid
How much power does motor provides an elevator in a building when the total mass when loaded is 500 kg to a height of 3m in 25 seconds?
You push a 1.5 kg ball across a desk for 2 seconds, so that 10 J of work have been done. How much power was produced?
Answer
Answer:
i need help with the same question
Explanation:
Which subatomic particle identifies the element?
A.
protons
B.
electrons
C.
neutrons
D.
atomic mass
Answer:
A. Protons
Explanation:
Atomic number is an indicator of how many protons an element possesses in its nucleus. We use atomic number to identify an element. For example, carbon has 6 protons and an atomic number of 6.
19. In a turtle race, a 20 kg turtle moves with a velocity of 0.1 m/s. What is the kinetic energy of the turtle?
A. 20 J
B. 0.2 J
C. 0.1 J
The (BLANK) island were where Darwin made many important observations.
Answer:
I know theirs South American coast he was there a lot
What is the weight of a 25 kg object on Earth with an acceleration due to gravity of 9.8m/s/s?
2.45 n
24.5 n
245 n
2450 n
Which statement best describes this situation
Answer:
what situation?
Explanation:
Please help me with this 29 points
Answer:
)Give the definition of poverty line as defined by the World Bank.
Help please :)
Infrared waves are transmitted by ....... ?
Each vertical line on the graph is 1 millisecond (0.001 s) of time. What is the period and
frequency of the sound waves?
Help me!!!!!
Answer:
1000 Hz
Explanation:
please mark me as brainliest
An official major league baseball has a mass of 0.14 kg. A pitcher throws a 40 m/s fastball which is hit by the batter straight back up the middle at a speed of 46 m/s.
a) What is the change in momentum of the ball during the collision with the bat?
b) If this collision occurs during a time of 0.012 seconds, what is the average force exerted by the bat on the ball?
Answer:
(a) The change in momentum is 12.04 kg-m/s
(b) The force exerted by the bat is 1003.33 N
Explanation:
Given that,
The mass of a ball, m = 0.14 kg
Initial speed of the ball, u = 40 m/s
Final speed of the ball, v = -46 m/s
(a) The change in momentum of the ball during the collision with the bat is given by :
[tex]\Delta p=m(v-u)\\\\=0.14(-46-40)\\\\=-12.04\ kg-m/s[/tex]
(b) Time for collision, t = 0.012 s
Now the force can be calculated as follows :
[tex]F=\dfrac{\Delta p}{t}\\\\F=\dfrac{12.04}{0.012}\\\\=1003.33\ N[/tex]
Hence, this is the required solution.
Answer:
a. = 12.04 kg*m/s
b. = 1,003.3N
Explanation:
The answer above is correct.
What x rays travel at the speed of
During a circus act, an elderly performer thrills the crowd by catching a cannon ball shot at him. The cannon ball has a mass of 39.0 kg and its horizontal component of velocity is 6.50 m/s just before the 65.0 kg performer catches it. If the performer is initially motionless on nearly frictionless roller skates, what is his speed immediately after catching the cannon ball
Answer:
[tex]2.4375\ \text{m/s}[/tex]
Explanation:
[tex]m_1[/tex] = Mass of cannon ball = 39 kg
[tex]m_2[/tex] = Mass of performer = 65 kg
[tex]u_1[/tex] = Initial horizontal component of cannon ball's velocity = 6.5 m/s
[tex]u_2[/tex] = Initial horizontal component of performer's velocity = 0
v = Velocity of combined mass
As the momentum of the system is conserved we have
[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\Rightarrow v=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}\\\Rightarrow v=\dfrac{39\times 6.5+0}{39+65}\\\Rightarrow v=2.4375\ \text{m/s}[/tex]
The speed of the performer immediately after catching the cannon ball is [tex]2.4375\ \text{m/s}[/tex].
it takes a cheetah just 3s to reach its top speed of 30m/s what is it's acceleration
Given values are:
Speed,
v = 30 m/sTime,
t = 3 sAs we know,
→ [tex]Acceleration = \frac{Speed}{Time}[/tex]
or,
→ [tex]a = \frac{v}{t}[/tex]
By substituting the values,
[tex]= \frac{30}{3}[/tex]
[tex]= 10 \ m/s^2[/tex]
Thus the above solution is correct.
Learn more about acceleration here:
https://brainly.com/question/2325876
What are characteristics of wide-angle lenses?
An instructor wishes to determine the wavelength of the light in a laser beam. To do so, she directs the beam toward a partition with two tiny slits separated by 0.180 mm. An interference pattern appears on a screen that lies 5.30 m from the slit pair. The instructor's measurements show that two adjacent bright interference fringes lie 1.60 cm apart on the screen. What is the laser's wavelength (in nm) ?
Answer:
λ = 5.434 x 10⁻⁷ m = 543.4 nm
Explanation:
To solve this problem we can use the formula provided by Young's Double Slit experiment:
[tex]\Delta x = \frac{\lambda L}{d}\\\\\lambda = \frac{\Delta xd}{L}[/tex]
where,
λ = wavelength of light = ?
Δx = distance between adjacent bright fringes = 1.6 cm = 0.016 m
d = slit separation = 0.18 mm = 0.00018 m
L = Distance between slits and screen = 5.3 m
Therefore,
[tex]\lambda = \frac{(0.016\ m)(0.00018\ m)}{5.3\ m}[/tex]
λ = 5.434 x 10⁻⁷ m = 543.4 nm
A screw-jack used to lift a bus is a
A) first order lever
B) second order lever
C) pulley
D) screw
6xy from -12xy
please give me a answer this question
6 floors down from 12 floors underground = 18 floors underground.
6 degrees colder than 12 degrees below zero = 18 degrees below zero
6 brown cows taken away from -12 brown cows = -18 brown cows
6 cars sold from a dealer that 12 cars were stolen from = 18 cars gone
6xy taken away from -12xy = -18xy
weight is measured in units called
The weight is measured in a unit called Newton. The newton is a standard unit of weight measurements.
The International System of Units (SI) uses Newtons (N) as the unit of weight measurement. Weight is frequently expressed in pounds (lb) or ounces (oz) in some nations that employ the Imperial system. However, Newton is the accepted weight measurement unit in scientific and international contexts.
The International System of Units (SI) uses Newton as the primary unit of weight measurement. Sir Isaac Newton, a great physicist who significantly influenced our understanding of classical mechanics, is honored by having his name attached to it. Newton is the force needed to accelerate a mass of one kilogram by one meter per second squared in the SI system.
Hence, the weight is measured in a unit called Newton. The newton is a standard unit of weight measurements.
To learn more about weight, here:
https://brainly.com/question/34136037
#SPJ6
If a spring extends by 3 cm when a 4 N weight is suspended from it, find the extension
when the weight is changed to
(a) 8 N
(b) 10 N
(c) 14
it takes 840s to walk completely around a circular track, moving at a speed of 1.20m/s? what is the radius of the track?
Answer:
160.43 meters
Explanation:
T=(2*pi*r)/v
840=(2*pi*r)/1.2
1008=2*pi*r
504=pi*r
160.43=radius
The distance around the circular track is equal to its circumference. If it takes840 s to complete the path with a velocity of 1.20 m/s then the radius of the path will be 160 m.
What is velocity?Velocity is a physical quantity measuring the distance traveled by unit time. It is a vector quantity thus, characterized by its magnitude and direction. Velocity is usually expressed in m/s.
Velocity is the ratio of distance to the time taken to complete the travel. Thus, greater distance within short time indicates greater velocity.
Given that the time take to complete the circular path = 840 s
velocity = 1.20 m/s
distance = circumference of the circular path = 2πr.
distance = time × velocity
2πr = 840 s × 1.20 m/s
= 1008 m.
Therefore, the radius r of the circular path = 1008 m/ 2 π = 160 m.
Hence, the radius of the circular path 160 m.
To find more on velocity, refer here:
https://brainly.com/question/18084516
#SPJ2
Netwtons 1st law of motion
Answer:
Newton's first law states that, if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force. This postulate is known as the law of inertia.
Explanation:
Which word best completes the sentence?
Select the word from the drop-down menu
He is quite
Choose...
despite never having left his smalL TOWEN
Answer:
it’s cosmopolitan
Explanation:
k12
Help please :)
X-ray waves are transmitted by ....... ?
Answer:
im not sure maybe viberation
Explanation:
Answer:
X-ray waves are transmitted by ....... body tissues with very little absorption
Hope it helps
Please mark me as the brainliest
Thank you
when is an object considered to be in motion
Answer:
An object is considered to be in motion only when its position changes over time with reference to a point which will be known as orgin
Astronauts living on the International Space Station have zero gravitational acceleration.
True
False
An alumium rod when measured with a steel scale both being at 25 degree celcius appears to be 1 meter long. If the scale is correct at 0 degree celcius, what is the true length of the rod at 25 degree celcius? What wull be the length of rod at 0 degree celcius?
Suppose that a uniform rope of length L resting on a frictionless horizontal surface, is accelerated along the direction of its length by means of a force F, pulling it at one end. A mass M is accelerated by the rope. Assuming the mass of the rope to be m and the acceleration is a. Stated in terms of the product ma, what is the tension in the rope at the position 0.3 L from the end where the force F is applied if the mass M is 1.5 times the mass of the rope m?
Answer:
2.2 ma
Explanation:
Given :
Length of the rope = L
Mass of the rope = m
Mass of the object pulled by the rope = M
M = 1.5 m
So, L [tex]$\rightarrow$[/tex] m
For unit length [tex]$\rightarrow \frac{m}{L}$[/tex]
∴ 0.3 L = [tex]$0.3 \ L \left(\frac{m}{L}\right)$[/tex]
= 0.3 m
And for remaining 0.7 L = [tex]$0.7 \ L \left(\frac{m}{L}\right)$[/tex]
= 0.7 m
By Newtons law of motion,
F - T = ( 0.3 m) a .........(1)
T = ( M + 0.7 m) a
T = ( 1.5 m + 0.7 m) a
T = ( 2.2 m ) a ..............(2)
So from equation (1) and (2), we have
Tension on the rope
T = 2.2 ma